UMT ★★★ Post All Successfully Repaired Phones Ultimate Multi Tool ★★★

GsmToto · Feb 13, 2026

Device : Nokia 3.2 (TA-1164)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1E00B00 [8937] 71953500
OPK_DATA : 561ABA875220DEA1B37EDA37DF0CB9D6458C9F0B62EADE954C4 07F8E1C08641D2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_037]...Done
Executing Loader...OK
Hardware : 8937, FMAGEA (eMMC), 16 GB
LU Count : 3 [0x01D40000] [0x00002000] [0x00002000]
Payload Info : [IN: 524288] [ OUT: 1048576] [SafeMode:OFF]
Reading Partition Table...OK [64]
Reading Device Information...OK
Device : HMD Global Nokia 3.2 [DPL_sprout]
Brand : Nokia
Prod.Name : Deadpool_00WW
Software : 00WW_1_41C_SP03, 00WW_1_41G [Sun Feb 16 13:57:23 CST 2020]
Android Ver. : 9
Patch Level : 2020-02-05
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 13.0

GsmToto · Feb 15, 2026

SELECTED: Tiger T612(UMS9230)
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM5)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 744448 [5e] 123E4A9C
UID: M4A897_25_21_28
Bootable A/B Slot: _a

Disk Size: 119.17 GB
Storage: UFS

Read partition info is supported by loader.
SN: 0000000000000

CPU NAME: T612
Reading: miscdata
Reading: misc
Saving bootloader control block
Reading: l_fixnv1_a
Reading: l_fixnv2_a
Reading: splloader
Found [persist] [persist] Size to download: 2 MB
Reading: persist
Backup saved to: C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\flashmode_security_backup\T612_12480154AM001664 ___security_backup.tar
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: UMT Unisoc Module 1.5

ayyaz asghar · Feb 19, 2026

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:2025][VIVO V4]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM78)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&34017522&0&5
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : BE5CCF018EF40751184804803A5D4BE8
SoC ID[0] : C3A1D863241B149BCE4D942277E1D82A
SoC ID[1] : CF307A7BF89FFA331892DB51334D4B5C
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
HRID : E8C76117331E78F2AA47A600D8AA75EB
RID : E8C76117331E78F2AA47A600D8AA75EB
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A68423861503E03006DC26BC779
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 40%-50% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Prod. Ver. : PD2036F_EX_A_6.16.30
Hw. Ver. : PD2036F_EXMA
Build Dt. : Mon Oct 21 18:12:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20241021.181531
Locale : en-US
Patch : 2023-05-01
prd.fprint : vivo/2026/2026:11/RP1A.200720.012/compiler1021181211
prd.os_ver : 11
prd.sec_patch : 2023-05-01
sys.fprint : vivo/2026/2026:11/RP1A.200720.012/compiler1021181211
sys.os_ver : 11
sys.sec_patch : 2023-05-01
vendor.fprint : vivo/2026/2026:11/RP1A.200720.012/compiler1021181211
vendor.os_ver : 11
vendor.sec_patch : 2020-03-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v3.0]
Log Saved : 20260219_110205.log

ayyaz asghar · Feb 22, 2026

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek USB Port (COM79)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&34017522&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 255677D023812E4C85D7F0E096645404
SoC ID[0] : BE64771D5528B73469CD1C6335B3B3C5
SoC ID[1] : 18C0D9863BB4EA3953E13671629F82A5
Running Exploit... Installing Filter... OK Done
Downloading Preloader...OK
PRELOADER : preloader_k62v1_64_bsp.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[INTERNAL] DA Selected!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 15010051583633414209D125D296976B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : C365128CE7620D6469C3323AE5A31B71
RID : C365128CE7620D6469C3323AE5A31B71
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QX63AB
CID : 15010051583633414209D125D296976B
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : LIFE TIME USAGE EXCEED
Life. Est.B : LIFE TIME USAGE EXCEED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1820
Device : PD1818HF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818HF_EX_A_2.0.6
Prod. Name : PD1818HF_EX
Build Dt. : Mon Nov 29 16:27:26 CST 2021
Display ID : O11019 release-keys
Ver. Inc. : 1638174452
Locale : en-US
Patch : 2021-10-01
Bootloader : LOCKED
Erasing Userdata...OK
IMPORTANT : If phone reboots to recovery, simply Format from there.
Operation Finished.
[UltimateMTK2 v3.0]
Log Saved : 20260222_130004.log

