UMT UMT Box / PRO Modules Updates Here
- Thread starter SPYROS
- Start date
UMT Box
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset Huawei ID
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V2023 (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&1f73d83a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : CD24054701E0DEAF7C1897626D77E88D
SoC ID[0] : 3FC649542E00E8A44C16E73DD172701E
SoC ID[1] : 4B26E4B93B686BA6521102868789CEAF
Running Exploit... Installing Filter... OK Done
Downloading Preloader...OK
Saved as : preloader_k62v1_64_mex_a32.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A6842102137353861503E0136EB [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : BCCE88CBE7F9741BE2FF43C6D870FB6C
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : hB8aP>
CID : 90014A6841021373523861503E0136EB
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting Huawei ID...OK
Operation Finished.
[UltimateMTK2 v1.7]
Operation : Reset Huawei ID
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V2023 (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&1f73d83a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : CD24054701E0DEAF7C1897626D77E88D
SoC ID[0] : 3FC649542E00E8A44C16E73DD172701E
SoC ID[1] : 4B26E4B93B686BA6521102868789CEAF
Running Exploit... Installing Filter... OK Done
Downloading Preloader...OK
Saved as : preloader_k62v1_64_mex_a32.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A6842102137353861503E0136EB [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : BCCE88CBE7F9741BE2FF43C6D870FB6C
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : hB8aP>
CID : 90014A6841021373523861503E0136EB
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting Huawei ID...OK
Operation Finished.
[UltimateMTK2 v1.7]
Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : USB Serial Device (COM3)
Device Path : \\?\usb#vid_22d9&pid_0006#6&186afa3&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : Microsoft, 10.0.19041.3636 []
Mode : PRELOADER
Hw ID : MT6835 [1209] Dimensity 6100+
Details : 8A00,CA01,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 1E3DFCA45B5F387782E5E77EB902CF6F
SoC ID[0] : 54107C4789B0E0B8A0C8C965E1F0461A
SoC ID[1] : 298DC0A73B8E0E58C20AB99F0065995D
Sending 1st DA..OK
Jump DA Address...OK
V6 Protocol Detected!
Reading Hardware Information...OK
EXT_RAM Not Initialized!
Setup Hardware Init...OK
Reading Hardware Information...OK
VERSION : 1.2
RNDM_ID : ff084737d26cd559d71f775c89e9728d
PROD_ID : H6XGWKWOR4QGSGKR
RAM_SIZE : 0x200000000 [8.00 GB]
STORAGE : MT128GAXAU2U22 [UFS]
TYPE : UFS
BLOCK_SIZE : 0x1000
BOOT1 SIZE : 0x0000000000400000 [4.00 MB]
BOOT2 SIZE : 0x0000000000400000 [4.00 MB]
USER SIZE : 0x0000001DCB000000 [119.17 GB]
RPMB SIZE : 0x0000000000000000 [0 bytes]
Executing Exploit...Done
Sending DA2...Done
SLA : ENABLED
Life-Cycle : OK
RPMB Key : NOT-EXIST
Reading Partition Table...OK
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.7]
Log Saved : 20743279_170837.log
Operation : Erase Data + FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : USB Serial Device (COM3)
Device Path : \\?\usb#vid_22d9&pid_0006#6&186afa3&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : Microsoft, 10.0.19041.3636 []
Mode : PRELOADER
Hw ID : MT6835 [1209] Dimensity 6100+
Details : 8A00,CA01,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 1E3DFCA45B5F387782E5E77EB902CF6F
SoC ID[0] : 54107C4789B0E0B8A0C8C965E1F0461A
SoC ID[1] : 298DC0A73B8E0E58C20AB99F0065995D
Sending 1st DA..OK
Jump DA Address...OK
V6 Protocol Detected!
Reading Hardware Information...OK
EXT_RAM Not Initialized!
