Unbrick Huawei Y625-U32 Dead Boot 9008 Port Only Recovery
Y625-U32 Unbrick & Flashing Guide-------------------------------------------------------------
#1 Enable QDloader Mode
----------------------------------------------
1. Disassemble the phone,
2. Short these two poins,
3. Connect phone to PC (without battery),
4. Check Device Manager > Ports,
5. Now your phone in Qualcomm Download Mode,
Let's move to the next part.
#2 Flashing the phone
-------------------------------------------
1. Download required files from Download Section,
2. Run Huyie Download tool as Administrator,
3. Follow these images,
4. Disconnect the phone and Power it on,
You're done
Download Section
----------------------------------------------
Huawei Y625-U32 Firmware
Download Y625-U32_Unbrick-Firmware.rar | Marhaba Firmware
Download Y625-U32_IMEI_0_Repair_Marhaba.7z | Marhaba Firmware
< The tool is included with the firmware >
This is not an SD_Upgrade package,
This is the factory firmware which is used to flash the phone in Qualcomm Download Mode.
Final Word
--------------------------
This method not only works with Y625-U32, it should work for all Huawei Qualcomm based phones,
but you'll need to find the Testpoint and the Factory firmware.
