Help Wrong EMMC disk data; this may be an empty Flash IC!!!

[de Unlocker]

>>>Searching EMMC Devices....

MAE ToolSN 0172 TS37

>>>Testing EMMC disk read status....

Reading EMMC Capacity Info...
Capacity Size:31268536320Byte/29820MB/29.82GB;(Hex:0x0747C00000)
Wrong EMMC disk data; this may be an empty Flash IC!!!

 

[tito_20003]

MAE ToolSN 0172 TS37

Reading EMMC Capacity Info...
Capacity Size:31268536320Byte/29820MB/29.82GB;(Hex:0x0747C00000)
Wrong EMMC disk data; this may be an empty Flash IC!!!

This is connect prb

 

[budz1320]

Wrong EMMC disk data; this may be an empty Flash IC!
how can i fix this. problem a3s oppo

 

[javed 12]

Wrong EMMC disk data; this may be an empty Flash IC!
how can i fix this. problem a3s oppo

upload image isp you soldering

 

[BHAHAII]

i use this aps but same problem

 

[BHAHAII]

how can i fix it plz ?

 

[Robtech]

how can i fix it plz ?

take pic of your Ae tool adapter with connections

 

[BHAHAII]

do u mean it ?

 

[BHAHAII]

take pic of your Ae tool adapter with connections

do you mean it ?

Please login to view image

 

[Robtech]

do you mean it ?

View attachment 11416

BRO
1. connect back board to phone and connect charger for vcc and vccQ
2.if fails reduce the length of theb wires 100% done

 

[BHAHAII]

BRO
1. connect back board to phone and connect charger for vcc and vccQ
2.if fails reduce the length of theb wires 100% done

BRO sorry for my languege so i understand from u as i connect only cmd clk data and grnd then i connect the board to phone and connect the charge usb?
and wath about voltage i use on 3.3or 1.8

 

[Robtech]

BRO sorry for my languege so i understand from u as i connect only cmd clk data and grnd then i connect the board to phone and connect the charge usb?
and wath about voltage i use on 3.3or 1.8

does not matter but always leave it at 1.8v

 

[AnonDz]

do you mean it ?

View attachment 11416

solder only data0 cmd clk and gnd and use usb for vcc and vccq 100% connection

 

[BHAHAII]

solder only data0 cmd clk and gnd and use usb for vcc and vccq 100% connection

SALAM THANKYOU ANONDZ
WITH BATTERIE OR WITHOUTH

 

[Robtech]

SALAM THANKYOU ANONDZ
WITH BATTERIE OR WITHOUTH

NO NEED FOR BATTERY ONLY CHARGER