Setup Hardware Init...OK
Reading Hardware Information...OK
VERSION : 1.2
RNDM_ID : ff084737d26cd559d71f775c89e9728d
PROD_ID : H6XGWKWOR4QGSGKR
RAM_SIZE : 0x200000000 [8.00 GB]
STORAGE : MT128GAXAU2U22 [UFS]
TYPE : UFS
BLOCK_SIZE : 0x1000
BOOT1 SIZE : 0x0000000000400000 [4.00 MB]
BOOT2 SIZE : 0x0000000000400000 [4.00 MB]
USER SIZE : 0x0000001DCB000000 [119.17 GB]
RPMB SIZE : 0x0000000000000000 [0 bytes]
Executing Exploit...Done
Sending DA2...Done
SLA : ENABLED
Life-Cycle : OK
RPMB Key : NOT-EXIST
Reading Partition Table...OK
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.7]
Log Saved : 20743279_170837.log
TECNO INFINIX ITEL DISABLE LOCK BY ADB MEAN WE CAN SAVE USER DATA?UMTv2 / UMT Pro
Innovative and Intelligent
UltimateMTK2 v1.7
The Ultimate MediaTek Tool
What's New:
Added Infinix/Tecno/iTel Enable ADB in META mode
- You can use this function to Enable ADB.
- Once ADB is Enabled you can use functions in Infinix/Tecno/iTel Group.
Added Infinix/Tecno/iTel (ADB) Functions:
- Disable Locks (ADB)
- Enable Locks (ADB)
- Reset FRP (ADB)
- You can enable ADB using Enable ADB (Infinix) from META Functions.
Updated Erase Userdata
- Now it should not cause Checksum Error on phone startup.
Added Reset Locks (Vivo) in Format Functions
- You don't need to use Old Module to do that anymore
Some UI Changes
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
Download using Support Access or Mirrors
Official Website:
Ultimate Multi Tool
UMT Pro
Br,
UMT
Brand/Model : Infinix/Tecno/iTel (ADB)
Operation : Reset FRP (ADB)
Searching for Device..Found
Brand : Infinix
Model : Infinix X6831
Android Ver. : 13
Build : X6831-V7510AABCDEFJ-T-OP-240814V2771
Build Date : Wed Aug 14 17:57:26 CST 2024
Patch Level : 2024-08-05
Bootloader : unknown
Resetting FRP Lock...Done
Operation Finished.
[UltimateMTK2 v1.7]
Log Saved : 20252471_183124.log
Operation : Reset FRP (ADB)
Searching for Device..Found
Brand : Infinix
Model : Infinix X6831
Android Ver. : 13
Build : X6831-V7510AABCDEFJ-T-OP-240814V2771
Build Date : Wed Aug 14 17:57:26 CST 2024
Patch Level : 2024-08-05
Bootloader : unknown
Resetting FRP Lock...Done
Operation Finished.
[UltimateMTK2 v1.7]
Log Saved : 20252471_183124.log
Brand/Model : *Auto* / *Auto Detect*
Operation : IMEI Repair (Oppo Method)
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V2023 (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0203#6&1f73d83a&0&2#{86e0d1e0-8089-11d0-9ce4-08053e301f73}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : C96750B4858F3B3EF199227846F2AB2B
SoC ID[0] : BCA94D97F7C6CB7EF5914B2B4D75956D
SoC ID[1] : 3565C505EE4A98C8006A13A25975E4EC
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6765_19451.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A6842345E9A2753861503E035AC [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : C9DA8C570CA94EC1DCF7C016D701708E
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A684238615275303E035AC45E9A
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
Manuf. : OPPO
And. Ver. : 9
Locale : en-US
Patch : 2022-01-05
Bootloader : UNLOCKED
Reading nvdata..OK
Reading nvram..OK
Reading proinfo..OK
Reading protect1..OK
Reading protect2..OK
Backup saved as C:\Users\Dell\Desktop\128644.zip
IMEI1 : 356746023261782
IMEI2
Repairing Security...OK
Fixing Network Data...OK
Disabling Signature Check..OK
Operation Finished.
