UFi UFI Android Tool can not Load Multi Partition Firmware

[Harmony-M]

UFI Android Tool can not Load Multi Partition Firmware

Please login to view image

​

Can anyone guide me to flash Xiaomi Joyeuse?

 

[PeterM]

UFI Android Tool can not Load Multi Partition Firmware

View attachment 39121

​

Can anyone guide me to flash Xiaomi Joyeuse?

Only rename partition_ext.xml to partition_ext.xml.bcp,and will load

 

[Harmony-M]

Firmware package: joyeuse_global_images_V12.5.2.0
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM116)
Connection status: EHCI:HUB:HUB[#5]:USB 2.10 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0x1608b2f1
MSM HW ID: 0x001490e1 , OEM ID: 0x0072 (Xiaomi), MODEL ID: 0x0000
OEM Public Key Hash: 1bebe3863a6781db4b01086063007334de9e5ca14971c7c4f4358ec9d79cda4692ce5e948c6fd409408f4c919fcadfe3
Comm error 997: Overlapped I/O operation is in progress
Comm error 997: Overlapped I/O operation is in progress
Error: failed on sending HELLO response!
Disconnect USB cable, battery and try again!

 

[Harmony-M]

Where are the ufi supporters?

Have they gone to the mercy of God?

 

[Madgoeslim]

Comm error 997: Overlapped I/O operation is in progress
Comm error 997: Overlapped I/O operation is in progress
Error: failed on sending HELLO response!
Disconnect USB cable, battery and try again!

Hi,
This problem is caused by a less compatible usb 3.0 chip on the pc/laptop motherboard.
Until now, access for flashing mode, on any platform and any connection still uses the USB 2.0/high speed protocol,
some old vendors such as MTK even still use the USB 1.0/full speed protocol.
Thats why, sometime you face this error when you use USB 3.0 port with USB type C data cable.
To solve the above problem, try using a USB hub with a USB 2.0 interface.

Hope this can help you out.
B.R
madgoeslim

 

[Harmony-M]

Hi,
This problem is caused by a less compatible usb 3.0 chip on the pc/laptop motherboard.
Until now, access for flashing mode, on any platform and any connection still uses the USB 2.0/high speed protocol,
some old vendors such as MTK even still use the USB 1.0/full speed protocol.
Thats why, sometime you face this error when you use USB 3.0 port with USB type C data cable.
To solve the above problem, try using a USB hub with a USB 2.0 interface.

Hope this can help you out.
B.R
madgoeslim

I changed the usb port several times
I even changed the cable
But I still get this error

 

[xxunlock]

The question is simple

Please login to view image

check

 

[Harmony-M]

The question is simple

View attachment 41992

check

Please login to view image

 

[KhalIman]

ufi soft goes from good bad then worst , i don't know why?????

 

[Harmony-M]

Firmware package: joyeuse_global_
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM30)
Connection status: EHCI:HUB:HUB[#5]:USB 2.10 High-Speed
USB Device: [Qualcomm CDMA Technologies MSM] QUSB_BULK_CID:0416_SN:E5AD6027
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0xe5ad6027
MSM HW ID: 0x001490e1 , OEM ID: 0x0072 (Xiaomi), MODEL ID: 0x0000
OEM Public Key Hash: 1bebe3863a6781db4b01086063007334de9e5ca14971c7c4f4358ec9d79cda4692ce5e948c6fd409408f4c919fcadfe3
Comm error 997: Overlapped I/O operation is in progress
Comm error 997: Overlapped I/O operation is in progress
Error: failed on sending HELLO response!
Disconnect USB cable, battery and try again!