DTPro Xiaomi Redmi Note 13 4G [Sapphire] Board ID 1.40 | Hyper OS 2 •IMEI repair Ok!..

[DTPRO Tool]

Qualcomm Module - Select Brand and Model in Xboot list For to Start Job!.

These devices require the Eng Rom Flashing
- This operation is completely free in DTpro tool - NO credits required.

Note : Use Eng rom Tested for Our team! Download from Website..
Connect the device to the edl mode.
Load Eng rom - and Write!...

#Step1 Eng ROM!...


Plug back into edl - perform the Reset EFS Operation!


Enter Recovery Mode - Select Mi Assistant Mode!
- Press the Mi Assistant button in Software and select the Reset EFS option!

Please login to view image

Turn on the device
Press the Special Task button. Select the Xiaomi Fix Sec option.

Please login to view image

Select the Diag port in our software.
Press the Repair CID option. Enter the new IMEIs [respecting the original TAC-FAC of the IMEI].

Please login to view image

Device will reboot!...
Check the IMEIS, insert a working SIM card, and check the signal.
-Enter Fastboot and flash the tested firmware!.. in Mi Flash tab

Please login to view image

Here's a device with stock ROM!...
Working perfectly

Please login to view image

 

[zorgy_1979]

Done this phone. For me very important parts. After repair network present only one imei. Go to factory partitions and write both imeis one more time. Now two imei present and network work on eng rom. After flash via fastboot WITHOUT MODEM. After flash with modem see nv error and do all one nore time. Flash and see that network is absent. Via 9008 flash only modem_a and Modem_b non-hlos file in two spots. And network is work correctly on both sim. Done on same firmware as support write here. Dont know its important or not i disable ota via adb. Thanks for dt-pro team its really exclusie solution. Also important repair cid work normal only on win 11/

 

[gsm_codex]

Hyperos 2.0.11.0 Available?
Android 15