[UltimateMTK2 v1.7]
Operation : IMEI Repair (Oppo Method)
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V2023 (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0203#6&1f73d83a&0&2#{86e0d1e0-8089-11d0-9ce4-08053e301f73}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : C96750B4858F3B3EF199227846F2AB2B
SoC ID[0] : BCA94D97F7C6CB7EF5914B2B4D75956D
SoC ID[1] : 3565C505EE4A98C8006A13A25975E4EC
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6765_19451.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A6842345E9A2753861503E035AC [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : C9DA8C570CA94EC1DCF7C016D701708E
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A684238615275303E035AC45E9A
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
Manuf. : OPPO
And. Ver. : 9
Locale : en-US
Patch : 2022-01-05
Bootloader : UNLOCKED
Reading nvdata..OK
Reading nvram..OK
Reading proinfo..OK
Reading protect1..OK
Reading protect2..OK
Backup saved as C:\Users\Dell\Desktop\128644.zip
IMEI1 : 356746023261782
IMEI2
Repairing Security...OK
Fixing Network Data...OK
Disabling Signature Check..OK
Operation Finished.
[UltimateMTK2 v1.7]
on_network
Member
UMT TEAM, this update not working, i try this update on kj5 and smart 6 mtk, exe say done but adb not enable , Any solution pls?UMTv2 / UMT Pro
Innovative and Intelligent
UltimateMTK2 v1.7
The Ultimate MediaTek Tool
What's New:
Added Infinix/Tecno/iTel Enable ADB in META mode
- You can use this function to Enable ADB.
- Once ADB is Enabled you can use functions in Infinix/Tecno/iTel Group.
Added Infinix/Tecno/iTel (ADB) Functions:
- Disable Locks (ADB)
- Enable Locks (ADB)
- Reset FRP (ADB)
- You can enable ADB using Enable ADB (Infinix) from META Functions.
Updated Erase Userdata
- Now it should not cause Checksum Error on phone startup.
Added Reset Locks (Vivo) in Format Functions
- You don't need to use Old Module to do that anymore
Some UI Changes
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
Download using Support Access or Mirrors
Official Website:
Ultimate Multi Tool
UMT Pro
Br,
UMT
We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent
QcFire v11.4
The Ultimate Qualcomm Tool
Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices
What's New:
ASUS
- ROG Phone 7 (AI2205_C)
- ROG Phone 8 (AI2401)
- ROG Phone 9 (AI2501)
Honor
- 70 Lite (RBN-NX1)
- X8A 5G
Huawei
- MatePad 11.5 (BTK-AL09)
Lenovo
- Pad Pro 12.7 (TB371FC)
OnePlus
- 9 Pro (LE2121)
Oppo
- X2 Neo (CPH2009)
Samsung
- Galaxy A02s (SM-A025A) BIT 8
- Galaxy A05s (SM-A057M) BIT 7
- Galaxy A11 (SM-A115F) BIT 6
- Galaxy A23 (SM-A235F) BIT 8
- Galaxy A23 (SM-A235F) BIT 9
- Galaxy A23 5G (SM-A236B) BIT 9
- Galaxy A23 5G (SM-A236E) BIT 9
- Galaxy A42 5G (SM-A426B) BIT 8
- Galaxy A52 5G (SM-A526U) BIT G
- Galaxy A52s 5G (SM-A528B) BIT A
- Galaxy F23 5G (SM-E236B) BIT 8
- Galaxy M14 4G (SM-M145F) BIT 6
- Galaxy Note20 5G (SM-N981N) BIT 5
- Galaxy Note20 5G (SM-N981N) BIT 6
- Galaxy Note20 5G (SM-N981U) BIT 6
- Galaxy Note20 Ultra (SM-N986N) BIT 6
- Galaxy Note20 Ultra 5G (SM-N986N) BIT 5
- Galaxy Note20 Ultra 5G (SM-N986U) BIT A
- Galaxy S20 5G (SM-G981N) BIT 5
- Galaxy S20 5G (SM-G981N) BIT 6
- Galaxy S20 FE 5G (SM-G718B) BIT E
- Galaxy S21 FE 5G (SM-G990B) BIT B
- Galaxy S21 FE 5G (SM-G990U3) BIT A
- Galaxy S21+ 5G (SM-G996U) BIT 10
- Galaxy S22 Ultra 5G (SM-S908E) BIT B
- Galaxy S23 5G (SM-S911N) BIT 4
- Galaxy S23 Ultra 5G (SCG20) BIT 1
- Galaxy S23+ (SM-S916B) BIT-7
- Galaxy S8+ (SM-G955U) BIT 8
- Galaxy Tab A7 LTE (SM-T505) BIT 6
- Galaxy Tab A9+ (SM-X216B) BIT 5
- Galaxy Tab S6 Lite (SM-P613F) BIT 7
- Galaxy Tab S8 Ultra (SM-X900) BIT 9
- Galaxy Z Flip4 (SM-F721N) BIT 5
- Galaxy Z Fold3 5G (SM-F926B) BIT 2
- Galaxy Z Fold3 5G (SM-F926N) BIT 6
Sunmi
- P2 Pro
Xiaomi
- BlackShark 4 (PRS-A0)
- Poco F1 (berrylium)
Update Internal Loader Database
CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.
