Logs
Code:
Welcome to Octoplus Box Samsung software version 2.7.1
-----------------------------------------------------------------------------------
To connect SM-J200H phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected BOOT file: C:\Users\test\Desktop\SM-J530F_1_
20180905210414_nxmojy4c8j_fac\BL_J530FXWU3BRI1_CL14125461
_QB19601519_REV00_user_low_ship.tar.md5
Selected AP file: C:\Users\test\Desktop\SM-J530F_1_20180905210414
_nxmojy4c8j_fac\AP_J530FXWU3BRI1_CL14125461_QB19601519
_REV00_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\test\Desktop\SM-J530F_1_20180905210414
_nxmojy4c8j_fac\CP_J530FXXU3BRH8_CP10652510_CL14125461
_QB19577723_REV00_user_low_ship.tar.md5
Selected CSC file: C:\Users\test\Desktop\SM-J530F_1_
20180905210414_nxmojy4c8j_fac\CSC_OJV_J530FOJV3BRI2
_CL14125461_QB19644115_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J530F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.