World First Tecno Spark 7 Pattern And Password Unlock | pr651 frp remove by cm2 .with boot file link

Franky38

Product Supporter
Jul 28, 2018
1,829
2,163
PayPal:

Donate money to this user
Good, here the boot file for techno spark 7 To use with the Infinity SPD module, you just have to copy and paste in the correct Infinity SPD installation directory and you can already perform any operation, FLEH, FRP, READ FIRMWARE, FRP, etc.

Without passwords, totally free
 

Attachments

  • Tecno Spark 7 boot file.rar
    389.2 KB · Views: 1,157

Hassan-Ali

Friend's Martview
Sep 18, 2019
224
130
PayPal:

Donate money to this user
Good, here the boot file for techno spark 7 To use with the Infinity SPD module, you just have to copy and paste in the correct Infinity SPD installation directory and you can already perform any operation, FLEH, FRP, READ FIRMWARE, FRP, etc.

Without passwords, totally free
Pr651 boot file password : 1122
 
  • Like
Reactions: Akmoney123

arslanmughal065

Active Member
Jul 22, 2019
21
10
Good, here the boot file for techno spark 7 To use with the Infinity SPD module, you just have to copy and paste in the correct Infinity SPD installation directory and you can already perform any operation, FLEH, FRP, READ FIRMWARE, FRP, etc.

Without passwords, totally free

Done With SP2

Code:
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : PR651H
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:30
 
  • Like
Reactions: Unlock24h

hassan zaheer

Junior Member
Apr 17, 2017
4
0
pakistan
solution pls

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : TECNO PR651H
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error : Access denied: {"Message":"Access denied `00717BE594` order"}
>>> ERROR : Server process failed!
>>> ERROR : FLASH FDL AUTHENTIFICATION FAILED!

>>> Error : Fail to boot FDL!
>>> Check previous message for more info!

Reconnect Power/Cable!

solution pls
 

Hassan-Ali

Friend's Martview
Sep 18, 2019
224
130
PayPal:

Donate money to this user
solution pls

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : TECNO PR651H
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error : Access denied: {"Message":"Access denied `00717BE594` order"}
>>> ERROR : Server process failed!
>>> ERROR : FLASH FDL AUTHENTIFICATION FAILED!

>>> Error : Fail to boot FDL!
>>> Check previous message for more info!

Reconnect Power/Cable!

solution pls
Contact internet and user or password
 

Hassan-Ali.

Junior Member
Apr 26, 2022
1
0
Rojhan
Good, here the boot file for techno spark 7 To use with the Infinity SPD module, you just have to copy and paste in the correct Infinity SPD installation directory and you can already perform any operation, FLEH, FRP, READ FIRMWARE, FRP, etc.

Without passwords, totally free
Thanks
 

jeam4real

Member
Jul 7, 2020
7
0
Nigeria
I need help please, after flashing firmware via CM2SP2 with format data selected PR651H. Phone reboots after every 2 minutes. How to fix please
 
Top