Special thanks to all our users who helped us with their test reports.
Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.
It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...
SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 9 YEARS
WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.
How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors
PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED
Telegram
Br,
UMT
UMTv2 / UMT Pro
Innovative and Intelligent
QcFire v11.4
The Ultimate Qualcomm Tool
Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices
What's New:
ASUS
- ROG Phone 7 (AI2205_C)
- ROG Phone 8 (AI2401)
- ROG Phone 9 (AI2501)
Honor
- 70 Lite (RBN-NX1)
- X8A 5G
Huawei
- MatePad 11.5 (BTK-AL09)
Lenovo
- Pad Pro 12.7 (TB371FC)
OnePlus
- 9 Pro (LE2121)
Oppo
- X2 Neo (CPH2009)
Samsung
- Galaxy A02s (SM-A025A) BIT 8
- Galaxy A05s (SM-A057M) BIT 7
- Galaxy A11 (SM-A115F) BIT 6
- Galaxy A23 (SM-A235F) BIT 8
- Galaxy A23 (SM-A235F) BIT 9
- Galaxy A23 5G (SM-A236B) BIT 9
- Galaxy A23 5G (SM-A236E) BIT 9
- Galaxy A42 5G (SM-A426B) BIT 8
- Galaxy A52 5G (SM-A526U) BIT G
- Galaxy A52s 5G (SM-A528B) BIT A
- Galaxy F23 5G (SM-E236B) BIT 8
- Galaxy M14 4G (SM-M145F) BIT 6
- Galaxy Note20 5G (SM-N981N) BIT 5
- Galaxy Note20 5G (SM-N981N) BIT 6
- Galaxy Note20 5G (SM-N981U) BIT 6
- Galaxy Note20 Ultra (SM-N986N) BIT 6
- Galaxy Note20 Ultra 5G (SM-N986N) BIT 5
- Galaxy Note20 Ultra 5G (SM-N986U) BIT A
- Galaxy S20 5G (SM-G981N) BIT 5
- Galaxy S20 5G (SM-G981N) BIT 6
- Galaxy S20 FE 5G (SM-G718B) BIT E
- Galaxy S21 FE 5G (SM-G990B) BIT B
- Galaxy S21 FE 5G (SM-G990U3) BIT A
- Galaxy S21+ 5G (SM-G996U) BIT 10
- Galaxy S22 Ultra 5G (SM-S908E) BIT B
- Galaxy S23 5G (SM-S911N) BIT 4
- Galaxy S23 Ultra 5G (SCG20) BIT 1
- Galaxy S23+ (SM-S916B) BIT-7
- Galaxy S8+ (SM-G955U) BIT 8
- Galaxy Tab A7 LTE (SM-T505) BIT 6
- Galaxy Tab A9+ (SM-X216B) BIT 5
- Galaxy Tab S6 Lite (SM-P613F) BIT 7
- Galaxy Tab S8 Ultra (SM-X900) BIT 9
- Galaxy Z Flip4 (SM-F721N) BIT 5
- Galaxy Z Fold3 5G (SM-F926B) BIT 2
- Galaxy Z Fold3 5G (SM-F926N) BIT 6
Sunmi
- P2 Pro
Xiaomi
- BlackShark 4 (PRS-A0)
- Poco F1 (berrylium)
Update Internal Loader Database
CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.
