UMT ★★★ Post All Successfully Repaired Phones Ultimate Multi Tool ★★★

[GsmToto]

Device : Samsung Galaxy S23 Ultra (SM-S918B) BIT-8
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-S918B BIT-8.ufl]
Preparing Loader...Done
Sending Loader [SM-S918B BIT-8]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 512 GB
LU Count : 6 [0x076FA000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [99]
Reading Device Information...OK [Sign]
Build : S918BXXS8DYF2
Int. Build : SM-S918B_EUR_XX_QKEY1
boot.os_ver : 13
boot.sec_patch : 2025-06-01
sys.os_ver : 15
sys.sec_patch : 2025-06-01
vendor.os_ver : 13
vendor.sec_patch : 2025-06-01
Resetting FRP Lock...Failed
Using Patch Method... Done Done
Operation Finished.
QcFire Ver. 12.2

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:PL][INFINIX V2]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM8)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&236cc9f3&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : 84CDB56FF0F752AD5F2E79E8FF08A6C6
SoC ID[0] : 44B03DD25013C354ACD175F4981EC958
SoC ID[1] : 62376DC75A8A648536FE09DBA1627D2E
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Local SLA (Generic)...OK
HRID : 49DC1A44661D095BDACDCC2A23F7E00B
RID : 49DC1A44661D095BDACDCC2A23F7E00B
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : hC8aP>
CID : 90014A68433861503E02C9BCA18877B5
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Manuf. : INFINIX MOBILITY LIMITED
Ven. Model : Infinix X682B
Platform : mt6768
Ven. Date : Fri Jul 29 23:47:55 CST 2022
Ver. Inc. : 220729V358
prd.os_ver : 10
prd.sec_patch : 2022-07-05
sys.os_ver : 10
sys.sec_patch : 2022-07-05
Bootloader : LOCKED
Erasing Userdata...OK
IMPORTANT : If phone reboots to recovery, simply Format from there.
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v2.6]

 

[GsmToto]

Samsung SM-A326B FRP removed in download mode

Model : MediaTek FRP
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM4 : SAMSUNG Mobile USB Modem #9
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : MT6853 [HiSpeed]
Closing Session...Done
Port: : COM8 : SAMSUNG Mobile USB Modem #9
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:19
[UltimateSams v0.7]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:PL][INFINIX V1]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM10)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&236cc9f3&0&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : 92CBA5A0953FBB72D96A563EDF1B3583
SoC ID[0] : 73203B7C003EBC073A7523A25CE93700
SoC ID[1] : F1DB6B98FED22266A1FF4E2612B93858
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Local SLA...OK
HRID : 2960F49C1E32CF4E6C7915AB4A3E4469
RID : 2960F49C1E32CF4E6C7915AB4A3E4469
Int. RAM : 0x000000000003A600 [233,50 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : TJ3032
CID : 700100544A3330333201020989F4698F
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000000748000000 [29,13 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Fri Jan 12 15:35:34 CST 2024
Display ID : TECNO-RGo-32-240110V97
Ver. Inc. : 240112V566
Locale : en-US
Patch : 2024-01-01
dtbo.fprint : TECNO/BD4a-OP/TECNO-BD4a:11/RP1A.200720.011/240110V280
prd.fprint : TECNO/TSSI/AGo-32:11/RP1A.200720.011/240110V97
prd.os_ver : 11
prd.sec_patch : 2024-01-01
sys.fprint : TECNO/TSSI/AGo-32:11/RP1A.200720.011/240110V97
sys.os_ver : 11
sys.sec_patch : 2024-01-01
sys_ext.fprint : TECNO/TSSI/AGo-32:11/RP1A.200720.011/240110V97
sys_ext.os_ver : 11
sys_ext.sec_patch : 2024-01-01
Bootloader : LOCKED
Erasing Userdata...OK
IMPORTANT : If phone reboots to recovery, simply Format from there.
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v2.6]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP (Oppo)
LOCAL SLA : OFF
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM7)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&250b5bc3&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:False]
MEID : 32D6DA4545D7BD39EEBFDCE2A3A3DC11
SoC ID[0] : 1599D95476366AF19CD3DF159C4C10F5
SoC ID[1] : 0A82831C8985321933FE324880C2EB3F
Running Exploit...Done
Downloading Preloader...OK
PRELOADER : preloader_v820.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[INTERNAL] DA Selected!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : D601034133413434321028CEC524C849 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : 57FBCD633E25B6DC0A417E0597F6455C
RID : 57FBCD633E25B6DC0A417E0597F6455C
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : A3A442
CID : D601034133413434321028CEC524C849
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001CCF000000 [115,23 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : UNDEFINED
Reading Partition Table...OK
Brand : WIKO
Manuf. : WIKO
Model : VHEM
Device : VHEM
And. Ver. : 12
Prod. Name : VHEM
Build Dt. : Thu Jun 16 23:39:08 CST 2022
Display ID : SP1A.210812.016 release-keys
Ver. Inc. : 1655393948
Patch : 2022-05-05
dtbo.fprint : WIKO/VHEM/VHEM:12/SP1A.210812.016/1654183838
prd.fprint : WIKO/VHEM/VHEM:12/SP1A.210812.016/1654183838
prd.os_ver : 12
prd.sec_patch : 2022-05-05
sys.fprint : WIKO/VHEM/VHEM:12/SP1A.210812.016/1654183838
sys.os_ver : 12
sys.sec_patch : 2022-05-05
Bootloader : LOCKED
Resetting FRP...OK
Executing Safe Format (Oppo)...Done
If phone stuck on recovery, try [Fix Recovery].
Operation Finished.
[UltimateMTK2 v2.4]
Log Saved : 20485901_076924.log