UMT ★★★ Post All Successfully Repaired Phones Ultimate Multi Tool ★★★

[GsmToto]

Device : Nokia 3.2 (TA-1164)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1E00B00 [8937] 71953500
OPK_DATA : 561ABA875220DEA1B37EDA37DF0CB9D6458C9F0B62EADE954C4 07F8E1C08641D2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_037]...Done
Executing Loader...OK
Hardware : 8937, FMAGEA (eMMC), 16 GB
LU Count : 3 [0x01D40000] [0x00002000] [0x00002000]
Payload Info : [IN: 524288] [ OUT: 1048576] [SafeMode:OFF]
Reading Partition Table...OK [64]
Reading Device Information...OK
Device : HMD Global Nokia 3.2 [DPL_sprout]
Brand : Nokia
Prod.Name : Deadpool_00WW
Software : 00WW_1_41C_SP03, 00WW_1_41G [Sun Feb 16 13:57:23 CST 2020]
Android Ver. : 9
Patch Level : 2020-02-05
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 13.0

 

[GsmToto]

SELECTED: Tiger T612(UMS9230)
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM5)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 744448 [5e] 123E4A9C
UID: M4A897_25_21_28
Bootable A/B Slot: _a

Disk Size: 119.17 GB
Storage: UFS

Read partition info is supported by loader.
SN: 0000000000000

CPU NAME: T612
Reading: miscdata
Reading: misc
Saving bootloader control block
Reading: l_fixnv1_a
Reading: l_fixnv2_a
Reading: splloader
Found [persist] [persist] Size to download: 2 MB
Reading: persist
Backup saved to: C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\flashmode_security_backup\T612_12480154AM001664 ___security_backup.tar
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: UMT Unisoc Module 1.5

 

[ayyaz asghar]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:2025][VIVO V4]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM78)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&34017522&0&5
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : BE5CCF018EF40751184804803A5D4BE8
SoC ID[0] : C3A1D863241B149BCE4D942277E1D82A
SoC ID[1] : CF307A7BF89FFA331892DB51334D4B5C
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
HRID : E8C76117331E78F2AA47A600D8AA75EB
RID : E8C76117331E78F2AA47A600D8AA75EB
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A68423861503E03006DC26BC779
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 40%-50% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Prod. Ver. : PD2036F_EX_A_6.16.30
Hw. Ver. : PD2036F_EXMA
Build Dt. : Mon Oct 21 18:12:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20241021.181531
Locale : en-US
Patch : 2023-05-01
prd.fprint : vivo/2026/2026:11/RP1A.200720.012/compiler1021181211
prd.os_ver : 11
prd.sec_patch : 2023-05-01
sys.fprint : vivo/2026/2026:11/RP1A.200720.012/compiler1021181211
sys.os_ver : 11
sys.sec_patch : 2023-05-01
vendor.fprint : vivo/2026/2026:11/RP1A.200720.012/compiler1021181211
vendor.os_ver : 11
vendor.sec_patch : 2020-03-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v3.0]
Log Saved : 20260219_110205.log

 

[ayyaz asghar]

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek USB Port (COM79)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&34017522&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 255677D023812E4C85D7F0E096645404
SoC ID[0] : BE64771D5528B73469CD1C6335B3B3C5
SoC ID[1] : 18C0D9863BB4EA3953E13671629F82A5
Running Exploit... Installing Filter... OK Done
Downloading Preloader...OK
PRELOADER : preloader_k62v1_64_bsp.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[INTERNAL] DA Selected!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 15010051583633414209D125D296976B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : C365128CE7620D6469C3323AE5A31B71
RID : C365128CE7620D6469C3323AE5A31B71
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QX63AB
CID : 15010051583633414209D125D296976B
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : LIFE TIME USAGE EXCEED
Life. Est.B : LIFE TIME USAGE EXCEED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1820
Device : PD1818HF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818HF_EX_A_2.0.6
Prod. Name : PD1818HF_EX
Build Dt. : Mon Nov 29 16:27:26 CST 2021
Display ID : O11019 release-keys
Ver. Inc. : 1638174452
Locale : en-US
Patch : 2021-10-01
Bootloader : LOCKED
Erasing Userdata...OK
IMPORTANT : If phone reboots to recovery, simply Format from there.
Operation Finished.
[UltimateMTK2 v3.0]
Log Saved : 20260222_130004.log