Special thanks to all our users who helped us with their test reports.
Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.
It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...
SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 9 YEARS
WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.
How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors
PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED
Telegram
Br,
UMT
sanjay mobile
Member
plss check loader for ..redmi note 6 pro...note 7 ..note 7s...note 7 pro....emmc detecting failed for frp and flash ..have to use external loader from flash file ...We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent
QcFire v11.4
The Ultimate Qualcomm Tool
Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices
What's New:
ASUS
- ROG Phone 7 (AI2205_C)
- ROG Phone 8 (AI2401)
- ROG Phone 9 (AI2501)
Honor
- 70 Lite (RBN-NX1)
- X8A 5G
Huawei
- MatePad 11.5 (BTK-AL09)
Lenovo
- Pad Pro 12.7 (TB371FC)
OnePlus
- 9 Pro (LE2121)
Oppo
- X2 Neo (CPH2009)
Samsung
- Galaxy A02s (SM-A025A) BIT 8
- Galaxy A05s (SM-A057M) BIT 7
- Galaxy A11 (SM-A115F) BIT 6
- Galaxy A23 (SM-A235F) BIT 8
- Galaxy A23 (SM-A235F) BIT 9
- Galaxy A23 5G (SM-A236B) BIT 9
- Galaxy A23 5G (SM-A236E) BIT 9
- Galaxy A42 5G (SM-A426B) BIT 8
- Galaxy A52 5G (SM-A526U) BIT G
- Galaxy A52s 5G (SM-A528B) BIT A
- Galaxy F23 5G (SM-E236B) BIT 8
- Galaxy M14 4G (SM-M145F) BIT 6
- Galaxy Note20 5G (SM-N981N) BIT 5
- Galaxy Note20 5G (SM-N981N) BIT 6
- Galaxy Note20 5G (SM-N981U) BIT 6
- Galaxy Note20 Ultra (SM-N986N) BIT 6
- Galaxy Note20 Ultra 5G (SM-N986N) BIT 5
- Galaxy Note20 Ultra 5G (SM-N986U) BIT A
- Galaxy S20 5G (SM-G981N) BIT 5
- Galaxy S20 5G (SM-G981N) BIT 6
- Galaxy S20 FE 5G (SM-G718B) BIT E
- Galaxy S21 FE 5G (SM-G990B) BIT B
- Galaxy S21 FE 5G (SM-G990U3) BIT A
- Galaxy S21+ 5G (SM-G996U) BIT 10
- Galaxy S22 Ultra 5G (SM-S908E) BIT B
- Galaxy S23 5G (SM-S911N) BIT 4
- Galaxy S23 Ultra 5G (SCG20) BIT 1
- Galaxy S23+ (SM-S916B) BIT-7
- Galaxy S8+ (SM-G955U) BIT 8
- Galaxy Tab A7 LTE (SM-T505) BIT 6
- Galaxy Tab A9+ (SM-X216B) BIT 5
- Galaxy Tab S6 Lite (SM-P613F) BIT 7
- Galaxy Tab S8 Ultra (SM-X900) BIT 9
- Galaxy Z Flip4 (SM-F721N) BIT 5
- Galaxy Z Fold3 5G (SM-F926B) BIT 2
- Galaxy Z Fold3 5G (SM-F926N) BIT 6
Sunmi
- P2 Pro
Xiaomi
- BlackShark 4 (PRS-A0)
- Poco F1 (berrylium)
Update Internal Loader Database
CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.
Special thanks to all our users who helped us with their test reports.
Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.
It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...
SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 9 YEARS
WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.
