Xioami Mi 9 Se device how to do it IMEI repair process
QCN FILE
XQCN FILE
DOWNLOADS:
TWRP
Magisk - V19
WriteDualIMEI_W_G_eMMC.rar
QPST Tool v2.7.472 - QPST Tool
USB Driver
Xioami Mi 9 SE IMEI Method
Bootlock must be turned on.
Download the links provided above.
Install the top twrp.
To do this, take the fastboot mode and
fastboot flash recovery on the CMD screen
TWRP will pop up after I have given the top of the magisk i install into memory.
Restart device becomes root.
Then make a backup with qpst and xqcn. To do this, enter the following commands into the CMD screen.
Type diagnostics. You need to have Qualcomm USB drivers installed on your computer. You should see the diagnostics port in the device manager.
Open the Qpst program and start the client from the top, then press software download.
Make a backup of xqcn from the Back-Up section. When finished, enter twrp again into the advanced terminal and delete the blocks.
Commands:
Reboot.
Then open the device again and turn the diag on again with commands.
Then do IMEI repair with dual writer IMEI program.
Then restore the xqcn backup you received with the Qpst program and restart it.
Good luck.
Things to note Do not reset deleting IMEI if reset with original recovery.
No problems with the update.
Resetting with Twrp will not delete the IMEI.
QCN FILE
XQCN FILE
DOWNLOADS:
TWRP
Magisk - V19
WriteDualIMEI_W_G_eMMC.rar
QPST Tool v2.7.472 - QPST Tool
USB Driver
Xioami Mi 9 SE IMEI Method
Bootlock must be turned on.
Download the links provided above.
Install the top twrp.
To do this, take the fastboot mode and
fastboot flash recovery on the CMD screen
TWRP will pop up after I have given the top of the magisk i install into memory.
Restart device becomes root.
Then make a backup with qpst and xqcn. To do this, enter the following commands into the CMD screen.
Code:
adb shell
su
setprop sys.usb.config diag,adb
Type diagnostics. You need to have Qualcomm USB drivers installed on your computer. You should see the diagnostics port in the device manager.
Open the Qpst program and start the client from the top, then press software download.
Make a backup of xqcn from the Back-Up section. When finished, enter twrp again into the advanced terminal and delete the blocks.
Commands:
Code:
dd if=/dev/zero of=/dev/block/sdf6
dd if=/dev/zero of=/dev/block/sdf7
dd if=/dev/zero of=/dev/block/sde33
Reboot.
Then open the device again and turn the diag on again with commands.
Then do IMEI repair with dual writer IMEI program.
Then restore the xqcn backup you received with the Qpst program and restart it.
Good luck.
Things to note Do not reset deleting IMEI if reset with original recovery.
No problems with the update.
Resetting with Twrp will not delete the IMEI.