1. Power off device
2. Remove Install battery if needed
3. Connect USB cable to powered off device
4. For New sec. Press and Hold Both Volume keys for Brom Mode
5. For Old sec. Press and Hold Volume UP for Brom Mode
6. Do not press any Key for PreLoader Mode
7. Install drivers if needed
====================================
- Connection : Flash Mode
- Method : By Model
- Brand : VIVO
- Model : Y30 (PD1987F)
- Process : Format | Reset FRP
====================================
Authenticating ... DONE
Initializing ... DONE
====================================
Waiting for device ...
Device found
MediaTek USB Port (COM3)
Mode : BootRom
Port : COM3
Handshaking ... DONE
Hw code: 0x0766 - [MT6765] - Helio P35/G35
Hw sub code: 0x8A00
Hw version: 0xCA00
Sw version: 0x0000
Sl auth: No
Da auth: Yes
Watchdog disable ... DONE
Protection disable ... DONE
Preparing Download Agent ...
DA Version : MTK_AllInOne_DA_v3.3001.2018/03/20.21:08_402229+403250
Handshaking : DONE
Loading Preloader : DONE
Booting device : DONE
Chip name : [MT6765]
Syncing with DA : DONE
Identifying Hardware ID ...
====================================
ChipID : MT6765
Software Ver : 0000
Hardware Ver : CA00
Secure Ver : 00
BootLdr Ver : 00
Ext RAM : 0x30000000
SRAM : 0x00040000
Storage : 0x1D20800000
====================================
RAM Size : 768.000 MB
SRAM Size : 256.000 KB
Storage Size : 116.508 GB
Storage Type : EMMC
====================================
Getting partition details : DONE
Partition count : 46
Searching for required data... DONE
Formatting device ... DONE
Searching for frp data... DONE
Resetting FRP...
USING ALGO - 1
Reset FRP DONE
Please disconnect device and reboot it manually
If device stuck on Logo, please use recovery to wipe it and reboot
UAT PRO : 133.01 | 18 - October - 2021
2. Remove Install battery if needed
3. Connect USB cable to powered off device
4. For New sec. Press and Hold Both Volume keys for Brom Mode
5. For Old sec. Press and Hold Volume UP for Brom Mode
6. Do not press any Key for PreLoader Mode
7. Install drivers if needed
====================================
- Connection : Flash Mode
- Method : By Model
- Brand : VIVO
- Model : Y30 (PD1987F)
- Process : Format | Reset FRP
====================================
Authenticating ... DONE
Initializing ... DONE
====================================
Waiting for device ...
Device found
MediaTek USB Port (COM3)
Mode : BootRom
Port : COM3
Handshaking ... DONE
Hw code: 0x0766 - [MT6765] - Helio P35/G35
Hw sub code: 0x8A00
Hw version: 0xCA00
Sw version: 0x0000
Sl auth: No
Da auth: Yes
Watchdog disable ... DONE
Protection disable ... DONE
Preparing Download Agent ...
DA Version : MTK_AllInOne_DA_v3.3001.2018/03/20.21:08_402229+403250
Handshaking : DONE
Loading Preloader : DONE
Booting device : DONE
Chip name : [MT6765]
Syncing with DA : DONE
Identifying Hardware ID ...
====================================
ChipID : MT6765
Software Ver : 0000
Hardware Ver : CA00
Secure Ver : 00
BootLdr Ver : 00
Ext RAM : 0x30000000
SRAM : 0x00040000
Storage : 0x1D20800000
====================================
RAM Size : 768.000 MB
SRAM Size : 256.000 KB
Storage Size : 116.508 GB
Storage Type : EMMC
====================================
Getting partition details : DONE
Partition count : 46
Searching for required data... DONE
Formatting device ... DONE
Searching for frp data... DONE
Resetting FRP...
USING ALGO - 1
Reset FRP DONE
Please disconnect device and reboot it manually
If device stuck on Logo, please use recovery to wipe it and reboot
UAT PRO : 133.01 | 18 - October - 2021