How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors
PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED
Telegram
Br,
UMT
USING PL_EXLOIT [MOTO XT2333]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&df2ee03&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 1.0.0.0 [USBSER.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 53D0AF990A7432DE1E9D914F5E16EF4C
SoC ID[0] : EE7640BB53EFC2E21B9B6869BC658DCB
SoC ID[1] : 1B8D22701525643F764E5CF4D152674A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : 1D470245E7F885DA2083D3AC6CF781ED
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DV6DBB
CID : 15010044563644424202D114FE951A47
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1EC00000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.7]
Log Saved : 20546633_146742.log
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&df2ee03&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 1.0.0.0 [USBSER.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 53D0AF990A7432DE1E9D914F5E16EF4C
SoC ID[0] : EE7640BB53EFC2E21B9B6869BC658DCB
SoC ID[1] : 1B8D22701525643F764E5CF4D152674A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : 1D470245E7F885DA2083D3AC6CF781ED
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DV6DBB
CID : 15010044563644424202D114FE951A47
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1EC00000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.7]
Log Saved : 20546633_146742.log
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1500A00 [SD855] 85495100
OPK_DATA : 7A44FD44C35394DC10E1E0BEF04 0FECF30032DA08B910D525491DA862D0E420F
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SD855]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SD855, UFS, 256 GB
LU Count : 6 [0x03A90800] [0x00000800] [0x00000800] [0x00002000] [0x00100000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [121]
Reading Device Information...OK
Software : , 1675091836552 [Mon Jan 30 23:17:16 CST 2023]
Android Ver. : 12
Patch Level : 2022-12-05
Using Patch Method...
Using Patch Method... Done Done
Operation Finished.
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Rebooting Device...Done
Checking for existing devices...Not Found
QcFire Ver. 11.4
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1500A00 [SD855] 85495100
OPK_DATA : 7A44FD44C35394DC10E1E0BEF04 0FECF30032DA08B910D525491DA862D0E420F
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SD855]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SD855, UFS, 256 GB
LU Count : 6 [0x03A90800] [0x00000800] [0x00000800] [0x00002000] [0x00100000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [121]
Reading Device Information...OK
Software : , 1675091836552 [Mon Jan 30 23:17:16 CST 2023]
Android Ver. : 12
Patch Level : 2022-12-05
Using Patch Method...
Using Patch Method... Done Done
Operation Finished.
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Rebooting Device...Done
Checking for existing devices...Not Found
QcFire Ver. 11.4
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BR7233886E38F21M8FBDE6433FCE 1D25A7B0472DDN
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 64 GB
LU Count : 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [86]
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20221205011709, V13.0.2.0.SHQMIXC [Mon Dec 5 01:23:38 CST 2022]
Android Ver. : 12
Patch Level : 2022-12-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Display ID : 4RU2-G3CO-TIEA-DA4
Writing Data...Done
Operation Finished.
QcFire Ver. 11.4
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BR7233886E38F21M8FBDE6433FCE 1D25A7B0472DDN
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 64 GB
LU Count : 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [86]
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20221205011709, V13.0.2.0.SHQMIXC [Mon Dec 5 01:23:38 CST 2022]
Android Ver. : 12
Patch Level : 2022-12-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Display ID : 4RU2-G3CO-TIEA-DA4
Writing Data...Done
Operation Finished.
QcFire Ver. 11.4
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&16a0d3be&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 846EAC2190D88622184A99CC4BE471DA
SoC ID[0] : 002828AE5A6A7F77ECD5A211634E8B9D
SoC ID[1] : D6657ADD475DCD34FAF2FCD68736B94B
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_merlin.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E47314A5AA928A139533910105F [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : B9D9E355D902FF2C9FF87263B05413AD
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : G1J9S9
CID : 13014E47314A39533910105F5AA928A1
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1F000000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 10
Build Dt. : Sat Dec 12 00:08:42 CST 2020
Display ID : AL2522-Merlin-V101-Q-1212
Ver. Inc. : V12.0.5.0.QJOEUXM
Locale : en-GB
Mod. Dev. : merlin_eea_global
Patch : 2020-12-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.7]
Log Saved : 20254860_105584.log
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&16a0d3be&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 846EAC2190D88622184A99CC4BE471DA
SoC ID[0] : 002828AE5A6A7F77ECD5A211634E8B9D
SoC ID[1] : D6657ADD475DCD34FAF2FCD68736B94B
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_merlin.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E47314A5AA928A139533910105F [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : B9D9E355D902FF2C9FF87263B05413AD
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : G1J9S9
CID : 13014E47314A39533910105F5AA928A1
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1F000000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 10
Build Dt. : Sat Dec 12 00:08:42 CST 2020
Display ID : AL2522-Merlin-V101-Q-1212
Ver. Inc. : V12.0.5.0.QJOEUXM
Locale : en-GB
Mod. Dev. : merlin_eea_global
Patch : 2020-12-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.7]
Log Saved : 20254860_105584.log
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00005100
OPK_DATA : 85B4DE13B0686A74AFF0860CCC809E812F4AC9931748 CFA7E56DD608534C5A6B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_003]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, EMMC, 256 GB
LU Count : 4 [0x1D1F0000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK [0]
Resetting FRP Lock...Failed
Using Patch Method...
