what type of updates are these. vivo y91i 2021 10 01 nor brom mode or prealoader mode working.
Selected model: Vivo PD1818GF (Vivo Y91I)
Operation: Flash (Format all + download)
Software version: 4.10
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES
Work ID: 1566343
Parse scatter file... OK
Load Rom Images... OK
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM13 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x753CF084, 0xA9D8AD55, 0x02F91367, 0x5DB64649
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... error(DA_INIT_KEY_FAIL)
Advanced Authorization (Preloader) not supported for this preloader version.
Selected model: Vivo PD1818GF (Vivo Y91I)
Operation: Read Flash Info
Software version: 4.10
Work ID: 1566538
Parse scatter file... OK
Load Rom Images... OK
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM13 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x753CF084, 0xA9D8AD55, 0x02F91367, 0x5DB64649
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... error(DA_INIT_KEY_FAIL)
Advanced Authorization (Preloader) not supported for this preloader version.
Selected model: Vivo PD1818GF (Vivo Y91I)
Operation: Flash (Format all + download)
Software version: 4.10
Work ID: 1566601
Parse scatter file... OK
Load Rom Images... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM13 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device...
Selected model: Vivo PD1818GF (Vivo Y91I)
Operation: Flash (Format all + download)
Software version: 4.10
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES
Work ID: 1566343
Parse scatter file... OK
Load Rom Images... OK
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM13 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x753CF084, 0xA9D8AD55, 0x02F91367, 0x5DB64649
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... error(DA_INIT_KEY_FAIL)
Advanced Authorization (Preloader) not supported for this preloader version.
Selected model: Vivo PD1818GF (Vivo Y91I)
Operation: Read Flash Info
Software version: 4.10
Work ID: 1566538
Parse scatter file... OK
Load Rom Images... OK
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM13 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x753CF084, 0xA9D8AD55, 0x02F91367, 0x5DB64649
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... error(DA_INIT_KEY_FAIL)
Advanced Authorization (Preloader) not supported for this preloader version.
Selected model: Vivo PD1818GF (Vivo Y91I)
Operation: Flash (Format all + download)
Software version: 4.10
Work ID: 1566601
Parse scatter file... OK
Load Rom Images... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM13 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device...