SAMSUNG SM-A305F EMMC PINOUT GIFT FROM MR.AD

MWAMBELA2

Active Member
Dec 19, 2019
17
5
I tried to use the ISP pinout above to repair dead boot Samsung A30 but it gives error what is wrong please help!!!!!!!!!!!!


Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number:
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for OLD moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---
 

melltoo

Member
Mar 7, 2019
10
0
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed

Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: CUTA42 (0x435554413432), rev: 0x00, serial number:
Manufacturing date: May 2019
CID: 15010043 55544134 32007A06 FA7C5642
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x08
No boot acknowledge is sent (default)
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
crypto state: encrypted?

ANDROID System Info:
platform: exynos5, cpu abi: arm64-v8a
manufacturer: samsung
board: universal7885, name: a30dd
brand: samsung, model: SM-A305F
build model list: SM-A305F
build id: PPR1.180610.011, version: 9 Pie (PPR1.180610.011.A305FDDU2ASF3)
build description: a30dd-user 9 PPR1.180610.011 A305FDDU2ASF3 release-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMCUT000A4-2XXX/64G
 

ifone

Active Member
Jul 21, 2020
76
12
Papua New Guinea
This pinout is correct but getting this error when trying to flash pit file.

Here is my log: Phone has no power.

Interface: UFI High-Speed
Serial number: 0011-8839-6951
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: CUTA42 (0x435554413432), rev: 0x00, serial number: 0xA0AAC6A4
Manufacturing date: Jul 2019
CID: 15010043 55544134 3200A0AA C6A476A8
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Re-partitioning... Done
Writing MBR, GPT at 0x00000000-0x000043FF (34 sectors)... Failed to write block 0x00000000:17408 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
Processing file: "A30_SWA_OPEN.pit\", size: 5.31 KiB...
Writing PIT at 0x00004400-0x000063FF (10 sectors)... Failed to write block 0x00004400:5120 (return code: 1, CMD Error: Timeout)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
Setting boot partition config to 0x48... [179]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
Done
Setting boot bus conditions to 0x01... [177]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
Done
 

sandybridge

Active Member
Jan 11, 2019
29
5
Algeria
The isp is fine.
But it’s pointless.
Most direct isp operations on ufi would return an error.


Writing PIT at 0x00004400-0x000063FF (10 sectors)... Failed to write block 0x00004400:5120 (return code: 1, CMD Error: Timeout)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
Setting boot partition config to 0x48... [179]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
Done
Setting boot bus conditions to 0x01... [177]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
Done

A simple factory reset operation would kill your phone and you won’t be able to write back ext_cds file.

So caution advised when dealing with that device.
 
Top