REDmi Note 9 i need help

gruka

Active Member
Jul 26, 2017
28
1
africa
Skype
[email protected]
how may i revive Redmi note 9 ,i bricked the phone trying to root it and then phone can not go into fast boot mode nor recovery mode,screen is blank and the only connection in the device manager is when USB is connected phone connects for 40 seconds then disconnect about 20 seconds it reconnects so forth continuously
 
Last edited:

gruka

Active Member
Jul 26, 2017
28
1
africa
Skype
[email protected]
Tried to flash i get this error below may someone help please or give the guide lines AUTH info: MTK, version: 1
Firmware package: [download] merlin_eea_global_images_V12.0.5.0.QJOEUXM_20201212.0000.00_10.0_eea_e55a609a08.tgz
BROM version[0]: 7.2021.1.0
DA: MTK_AllInOne_DA[3].bin
hash: de72b58aa3a3556eeafbf72771c921386d32aafb, size: 3.69 MiB
version: 3.3001.2020/07/02021/01/17 06:28:46, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM18)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
Sending Download Agent...
[SERVER] Error: this version of software is outdated, please synchronize !
Error: 6004 (S_SECURITY_SLA_FAIL)
[AUTH] Serial link authentication failed
Platform: MT6768_S00, Hw ver: 0xCA00, Sw ver: 0x0000
Secure config: 0xE7
Error: 6004 (S_SECURITY_SLA_FAIL)
[AUTH] Serial link authentication failed
 

gruka

Active Member
Jul 26, 2017
28
1
africa
Skype
[email protected]
i tried for the second time it connected and has taken 4 credits connected for 40seconds then disconnect ,after 20 second it reconnect. EXpert what do i need to do since it connect and disconnect by itself then reconnects ,disconnect, Just repeating. below is the log data
AUTH info: MTK, version: 1
BROM version[1]: 7.2021.1.0
DA: MTK_AllInOne_DA[3].bin
hash: de72b58aa3a3556eeafbf72771c921386d32aafb, size: 3.69 MiB
version: 3.3001.2020/07/02021/01/17 22:33:21, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM18)
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
Requesting flash signature from server...
[SERVER] XIAOMI_FL [merlin,8069d12e31816920] ref id: XF03257829141, cost: 4, your balance: 6
Sending Download Agent...
Platform: MT6768, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
SRAM size: 448 KiB
DRAM size: 4 GiB
SOC ID: 8069d12e31816920532501b6bf72d2485aa520678cf893a41e06393f6e66c13c
ME ID: b44d0478a2c0fce9285f6700f6287c6f
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x13 (Micron)
Product name: S0J9J8 (0x53304a394a38), rev: 0x10, serial number: 0x1EB69056
Manufacturing date: Jul 2020
CID: 13014E53 304A394A 38101EB6 90567731
Capacity: 58.27 GiB (62,562,238,464 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB (Provisioned)
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: High-Speed

Verifying Soc: passed
Verifying Storage ID: passed
Writing preloader: preloader_merlin.bin, size: 283.75 KiBWriting recovery: recovery.img, size: 64 MiBError: 0xC0050003 (STATUS_DOWNLOAD_EXCEPTION)
Error while flashing images at 0x03200000, please make sure your USB connection is stable.
 

rashid shaikh

Active Member
Apr 5, 2017
38
16
mumbai
Sonork ID
100.1677440
i tried for the second time it connected and has taken 4 credits connected for 40seconds then disconnect ,after 20 second it reconnect. EXpert what do i need to do since it connect and disconnect by itself then reconnects ,disconnect, Just repeating. below is the log data
AUTH info: MTK, version: 1
BROM version[1]: 7.2021.1.0
DA: MTK_AllInOne_DA[3].bin
hash: de72b58aa3a3556eeafbf72771c921386d32aafb, size: 3.69 MiB
version: 3.3001.2020/07/02021/01/17 22:33:21, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM18)
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
Requesting flash signature from server...
[SERVER] XIAOMI_FL [merlin,8069d12e31816920] ref id: XF03257829141, cost: 4, your balance: 6
Sending Download Agent...
Platform: MT6768, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
SRAM size: 448 KiB
DRAM size: 4 GiB
SOC ID: 8069d12e31816920532501b6bf72d2485aa520678cf893a41e06393f6e66c13c
ME ID: b44d0478a2c0fce9285f6700f6287c6f
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x13 (Micron)
Product name: S0J9J8 (0x53304a394a38), rev: 0x10, serial number: 0x1EB69056
Manufacturing date: Jul 2020
CID: 13014E53 304A394A 38101EB6 90567731
Capacity: 58.27 GiB (62,562,238,464 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB (Provisioned)
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: High-Speed

Verifying Soc: passed
Verifying Storage ID: passed
Writing preloader: preloader_merlin.bin, size: 283.75 KiBWriting recovery: recovery.img, size: 64 MiBError: 0xC0050003 (STATUS_DOWNLOAD_EXCEPTION)
Error while flashing images at 0x03200000, please make sure your USB connection is stable.
Download da and tool from here then try flash cinnect phone without press anykey if phone did not connect the hold vol +
Flash tool:- Redmi note 9 Merlin flash Tool
Firmware:- merlin_in_global_images_V12.0.4.0.QJOINXM_20200911.0000.00_10.0_in_746b10b617.tgz.gz



Tell us after use tool and da tested but i am not tested yet
 

Attachments

  • note9 pass.txt
    10 bytes · Views: 32

gruka

Active Member
Jul 26, 2017
28
1
africa
Skype
[email protected]
I have done as per instructions but my connection is not stable, when i connect the phone it only connects for a few secs then disconnect, after some seconds it reconnects again, i think i messed up with the boot loader
 

gruka

Active Member
Jul 26, 2017
28
1
africa
Skype
[email protected]
if possible give me your wghat app number i send you the video clip of what is happening in the device manager on connection
 

Attachments

  • device connection.jpg
    device connection.jpg
    94 KB · Views: 24
  • error1.jpg
    error1.jpg
    125.5 KB · Views: 24

gruka

Active Member
Jul 26, 2017
28
1
africa
Skype
[email protected]
Hey i managed reviving the phone using another box but now when i try to write the original imei i get the error below,may the experts from uFI help advise what an suppose to do and give the guide lines (Error116 )
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Using Port:
Boot META MODE...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM18)
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Boot META MODE from BootROM ... Requesting flash signature from server...
[SERVER] Error: Undefined phone id, please report this issue to support !
error 116
 

Attachments

  • IMEI WRITE ERROR.jpg
    IMEI WRITE ERROR.jpg
    146.6 KB · Views: 17

bpccell7

Junior Member
Nov 2, 2019
3
0
help problem
Error: 0x00000FA1 (S_FT_DA_NO_RESPONSE)
[DA] DA didn't send response data
redmi note 9 merlin
 
Top