Tecno i3 FRP Bypass Without Box | Tecno I3 FRP Lock Remove File
Download Tecno i3 FRP Tool, Drivers and Tecno i3 FRP Reset File
Tecno i3 FRP Bypass Tool [SP Flash Tool] : DOWNLOAD
Tecno i3 FRP Reset File: DOWNLOAD
Remove Tecno i3 Google Account Verification
-Extract “FRP Tool” and “FRP File” on your PC.
-Then open the FRP tool folder.
-There you can see “SP Flash Tool” folder.
-Open “SP Flash Tool” folder.
-Then find and Run as Administrator “SP Flash Tool.exe“.
-After that, Goto “Download” tab.
-Now Click on the “Choose” from the “Download-Agent“.
-Download –Agent – Load DA_SWSEC.bin file from “Tecno i3 FRP” folder.
-Then click on “Choose” from “Scatter-loading File“
-Now give there file path of “Scatter” file.
-you can find scatter file from the FRP file folder.
After that, go to the “Format” tab.
-Select “Manual Format Flash” from that tab.
-Give below address from that box.or you can find Address also in you FRP File.
Now Techno i3 Bypass FRP:
-Then power off your Techno i3.
-Now connect your Techno Camon IN5 to PC.
-While connecting press (Volume Down) key, and connect your Techno i3.
Note:- Make sure, before you connect your device to PC, you need to download and install USB Driver first on your PC. when you connect your device to PC keep pressing Volume down key few more seconds after connecting.
-After that, Click on “Start” button from sp flash tool to Techno i3 Bypass FRP.
Download Tecno i3 FRP Tool, Drivers and Tecno i3 FRP Reset File
Tecno i3 FRP Bypass Tool [SP Flash Tool] : DOWNLOAD
Tecno i3 FRP Reset File: DOWNLOAD
Remove Tecno i3 Google Account Verification
-Extract “FRP Tool” and “FRP File” on your PC.
-Then open the FRP tool folder.
-There you can see “SP Flash Tool” folder.
-Open “SP Flash Tool” folder.
-Then find and Run as Administrator “SP Flash Tool.exe“.
-After that, Goto “Download” tab.
-Now Click on the “Choose” from the “Download-Agent“.
-Download –Agent – Load DA_SWSEC.bin file from “Tecno i3 FRP” folder.
-Then click on “Choose” from “Scatter-loading File“
-Now give there file path of “Scatter” file.
-you can find scatter file from the FRP file folder.
After that, go to the “Format” tab.
-Select “Manual Format Flash” from that tab.
-Give below address from that box.or you can find Address also in you FRP File.
- Begin Address [HEX]: 0x6a00000
- Format Length [HEX]: 0x100000
Now Techno i3 Bypass FRP:
-Then power off your Techno i3.
-Now connect your Techno Camon IN5 to PC.
-While connecting press (Volume Down) key, and connect your Techno i3.
Note:- Make sure, before you connect your device to PC, you need to download and install USB Driver first on your PC. when you connect your device to PC keep pressing Volume down key few more seconds after connecting.
-After that, Click on “Start” button from sp flash tool to Techno i3 Bypass FRP.