Solved Unbrick LG G4 Brick hs-usb Qdloader 9008 Without Box
- Thread starter Malik Sajid
- Start date
This topic has been solved
Bilal Khan
Friend's Martview
Sir plz tell me i have lg g2 d802 after after flash cant enter to d/l mode plz how to do it?Unbrick LG G4 Brick hs-usb Qdloader 9008Model Supported
Credit Goes To
Alnajat Soft Team
Engineer
Mohammed Alshikh
H815
H818
H818N
H818P
H819
LS995
LS991
Files Link
1. Download
QPST.WIN.2.7-00430-GENERAL
Run setup.exe
Windows [Start] button >> Allprograms >> QPST >> QFIL
installation confirmation
2. Download
Qdload9008_HSUSB_Driver
Install Drivers
3. D / L via QFIL
To force QDloader download mode, connect the FORCED_USB emmc section with a jumper.
Or pressing key combination (volup + voldown) and poweron to boot Emergency D / L mode
After two points in the red circle are shorted and connected by power or USB connection, Qdloadmode can be entered and connected to QFIL
In Emergency D / L mode, check the port in Device Manager after connecting USB -> QS
Windows [Start] button >> All programs >> QPST >> Run QFIL
Select Port
1. Click the "Select Port" button
If you deselect Show Non Diagnostic Port, only the "Diagnostic" or "QDLoader" port will be visible
Selecting the port identified by Device Manager
MBN file selection
2. Click the "Browse" button
Select the file "prog_emmc_firehose_8992_lite_stable.mbn" in the folder where the images are stored.
For fusing samples, use images made for fusing.
ForFusingDevice: For Fusing Devices -> Download to LAF after recovery
NotForFusingDevice: for non-fused devices -> Restore and download
Select Build, RawProgram, Patch Check
Check RawProgram and Patch settings
Check the rawprogram0.xmlpatch0.xml file included
in the -Select Build path.
firehoseprogrammer MBN selected in the same folder
Rawprogram0.xml, patch0.xml are loaded.
SWDownload
4. Click the "Download" button
- The progress bar below is completed and the Download Succeed -> Finish Download message is confirmed.
Gsm Marhaba Team
Sent From SM-G925F Using GsmMarhaba App
Bilal Khan
Friend's Martview
i have unbricked h815 with ls991 recovery now i can acess download mode. I have flashed 4,5 kdz but its showing error in lgup
something like tot rollback version is smaller then device
something like tot rollback version is smaller then device
mustafa_thora
Active Member
abdul basit
Member
H810 suported?Unbrick LG G4 Brick hs-usb Qdloader 9008Model Supported
Credit Goes To
Alnajat Soft Team
Engineer
Mohammed Alshikh
H815
H818
H818N
H818P
H819
LS995
LS991
Files Link
1. Download
QPST.WIN.2.7-00430-GENERAL
Run setup.exe
Windows [Start] button >> Allprograms >> QPST >> QFIL
installation confirmation
2. Download
Qdload9008_HSUSB_Driver
Install Drivers
3. D / L via QFIL
To force QDloader download mode, connect the FORCED_USB emmc section with a jumper.
Or pressing key combination (volup + voldown) and poweron to boot Emergency D / L mode
After two points in the red circle are shorted and connected by power or USB connection, Qdloadmode can be entered and connected to QFIL
In Emergency D / L mode, check the port in Device Manager after connecting USB -> QS
Windows [Start] button >> All programs >> QPST >> Run QFIL
Select Port
1. Click the "Select Port" button
If you deselect Show Non Diagnostic Port, only the "Diagnostic" or "QDLoader" port will be visible
Selecting the port identified by Device Manager
MBN file selection
2. Click the "Browse" button
Select the file "prog_emmc_firehose_8992_lite_stable.mbn" in the folder where the images are stored.
For fusing samples, use images made for fusing.
ForFusingDevice: For Fusing Devices -> Download to LAF after recovery
NotForFusingDevice: for non-fused devices -> Restore and download
Select Build, RawProgram, Patch Check
Check RawProgram and Patch settings
Check the rawprogram0.xmlpatch0.xml file included
in the -Select Build path.
firehoseprogrammer MBN selected in the same folder
Rawprogram0.xml, patch0.xml are loaded.
SWDownload
4. Click the "Download" button
- The progress bar below is completed and the Download Succeed -> Finish Download message is confirmed.
Gsm Marhaba Team
link not work any other link,,,,,,,,,,,,,,,,,Unbrick LG G4 Brick hs-usb Qdloader 9008Model Supported
Credit Goes To
Alnajat Soft Team
Engineer
Mohammed Alshikh
H815
H818
H818N
H818P
H819
LS995
LS991
Files Link
1. Download
QPST.WIN.2.7-00430-GENERAL
Run setup.exe
Windows [Start] button >> Allprograms >> QPST >> QFIL
installation confirmation
2. Download
Qdload9008_HSUSB_Driver
Install Drivers
3. D / L via QFIL
To force QDloader download mode, connect the FORCED_USB emmc section with a jumper.
Or pressing key combination (volup + voldown) and poweron to boot Emergency D / L mode
After two points in the red circle are shorted and connected by power or USB connection, Qdloadmode can be entered and connected to QFIL
In Emergency D / L mode, check the port in Device Manager after connecting USB -> QS
Windows [Start] button >> All programs >> QPST >> Run QFIL
Select Port
1. Click the "Select Port" button
If you deselect Show Non Diagnostic Port, only the "Diagnostic" or "QDLoader" port will be visible
Selecting the port identified by Device Manager
MBN file selection
2. Click the "Browse" button
Select the file "prog_emmc_firehose_8992_lite_stable.mbn" in the folder where the images are stored.
For fusing samples, use images made for fusing.
ForFusingDevice: For Fusing Devices -> Download to LAF after recovery
NotForFusingDevice: for non-fused devices -> Restore and download
Select Build, RawProgram, Patch Check
Check RawProgram and Patch settings
Check the rawprogram0.xmlpatch0.xml file included
in the -Select Build path.
firehoseprogrammer MBN selected in the same folder
Rawprogram0.xml, patch0.xml are loaded.
SWDownload
4. Click the "Download" button
- The progress bar below is completed and the Download Succeed -> Finish Download message is confirmed.
Gsm Marhaba Team
