You can handle this unit ZTE Blade A56 / P606F21, based on Unisoc T7200, under Android 15 via ADL in CM2SP3:
FW readout is uploaded to infinity-box.com file storaga for all customers that need it.
Tnx to Infinity developers.
BR, DebeliaMark, BG
Code:
Start Connect SoC ADL Boot [ADL] v2.42
Power device Off and connect cable now
Waiting for device... mode-b (new)
Device found; PTFN: SPRD U2S Diag (COM21) 1782:4D00
Enter ADL mode...
Reset Interface...
Verify... ADL mode On
Load config... Ok
Set config... Ok
Run... Ok
Waiting for device...
Device found; PTFN: SPRD U2S Diag (COM21) 1782:4D00
Enable charge... Ok
Start ROMCODE... Ok
ROMCODE Handshake... Ok
Exec[2]... Ok
Version: 0x10; Memory: 0x102; Random: 0x00
Enable RAW... Ok
Disable transcode... Ok
If device do not respond for a long time it means it's not supported yet!
Loader exec[0] Ok
Dev UID: 246561e6702463f88feabcae295cccded4db13c44c74de35df2936101c691130
hwid cache absent
get storage info... EMMC
For advanced features like EXTCSD use Boot [FF] FireFly
Load partition table... 1st GPT Ok
Partitions: 79
Connected
[MemTool] load 79 items
Partitions: 79
Get slot info... slot: b
get sw info...
Probe boot...
vendor_boot_b;lz4;ramdisk size 71.24 Mb;2 found Ok 5 sec
Probe vbmeta... Ok(6) 343 us
Product Brand: ZTE
Product Device: P606F21
Product Model: Z2473
Product Name: EEA_P606F21
Patch Level: AP3A.240905.015.A2
SW Version: 20250811.184239
Ver. CodeName: REL
Sec. Patch: 2025-08-05
Build Time: 11.08.2025 10:43:32
Product Info: ussi_arm64
Display ID: MyOS15.0.2_Z2473_EEA
Product Manfct: ZTE
Board Platform: ums9230
Product Board: ums9230_6h10
ID: zte-zte-z2473-p606f21-eea-p606f21-ums9230-6h10
Strategy: [zte]
Firmware ID: UMS9230_ZTE_Z2473_OSv15_MyOS15.0.2_Z2473_EEA_AP3A.240905.015.A2_ussi_arm64
Android ver: 15
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
[MemTool] load 79 items
Backup exist D:\InfinityBox\CM2SP3\backup\none_246561e6702463f8_zte-zte-z2473-p606f21-eea-p606f21-ums9230-6h10.7z
Probe bootloader...
bootloader engine hwid fail
Stop [Job 23558102] Connect v2.42 42 sec
Start Read FW SoC ADL Boot [ADL] v2.42
Selected: E:\GSM1\ZTE\ZTE Blade A56\
Disk free space: 2352.25 Gb
Save to E:\GSM1\ZTE\ZTE Blade A56\UMS9230_ZTE_Z2473_OSv15_MyOS15.0.2_Z2473_EEA_AP3A.240905.015.A2_ussi_arm64\
Partitions to read: 71
Read...
Read #1/79 prodnv 64.00 Mb Ok [64.00 Mb] 3 sec
Sparse 16384 blocks... ratio: 96% 234 us => 2.48 Mb
Read #2/79 miscdata 1024.00 Kb Ok [1024.00 Kb] 62 us => 544.00 Kb
Read #3/79 misc 1024.00 Kb Ok [1024.00 Kb] 63 us => 64.00 Kb
Read #4/79 trustos_a 6.00 Mb Ok [6.00 Mb] 328 us => 3.41 Mb => 3.40 Mb
Read #5/79 trustos_b 6.00 Mb Ok [6.00 Mb] 328 us => 3.41 Mb => 3.40 Mb
Read #6/79 sml_a 1024.00 Kb Ok [1024.00 Kb] 63 us => 160.00 Kb => 130.20 Kb
