Start Connect v3.16
Config: Vivo/2024-11-v5 Boot [DA] Factory v7
Port: BROM + PL; BROM force: Off
DA Key: custom; LSLA: Off; H8T: On; Auto-EMI: On
Power device Off and connect cable now
BROM: Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER #5 ] MediaTek PreLoader USB VCOM_V2023 (Android) (COM5) 0E8D:2000
Waiting for boot Ack...
Handshake... Ok
MT6765 HWs: 8A00 HWv: CA00 HWc: 0766 SWv: 0000 Evo: 0000 Helio Cervino|P35|G35|G36|G37|G50|MT8768t [v5]; FireFly [FF] support: Yes
Sec: 0x0005 SBC+SDA; BROM/BL ver FF/03 [PRELOADER]
MEID: 8996DA211E66A17AC064D5AF182039E0
SOCID: 7967A02170F65F8B0CC61CA38B4C5440AEC07360FFCC736512F73B11DF0E30BC
[d316571a] Vivo\2024-11-v5\MTK_AllInOne_DA.2024-11.a6947361.bin
MT6765
Get bootcode... Ok
DA vendor: bbk
DA Key: custom 1-|2~
Send DA1... Ok
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set Checksum [none]... Ok
DA set params... EXT RAM Ok: PRELOADER
Boot DA2/1...
Boot DA2/2... Ok
DA sync... Ok
DA Auth no need
Get hardware info...
SRAM: 0x0003A000 232.00 Kb
DRAM: 0x80000000 2.00 Gb
EMMC CID: 150100424A54443452090B0AC086A9A7 crc Ok
Vendor: Samsung OEM: 0x0100 ID: 424A54443452 [BJTD4R] PRV: 0x09 Serial: 185254022 0x0B0AC086
MM/YY: 10/2022
BOOT1/2: 0x00400000 4.00 Mb | 00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x747C00000 29.12 Gb
MT6765 HWs: 8A00 HWv: CA00 HWc: 0766 SWv: 0000 Evo: 0000 Helio Cervino|P35|G35|G36|G37|G50|MT8768t [v5]; FireFly [FF] support: Yes
MEID: 8996DA211E66A17AC064D5AF182039E0
SOCID: 7967A02170F65F8B0CC61CA38B4C5440AEC07360FFCC736512F73B11DF0E30BC
HRID: 85CB9D49485CBCC2BEEEAEC74DEE4DA7
RNID: 409141E07CEBED8B945553A83E02BA45 sync2 delayed
USB: HIGH-SPEED
DA Key: custom 1-|2-; Allow errors: No
Boot Ok 1 sec
SoC drivers: MediaTek PreLoader USB VCOM_V2023 (Android) v3.0.1512.0
[DA3] run warn(50) Additional functions may be limited
You may try with another DA f.e. base/2316 or select Boot [FF] or connect in BROM
If process freez, f.e. PMT read fail, set [DA3] to Off
Get 1st partition table... type 0x64 Ok 218 us GPT Ok
mbr protective;raw.len=8000
PGPT 53 entries
Device has no slots
Probe boot... recovery_vendor ramsidk.len=0; recovery_ramdisk ramsidk.len=0; vendor_boot ramsidk.len=0; recovery v2 gzip ramdisk.size=57.64 Mb; got 2 files; boot v2 gzip ramdisk.size=2.12 Mb; got 1 files; Ok 156 us
Probe vbmeta... Ok(4) 219 us
Product Brand: vivo
Product Device: V2236
Product Model: V2236
Product Name: V2236
SW: vivo/V2236/V2236:12/SP1A.210812.003/compiler11271556:user/release-keys