Operation Failed.
QcFire Ver. 11.4
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00005100
OPK_DATA : 85B4DE13B0686A74AFF0860CCC809E812F4AC9931748 CFA7E56DD608534C5A6B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_003]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, EMMC, 256 GB
LU Count : 4 [0x1D1F0000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK [0]
Resetting FRP Lock...Failed
Using Patch Method...
Operation Failed.
QcFire Ver. 11.4
Device : Samsung Galaxy A52s 5G (SM-A528B) BIT A
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1201900 [SM7325] 00002000
OPK_DATA : 1A9F05BA6F39A9DF2A6B2377A580DE CA78F44B211CBA89A262DA2523DC5AC3DB
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A528B_BITA.ufl]
Preparing Loader...Done
Sending Loader [SM-A528B_BITA]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM7325, UFS, 128 GB
LU Count : 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [77]
Reading Device Information...OK
Software : UP1A.231005.007.A528BXXSAGXK1, A528BXXSAGXK1 [Wed Nov 6 10:29:02 KST 2024]
Android Ver. : 14
Patch Level : 2024-11-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 11.4
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1201900 [SM7325] 00002000
OPK_DATA : 1A9F05BA6F39A9DF2A6B2377A580DE CA78F44B211CBA89A262DA2523DC5AC3DB
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A528B_BITA.ufl]
Preparing Loader...Done
Sending Loader [SM-A528B_BITA]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM7325, UFS, 128 GB
LU Count : 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [77]
Reading Device Information...OK
Software : UP1A.231005.007.A528BXXSAGXK1, A528BXXSAGXK1 [Wed Nov 6 10:29:02 KST 2024]
Android Ver. : 14
Patch Level : 2024-11-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 11.4
UMTv2 / UMT Pro
Innovative and Intelligent
UltimateMTK2 v1.8.1
The Ultimate MediaTek Tool
What's New:
Updated Infinix/Tecno Enable ADB (META)
- Added SLA Auth Support
- Fixed ADB Not Enabled on some firwmare versions
Tested Devices:
- Infinix Hot 11 (X689F)
- Tecno Spark 20 Pro 5G (KJ8)
- All devices should be supported now
Updated Infinix V4 PL Exploit
- MT6835
- MT6855
- MT6895
- MT6983
Supported Models:
- Infinix Note 40 5G (X6852)
- Infinix Note 40 Pro 5G (X6851)
- Tecno Phantom X2 Pro 5G (AD9)
- Tecno Spark 30 5G (KL8)
- and others based on above Chipsets
Added Samsung MT6768 PL Exploit
- Samsung A05 (SM-A055F)
Some other minor improvements
Added Read Anti-Crack Info
- Helpful to know information about device and possibly reason of Anti-Crack Message
Fixed Slow Startup and Hanging Issue
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
Download using Support Access or Mirrors
Official Website:
Ultimate Multi Tool
UMT Pro
Br,
UMT
Innovative and Intelligent
UltimateMTK2 v1.8.1
The Ultimate MediaTek Tool
What's New:
Updated Infinix/Tecno Enable ADB (META)
- Added SLA Auth Support
- Fixed ADB Not Enabled on some firwmare versions
Tested Devices:
- Infinix Hot 11 (X689F)
- Tecno Spark 20 Pro 5G (KJ8)
- All devices should be supported now
Updated Infinix V4 PL Exploit
- MT6835
- MT6855
- MT6895
- MT6983
Supported Models:
- Infinix Note 40 5G (X6852)
- Infinix Note 40 Pro 5G (X6851)
- Tecno Phantom X2 Pro 5G (AD9)
- Tecno Spark 30 5G (KL8)
- and others based on above Chipsets