Read #7/79 sml_b 1024.00 Kb Ok [1024.00 Kb] 62 us => 160.00 Kb => 130.21 Kb
Read #8/79 uboot_a 9.00 Mb Ok [9.00 Mb] 485 us => 1.25 Mb => 1.23 Mb
Read #9/79 uboot_b 9.00 Mb Ok [9.00 Mb] 469 us => 1.25 Mb => 1.23 Mb
Skip #10/79 uboot_log 21.00 Mb
Read #11/79 logo_a 60.00 Mb Ok [60.00 Mb] 3 sec => 5.06 Mb
Read #12/79 logo_b 60.00 Mb Ok [60.00 Mb] 3 sec => 5.06 Mb
Read #13/79 fbootlogo 8.00 Mb Ok [8.00 Mb] 453 us => 7.44 Mb
Read #14/79 l_fixnv1_a 2.00 Mb Ok [2.00 Mb] 109 us => 857.85 Kb
Read #15/79 l_fixnv2_a 2.00 Mb Ok [2.00 Mb] 110 us => 864.00 Kb => 858.35 Kb
Read #16/79 l_fixnv1_b 2.00 Mb Ok [2.00 Mb] 110 us => 857.85 Kb
Read #17/79 l_fixnv2_b 2.00 Mb Ok [2.00 Mb] 109 us => 864.00 Kb => 858.35 Kb
Read #18/79 calinv 16.00 Mb Ok [16.00 Mb] 828 us => 32.00 Kb
File has only zeroes
Skip #19/79 l_runtimenv1 2.00 Mb
Skip #20/79 l_runtimenv2 2.00 Mb
Read #21/79 persist 2.00 Mb Ok [2.00 Mb] 110 us => 32.00 Kb
File has only zeroes
Read #22/79 ztecfg 8.00 Mb Ok [8.00 Mb] 421 us => 32.00 Kb
Read #23/79 ztepersist 32.00 Mb Ok [32.00 Mb] 1 sec
Sparse 8192 blocks... ratio: 48% 1 sec => 16.58 Mb
Read #24/79 l_modem_a 25.00 Mb Ok [25.00 Mb] 1 sec
Read #25/79 l_modem_b 25.00 Mb Ok [25.00 Mb] 1 sec
Read #26/79 l_deltanv_a 1024.00 Kb Ok [1024.00 Kb] 47 us => 32.00 Kb
Read #27/79 l_deltanv_b 1024.00 Kb Ok [1024.00 Kb] 46 us => 32.00 Kb
Read #28/79 l_gdsp_a 10.00 Mb Ok [10.00 Mb] 531 us
Read #29/79 l_gdsp_b 10.00 Mb Ok [10.00 Mb] 531 us
Read #30/79 l_ldsp_a 20.00 Mb Ok [20.00 Mb] 1 sec
Read #31/79 l_ldsp_b 20.00 Mb Ok [20.00 Mb] 1 sec
Read #32/79 l_agdsp_a 6.00 Mb Ok [6.00 Mb] 328 us
Read #33/79 l_agdsp_b 6.00 Mb Ok [6.00 Mb] 328 us
Read #34/79 pm_sys_a 1024.00 Kb Ok [1024.00 Kb] 63 us
Read #35/79 pm_sys_b 1024.00 Kb Ok [1024.00 Kb] 62 us
Read #36/79 teecfg_a 1024.00 Kb Ok [1024.00 Kb] 63 us => 128.00 Kb => 121.65 Kb
Read #37/79 teecfg_b 1024.00 Kb Ok [1024.00 Kb] 62 us => 128.00 Kb => 121.65 Kb
Read #38/79 hypervsior_a 10.00 Mb Ok [10.00 Mb] 532 us => 32.00 Kb
File has only zeroes
Read #39/79 hypervsior_b 10.00 Mb Ok [10.00 Mb] 516 us => 32.00 Kb
File has only zeroes
Read #40/79 boot_a 64.00 Mb Ok [64.00 Mb] 3 sec
Read #41/79 boot_b 64.00 Mb Ok [64.00 Mb] 3 sec
Read #42/79 vendor_boot_a 100.00 Mb Ok [100.00 Mb] 5 sec
Read #43/79 vendor_boot_b 100.00 Mb Ok [100.00 Mb] 5 sec
Read #44/79 init_boot_a 8.00 Mb Ok [8.00 Mb] 437 us
Read #45/79 init_boot_b 8.00 Mb Ok [8.00 Mb] 437 us
Read #46/79 dtb_a 8.00 Mb Ok [8.00 Mb] 422 us => 32.00 Kb
File has only zeroes
Read #47/79 dtb_b 8.00 Mb Ok [8.00 Mb] 421 us => 32.00 Kb
File has only zeroes
Read #48/79 dtbo_a 8.00 Mb Ok [8.00 Mb] 422 us
Read #49/79 dtbo_b 8.00 Mb Ok [8.00 Mb] 422 us
