UFi Writing extcsd File Failed

Writing extcsd File Failed Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4a2 (0x483847346132), rev: 0xA5, serial number: 0x04E0D0EF
Manufacturing date: Feb 2018
CID: 90014A48 38473461 32A504E0 D0EF2518
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
Device version: 0x3805
Firmware version: 0xA5
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)

Loading file: "\C:\Users\Rehman%20Mobile\Desktop\Qmobile%20x36\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Failed to switch[155][0,155,0] (return code: 1, CMD Error: Timeout) !!!
Done
New EXT CSD info:
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x08
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00

 

[dondav77]

Stupid box

 

[markopolo]

Same failure here with the seme chip tried to write more chips but none of them worked realy a stupid box and software combo
I'd like to have my money back. If any of the developers is reading this plese stop selling crap and fulling people.

 

[dondav77]

Wasted money

 

[mahrez_tv]

Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8846-0801
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (HS SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 000000 (0x303030303030), rev: 0x56, serial number: 0x20160613
Manufacturing date: juin 2016
CID: 15010030 30303030 30562016 061354D0
CSD: 90270132 0F5903FF F6DB7FE0 8A40403A
Device version: 0x3237
Firmware version: 0xAC2C1067BAE19B91
EXT_CSD revision: 1.122 (MMC )
Partition info:
Boot1: 27.13 MiB
Boot2: 27.13 MiB
RPMB: 17.63 MiB
User area: 98.49 GiB(105,758,076,928 bytes)
GP1: 2.92 GiB (enhanced)
GP2: 3.72 GiB (enhanced)
GP3: 3.40 GiB
GP4: 2.35 GiB
Cache size: 1.82 GiB
Hardware reset function: 248
Secure Write Protect Information: 0x5A
Secure Feature support: 0xFB
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x21
Device support partitioning feature
Device cannot have enhanced technological features
Device partitioning possible
Boot configuration protection: 0xFB
Change of boot configuration register bits relating boot mode operation is permanently disabled.
Boot bus conditions: 0x49
Bus width: x4 (sdr/ddr), boot mode: sdr + hs, reset bus width to x1 sdr(default)
Boot area write protection: 0x70
Power-on write protection: not possible
Permanent write protection: not possible
Lock status: not locked
User area write protection: 0x16
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: locked permanently
moviNAND: card is run in boot mode.
eMMC 5.x Health report:
Device lifetime: Reserved
Estimation of the device lifetime (SLC): Exceeded its maximum estimated device life time
Estimation of the device lifetime (MLC): Exceeded its maximum estimated device life time