Patch Level: SP1A.210812.003
Display ID: PD2236DF_EX_A_12.0.25.4.W30.V000L1
SW Version: compiler11271556
Ver. CodeName: REL
Sec. Patch: 2025-05-01
Build Time: 27-11-2025 08:06:18 AM
Product Info: k65v1_32_bsp_2g_ago
SW: full_k65v1_32_bsp_2g_ago-user 12 SP1A.210812.003 compiler11271556 release-keys
Vivo OS: Funtouch OS 12 Global
Vivo Product: V2236
Vivo HW: PD2236DF_EXMA
Product Manfct: vivo
Build: vivo/V2236/V2236:12/SP1A.210812.003/compiler11271556:user/release-keys
Product Board: k65v1_32_bsp_2g_ago
Board Platform: mt6765
ID: vivo-v2236-k65v1-32-bsp-2g-ago
Strategy [vivo]
Firmware ID: MT6765_vivo_V2236_OSv12_PD2236DF_EX_A_12.0.25.4.W30.V000L1_SP1A.210812.003_k65v1_32_bsp_2g_ago
Android ver: 12
userdata: [f2fs] FBE [file based encryption] cache: [ext4]
Load userdata... Ok
userdata: 22.42 Gb [FS raw] encrypted
Set [Deep info] On to get modem, bootloader, frp and other info
Set [HW health] On to get hardware health state
Set [RPMB state] On to get RPMB state
Stop Connect v3.16 55 sec
Start FRP Try to keep Userdata v3.16
ID: vivo-v2236-k65v1-32-bsp-2g-ago
Strategy [vivo]
Firmware ID: MT6765_vivo_V2236_OSv12_PD2236DF_EX_A_12.0.25.4.W30.V000L1_SP1A.210812.003_k65v1_32_bsp_2g_ago
Android ver: 12
userdata: [f2fs] FBE [file based encryption] cache: [ext4]
Reset FRP... frp config found
wipe frp... Ok 1 sec Done(1)
Reset for vivo...
wipe backup... Ok 7 sec Done(1)
Stop FRP Try to keep Userdata v3.16 10 sec
If FRP still active make FRP with Userdata wipe
Start Reboot v3.16
reboot...
Stop Reboot v3.16 141 us Bye
Config: Vivo/2024-11-v5 Boot [DA] Factory v7
Port: BROM + PL; BROM force: Off
DA Key: custom; LSLA: Off; H8T: On; Auto-EMI: On
Power device Off and connect cable now
BROM: Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER #5 ] MediaTek PreLoader USB VCOM_V2023 (Android) (COM5) 0E8D:2000
Waiting for boot Ack...
Handshake... Ok
MT6765 HWs: 8A00 HWv: CA00 HWc: 0766 SWv: 0000 Evo: 0000 Helio Cervino|P35|G35|G36|G37|G50|MT8768t [v5]; FireFly [FF] support: Yes
Sec: 0x0005 SBC+SDA; BROM/BL ver FF/03 [PRELOADER]
MEID: 8996DA211E66A17AC064D5AF182039E0
SOCID: 7967A02170F65F8B0CC61CA38B4C5440AEC07360FFCC736512F73B11DF0E30BC
[d316571a] Vivo\2024-11-v5\MTK_AllInOne_DA.2024-11.a6947361.bin
MT6765
Get bootcode... Ok
DA vendor: bbk
DA Key: custom 1-|2~
Send DA1... Ok
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set Checksum [none]... Ok
DA set params... EXT RAM Ok: PRELOADER
Boot DA2/1...
Boot DA2/2... Ok
DA sync... Ok
DA Auth no need
Get hardware info...