Read #50/79 super 12.00 Gb Ok [12.00 Gb] 10 min 10 sec => 11.81 Gb
Skip #51/79 cache 500.00 Mb
Skip #52/79 blackbox 500.00 Mb
Read #53/79 vbmeta_a 1024.00 Kb Ok [1024.00 Kb] 47 us
Read #54/79 vbmeta_b 1024.00 Kb Ok [1024.00 Kb] 62 us
Skip #55/79 metadata 64.00 Mb
Skip #56/79 sysdumpdb 10.00 Mb
Read #57/79 vbmeta_system_a 1024.00 Kb Ok [1024.00 Kb] 79 us => 32.00 Kb => 4.00 Kb
Read #58/79 vbmeta_system_b 1024.00 Kb Ok [1024.00 Kb] 62 us => 32.00 Kb => 4.00 Kb
Read #59/79 vbmeta_vendor_a 1024.00 Kb Ok [1024.00 Kb] 63 us => 32.00 Kb => 4.00 Kb
Read #60/79 vbmeta_vendor_b 1024.00 Kb Ok [1024.00 Kb] 62 us => 32.00 Kb => 4.00 Kb
Read #61/79 vbmeta_system_ext_a 1024.00 Kb Ok [1024.00 Kb] 63 us => 32.00 Kb => 4.00 Kb
Read #62/79 vbmeta_system_ext_b 1024.00 Kb Ok [1024.00 Kb] 47 us => 32.00 Kb => 4.00 Kb
Read #63/79 vbmeta_product_a 1024.00 Kb Ok [1024.00 Kb] 47 us => 32.00 Kb => 4.00 Kb
Read #64/79 vbmeta_product_b 1024.00 Kb Ok [1024.00 Kb] 47 us => 32.00 Kb => 4.00 Kb
Read #65/79 vbmeta_odm_a 1024.00 Kb Ok [1024.00 Kb] 47 us => 32.00 Kb => 4.00 Kb
Read #66/79 vbmeta_odm_b 1024.00 Kb Ok [1024.00 Kb] 63 us => 32.00 Kb => 4.00 Kb
Read #67/79 avbmeta_rs_a 1024.00 Kb Ok [1024.00 Kb] 62 us => 32.00 Kb
File has only zeroes
Read #68/79 avbmeta_rs_b 1024.00 Kb Ok [1024.00 Kb] 63 us => 32.00 Kb
File has only zeroes
Read #69/79 common_rs1_a 8.00 Mb Ok [8.00 Mb] 422 us => 2.00 Mb
Read #70/79 common_rs1_b 8.00 Mb Ok [8.00 Mb] 422 us => 32.00 Kb
File has only zeroes
Read #71/79 common_rs2_a 16.00 Mb Ok [16.00 Mb] 828 us => 32.00 Kb
File has only zeroes
Read #72/79 common_rs2_b 16.00 Mb Ok [16.00 Mb] 828 us => 32.00 Kb
File has only zeroes
Read #73/79 common_rs3_a 32.00 Mb Ok [32.00 Mb] 1 sec => 32.00 Kb
File has only zeroes
Read #74/79 common_rs3_b 32.00 Mb Ok [32.00 Mb] 1 sec => 32.00 Kb
File has only zeroes
Read #75/79 reserve1 8.00 Mb Ok [8.00 Mb] 406 us => 32.00 Kb
File has only zeroes
Read #76/79 reserve2 16.00 Mb Ok [16.00 Mb] 844 us => 32.00 Kb
File has only zeroes
Skip #77/79 userdata 44.26 Gb
Read #78/79 splloader 512.00 Kb Ok [512.00 Kb] 32 us => 96.00 Kb => 64.59 Kb
Read #79/79 splloader_bak 512.00 Kb Ok [512.00 Kb] 31 us => 96.00 Kb => 64.59 Kb
Saved 56 of 71 [12.34 Gb] to E:\GSM1\ZTE\ZTE Blade A56\UMS9230_ZTE_Z2473_OSv15_MyOS15.0.2_Z2473_EEA_AP3A.240905.015.A2_ussi_arm64\
Saved E:\GSM1\ZTE\ZTE Blade A56\UMS9230_ZTE_Z2473_OSv15_MyOS15.0.2_Z2473_EEA_AP3A.240905.015.A2_ussi_arm64\
Verify firmware [UMS9230_ZTE_Z2473_OSv15_MyOS15.0.2_Z2473_EEA_AP3A.240905.015.A2_ussi_arm64]... Firmware is unknown
Please upload https://infinity-box.com/?r=100020 859 us
Upload file to server? YesFW readout is uploaded to infinity-box.com file storaga for all customers that need it.
Tnx to Infinity developers.
BR, DebeliaMark, BG
