Logs
Code:
Welcome to Octoplus Box Samsung software version 2.7.1
-----------------------------------------------------------------------------------
To connect SM-G928T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected AP file: E:\SAMSUNG\G928T 7.0\SM-G928T_6.0.1_
20170327130013_dpmc0wd4yi\G928TUVU4DQC2_G928TTMB4DQC2
_G928TUVU4DQC2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G928T into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.