UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available).
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-A500FU
Selected port: COM50 SAMSUNG Mobile USB Serial Port
Software version: 45.14
Checking Login and Password... OK
Balance: 250 crd.
You have 250 credit(s) left. This operation takes 50 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A500FU
Android version: 6.0.1
PDA version: A500FUXXU1CSB1
CSC version: A500FUBTU1CSB1
Phone version: A500FUXXU1CPI2
Product code: SM-A500FZKUBTU
CSC country code: UK & IRE
CSC sales code: BTU
Phone SN: RF8G30G2Q5Y
IMEI: 358022069431692
HW version: MP 0.200
RF cal date: 2015.03.07
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM50
Reading phone info... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Executing... OK
Searching Ramdump interface... COM3 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code(MCK, PUK): 52704959
NET lock: 09514685
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.45.14 [SM-A500FU,Read Codes via Server]
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available).
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-A500FU
Selected port: COM50 SAMSUNG Mobile USB Serial Port
Software version: 45.14
Checking Login and Password... OK
Balance: 250 crd.
You have 250 credit(s) left. This operation takes 50 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A500FU
Android version: 6.0.1
PDA version: A500FUXXU1CSB1
CSC version: A500FUBTU1CSB1
Phone version: A500FUXXU1CPI2
Product code: SM-A500FZKUBTU
CSC country code: UK & IRE
CSC sales code: BTU
Phone SN: RF8G30G2Q5Y
IMEI: 358022069431692
HW version: MP 0.200
RF cal date: 2015.03.07
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM50
Reading phone info... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Executing... OK
Searching Ramdump interface... COM3 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code(MCK, PUK): 52704959
NET lock: 09514685
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.45.14 [SM-A500FU,Read Codes via Server]