 

[ayyaz asghar]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM78)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&34017522&0&5
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 255677D023812E4C85D7F0E096645404
SoC ID[0] : BE64771D5528B73469CD1C6335B3B3C5
SoC ID[1] : 18C0D9863BB4EA3953E13671629F82A5
Running Exploit...Done
Downloading Preloader...OK
PRELOADER : preloader_k62v1_64_bsp.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[INTERNAL] DA Selected!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 15010051583633414209D125D296976B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : C365128CE7620D6469C3323AE5A31B71
RID : C365128CE7620D6469C3323AE5A31B71
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QX63AB
CID : 15010051583633414209D125D296976B
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : LIFE TIME USAGE EXCEED
Life. Est.B : LIFE TIME USAGE EXCEED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1820
Device : PD1818HF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818HF_EX_A_2.0.6
Prod. Name : PD1818HF_EX
Build Dt. : Mon Nov 29 16:27:26 CST 2021
Display ID : O11019 release-keys
Ver. Inc. : 1638174452
Locale : en-US
Patch : 2021-10-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v3.0]
Log Saved : 20260222_130912.log

 

[GsmToto]

Device : Vivo V15 Pro
Operation : Format FS 2 (Vivo)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1500900 [SM6150] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A53 9670EA259771BA
Initializing Protocol...OK
Using Pre-Defined Loader [V15_Pro.ufl]
Preparing Loader...Done
Sending Loader [V15_Pro]...Done
Executing Loader...OK
Hardware : SM6150, 3V6CMB (eMMC), 128 GB
LU Count : 4 [0x0E8F6000] [0x00002000] [0x00002000] [0x00008000]
Payload Info : [IN: 262144] [ OUT: 1048576] [SafeMode:ON]
Reading Partition Table...OK [61]
Reading Device Information...OK
Software : , eng.compil.20241018.145237 [Fri Oct 18 14:52:37 CST 2024]
Android Ver. : 11
Patch Level : 2021-09-01
Preparing Data...Done
Formatting Userdata......Done
Resetting FRP Lock........Done
Operation Finished.
QcFire Ver. 13.2

 

[GsmToto]

Model : Vivo V20 (PD2039F)
Operation : Erase Userdata
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1901400 [SM6250] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A53 9670EA259771BA
Initializing Protocol...OK
Preparing Loader...Done
Sending Loader [PD2039F]...Done
Executing Loader...OK
Initializing Storage...OK
Read : Protected
Write : Protected
Alt. Write : Allowed
Alt. Write is allowed, using Factory Format Method...Done
Erasing FRP Data...Done
Operation Finished.
QcFire Ver. 13.2

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:2025][VIVO V4]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM5)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&67fe735&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : 10B5CDEF53E1567EE7790F23F6AABD7A
SoC ID[0] : 552847EE59FF6196567DADD9E01EFEA7
SoC ID[1] : 438292044B03ACD762819F6700DF3289
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
HRID : B9CA40C9AFAFBFB759A627D44EA9A12D
RID : B9CA40C9AFAFBFB759A627D44EA9A12D
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DV6DMB
CID : 150100445636444D4202CD0668C466A1
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1EC00000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD1913F_EX
And. Ver. : 12
Build Dt. : Mon Oct 21 14:44:56 CST 2024
Display ID : SP1A.210812.003 release-keys
Ver. Inc. : compiler10211448
Locale : en-US
Patch : 2022-12-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v3.1]