SRAM: 0x0003A000 232.00 Kb
DRAM: 0x80000000 2.00 Gb
EMMC CID: 150100424A54443452090B0AC086A9A7 crc Ok
Vendor: Samsung OEM: 0x0100 ID: 424A54443452 [BJTD4R] PRV: 0x09 Serial: 185254022 0x0B0AC086
MM/YY: 10/2022
BOOT1/2: 0x00400000 4.00 Mb | 00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x747C00000 29.12 Gb
MT6765 HWs: 8A00 HWv: CA00 HWc: 0766 SWv: 0000 Evo: 0000 Helio Cervino|P35|G35|G36|G37|G50|MT8768t [v5]; FireFly [FF] support: Yes
MEID: 8996DA211E66A17AC064D5AF182039E0
SOCID: 7967A02170F65F8B0CC61CA38B4C5440AEC07360FFCC736512F73B11DF0E30BC
HRID: 85CB9D49485CBCC2BEEEAEC74DEE4DA7
RNID: 409141E07CEBED8B945553A83E02BA45 sync2 delayed
USB: HIGH-SPEED
DA Key: custom 1-|2-; Allow errors: No
Boot Ok 1 sec
SoC drivers: MediaTek PreLoader USB VCOM_V2023 (Android) v3.0.1512.0
[DA3] run warn(50) Additional functions may be limited
You may try with another DA f.e. base/2316 or select Boot [FF] or connect in BROM
If process freez, f.e. PMT read fail, set [DA3] to Off
Get 1st partition table... type 0x64 Ok 218 us GPT Ok
mbr protective;raw.len=8000
PGPT 53 entries
Device has no slots
Probe boot... recovery_vendor ramsidk.len=0; recovery_ramdisk ramsidk.len=0; vendor_boot ramsidk.len=0; recovery v2 gzip ramdisk.size=57.64 Mb; got 2 files; boot v2 gzip ramdisk.size=2.12 Mb; got 1 files; Ok 156 us
Probe vbmeta... Ok(4) 219 us
Product Brand: vivo
Product Device: V2236
Product Model: V2236
Product Name: V2236
SW: vivo/V2236/V2236:12/SP1A.210812.003/compiler11271556:user/release-keys
Patch Level: SP1A.210812.003
Display ID: PD2236DF_EX_A_12.0.25.4.W30.V000L1
SW Version: compiler11271556
Ver. CodeName: REL
Sec. Patch: 2025-05-01
Build Time: 27-11-2025 08:06:18 AM
Product Info: k65v1_32_bsp_2g_ago
SW: full_k65v1_32_bsp_2g_ago-user 12 SP1A.210812.003 compiler11271556 release-keys
Vivo OS: Funtouch OS 12 Global
Vivo Product: V2236
Vivo HW: PD2236DF_EXMA
Product Manfct: vivo
Build: vivo/V2236/V2236:12/SP1A.210812.003/compiler11271556:user/release-keys
Product Board: k65v1_32_bsp_2g_ago
Board Platform: mt6765
ID: vivo-v2236-k65v1-32-bsp-2g-ago
Strategy [vivo]
Firmware ID: MT6765_vivo_V2236_OSv12_PD2236DF_EX_A_12.0.25.4.W30.V000L1_SP1A.210812.003_k65v1_32_bsp_2g_ago
Android ver: 12
userdata: [f2fs] FBE [file based encryption] cache: [ext4]
Load userdata... Ok
userdata: 22.42 Gb [FS raw] encrypted
Set [Deep info] On to get modem, bootloader, frp and other info
Set [HW health] On to get hardware health state
Set [RPMB state] On to get RPMB state
Stop Connect v3.16 55 sec
Start FRP Try to keep Userdata v3.16
ID: vivo-v2236-k65v1-32-bsp-2g-ago
Strategy [vivo]
Firmware ID: MT6765_vivo_V2236_OSv12_PD2236DF_EX_A_12.0.25.4.W30.V000L1_SP1A.210812.003_k65v1_32_bsp_2g_ago
Android ver: 12
userdata: [f2fs] FBE [file based encryption] cache: [ext4]
Reset FRP... frp config found
wipe frp... Ok 1 sec Done(1)
Reset for vivo...
wipe backup... Ok 7 sec Done(1)
Stop FRP Try to keep Userdata v3.16 10 sec
If FRP still active make FRP with Userdata wipe
Start Reboot v3.16
reboot...
Stop Reboot v3.16 141 us Bye