Added Samsung MT6768 PL Exploit
- Samsung A05 (SM-A055F)
Some other minor improvements
Added Read Anti-Crack Info
- Helpful to know information about device and possibly reason of Anti-Crack Message
Fixed Slow Startup and Hanging Issue
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
Download using Support Access or Mirrors
Official Website:
Ultimate Multi Tool
UMT Pro
Br,
UMT
Last edited:
jaanjaan
Friend's Martview
good update but my quistion is why som phone after reset pl mode bootloadre unlock and restart first logo and dm verity error or orange state error can u solve this updateUMTv2 / UMT Pro
Innovative and Intelligent
UltimateMTK2 v1.8
The Ultimate MediaTek Tool
What's New:
Updated Infinix/Tecno Enable ADB (META)
- Added SLA Auth Support
- Fixed ADB Not Enabled on some firwmare versions
Tested Devices:
- Infinix Hot 11 (X689F)
- Tecno Spark 20 Pro 5G (KJ8)
- All devices should be supported now
Updated Infinix V4 PL Exploit
- MT6835
- MT6855
- MT6895
- MT6983
Supported Models:
- Infinix Note 40 5G (X6852)
- Infinix Note 40 Pro 5G (X6851)
- Tecno Phantom X2 Pro 5G (AD9)
- Tecno Spark 30 5G (KL8)
- and others based on above Chipsets
Added Samsung MT6768 PL Exploit
- Samsung A05 (SM-A055F)
Some other minor improvements
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
Download using Support Access or Mirrors
Official Website:
Ultimate Multi Tool
UMT Pro
Br,
UMT
best regard.
dany_boy
Friend's Martview
Good update. But all users waiting for Vivo mtk update please confirm that Vivo update coming soon or laterUMTv2 / UMT Pro
Innovative and Intelligent
UltimateMTK2 v1.8
The Ultimate MediaTek Tool
What's New:
Updated Infinix/Tecno Enable ADB (META)
- Added SLA Auth Support
- Fixed ADB Not Enabled on some firwmare versions
Tested Devices:
- Infinix Hot 11 (X689F)
- Tecno Spark 20 Pro 5G (KJ8)
- All devices should be supported now
Updated Infinix V4 PL Exploit
- MT6835
- MT6855
- MT6895
- MT6983
Supported Models:
- Infinix Note 40 5G (X6852)
- Infinix Note 40 Pro 5G (X6851)
- Tecno Phantom X2 Pro 5G (AD9)
- Tecno Spark 30 5G (KL8)
- and others based on above Chipsets
Added Samsung MT6768 PL Exploit
- Samsung A05 (SM-A055F)
Some other minor improvements
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
Download using Support Access or Mirrors
Official Website:
Ultimate Multi Tool
UMT Pro
Br,
UMT
starservice
Member
after update new version lagging issues if operated any command including startup the apps perhaps on;y in me but after update have lag problemUMTv2 / UMT Pro
Innovative and Intelligent
UltimateMTK2 v1.8
The Ultimate MediaTek Tool
What's New:
Updated Infinix/Tecno Enable ADB (META)
- Added SLA Auth Support
- Fixed ADB Not Enabled on some firwmare versions
Tested Devices:
- Infinix Hot 11 (X689F)
- Tecno Spark 20 Pro 5G (KJ8)
- All devices should be supported now
Updated Infinix V4 PL Exploit
- MT6835
- MT6855
- MT6895
- MT6983
Supported Models:
- Infinix Note 40 5G (X6852)
- Infinix Note 40 Pro 5G (X6851)
- Tecno Phantom X2 Pro 5G (AD9)
- Tecno Spark 30 5G (KL8)
- and others based on above Chipsets
Added Samsung MT6768 PL Exploit
- Samsung A05 (SM-A055F)
Some other minor improvements
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
Download using Support Access or Mirrors
Official Website:
Ultimate Multi Tool
UMT Pro
Br,
UMT