Logs
Code:
-----------------------------------------------------------------------------------
To connect SM-G935F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected BOOT file: E:\SAMSUNG\G935f 6.0 OK\G935FXXS1BPJ1
_G935FOXX1BPH1_ROM 6.0 OK\G935FXXS1BPJ1_G935FOXX1BPH1
_ROM 6.0 OK\BL_G935FXXS1BPJ1_CL8888212_QB11110434_REV00
_user_low_ship.tar.md5
Selected AP file: E:\SAMSUNG\G935f 6.0 OK\G935FXXS1BPJ1
_G935FOXX1BPH1_ROM 6.0 OK\G935FXXS1BPJ1_G935FOXX1BPH1
_ROM 6.0 OK\AP_G935FXXS1BPJ1_CL8888212_QB11110434_REV00
_user_low_ship.tar.md5
Selected CP file: E:\SAMSUNG\G935f 6.0 OK\G935FXXS1BPJ1
_G935FOXX1BPH1_ROM 6.0 OK\G935FXXS1BPJ1_G935FOXX1BPH1
_ROM 6.0 OK\CP_G935FXXU1BPHJ_CL9113173_QB10764867_REV00
_user_low_ship.tar.md5
Selected CSC file: E:\SAMSUNG\G935f 6.0 OK\G935FXXS1BPJ1
_G935FOXX1BPH1_ROM 6.0 OK\G935FXXS1BPJ1_G935FOXX1BPH1
_ROM 6.0 OK\CSC_OXX_G935FOXX1BPH1_CL8921866_QB10562421
_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.