ayyaz asghar · Feb 22, 2026

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM78)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&34017522&0&5
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 255677D023812E4C85D7F0E096645404
SoC ID[0] : BE64771D5528B73469CD1C6335B3B3C5
SoC ID[1] : 18C0D9863BB4EA3953E13671629F82A5
Running Exploit...Done
Downloading Preloader...OK
PRELOADER : preloader_k62v1_64_bsp.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[INTERNAL] DA Selected!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 15010051583633414209D125D296976B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : C365128CE7620D6469C3323AE5A31B71
RID : C365128CE7620D6469C3323AE5A31B71
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QX63AB
CID : 15010051583633414209D125D296976B
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : LIFE TIME USAGE EXCEED
Life. Est.B : LIFE TIME USAGE EXCEED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1820
Device : PD1818HF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818HF_EX_A_2.0.6
Prod. Name : PD1818HF_EX
Build Dt. : Mon Nov 29 16:27:26 CST 2021
Display ID : O11019 release-keys
Ver. Inc. : 1638174452
Locale : en-US
Patch : 2021-10-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v3.0]
Log Saved : 20260222_130912.log

GsmToto · Feb 26, 2026

Device : Vivo V15 Pro
Operation : Format FS 2 (Vivo)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1500900 [SM6150] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A53 9670EA259771BA
Initializing Protocol...OK
Using Pre-Defined Loader [V15_Pro.ufl]
Preparing Loader...Done
Sending Loader [V15_Pro]...Done
Executing Loader...OK
Hardware : SM6150, 3V6CMB (eMMC), 128 GB
LU Count : 4 [0x0E8F6000] [0x00002000] [0x00002000] [0x00008000]
Payload Info : [IN: 262144] [ OUT: 1048576] [SafeMode:ON]
Reading Partition Table...OK [61]
Reading Device Information...OK
Software : , eng.compil.20241018.145237 [Fri Oct 18 14:52:37 CST 2024]
Android Ver. : 11
Patch Level : 2021-09-01
Preparing Data...Done
Formatting Userdata......Done
Resetting FRP Lock........Done
Operation Finished.
QcFire Ver. 13.2

GsmToto · Feb 27, 2026

Model : Vivo V20 (PD2039F)
Operation : Erase Userdata
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1901400 [SM6250] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A53 9670EA259771BA
Initializing Protocol...OK
Preparing Loader...Done
Sending Loader [PD2039F]...Done
Executing Loader...OK
Initializing Storage...OK
Read : Protected
Write : Protected
Alt. Write : Allowed
Alt. Write is allowed, using Factory Format Method...Done
Erasing FRP Data...Done
Operation Finished.
QcFire Ver. 13.2

GsmToto · Mar 3, 2026

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:2025][VIVO V4]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM5)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&67fe735&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : 10B5CDEF53E1567EE7790F23F6AABD7A
SoC ID[0] : 552847EE59FF6196567DADD9E01EFEA7
SoC ID[1] : 438292044B03ACD762819F6700DF3289
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
HRID : B9CA40C9AFAFBFB759A627D44EA9A12D
RID : B9CA40C9AFAFBFB759A627D44EA9A12D
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DV6DMB
CID : 150100445636444D4202CD0668C466A1
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1EC00000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD1913F_EX
And. Ver. : 12
Build Dt. : Mon Oct 21 14:44:56 CST 2024
Display ID : SP1A.210812.003 release-keys
Ver. Inc. : compiler10211448
Locale : en-US
Patch : 2022-12-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v3.1]

GsmToto · Mar 8, 2026

Brand/Model : Auto / Auto Detect
Operation : Safe Format
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek USB Port (COM30)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&323149bf&0&3
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6755 [0326] Helio P10/P15/P18
Details : 8A00,CB00,0001
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 84CAFD5831D522A653F867F57FDB0126
Running Exploit...Done
Downloading Preloader...OK
PRELOADER : preloader_tcthz6750_66m5_n1.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[AUTO DA] MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : FULL-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...Failed/Unsupported
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
RID
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : HAG4a2
CID : 90014A484147346132A504D44C5535DF
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x00000003AB400000 [14.68 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Brand : TCL
Manuf. : TCL
Model : handy_T2_EU
Platform : mt6750
Device : HANDYT2
And. Ver. : 7.1.1
Prod. Name : T700X
Build Dt. : Thu Jul 5 19:50:58 HKT 2018
Display ID : N4F26M dev-keys
Ver. Inc. : v9M1T-0
Locale : en-US
Patch : 2018-04-05
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Operation Finished.
[UltimateMTK2 v3.0]
Log Saved : 20260303_164435.log

GsmToto · Mar 17, 2026

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP (2025)
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:PL][NOTHING CMF Phone 1]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM7)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&27edb5fe&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6878 [1375] Dimensity 7300
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : B14AB5FE25A450338B583739794B3C20
SoC ID[0] : F727B451DC06A8A738C6CAC2D165B5BC
SoC ID[1] : FDE6A02596BA15B467855AB55EA5A2AD
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
V6 Protocol Detected!
Reading Hardware Information...OK
EXT_RAM Not Initialized!
Setup Hardware Init...OK
Reading Hardware Information...OK
VERSION : 1.2
RNDM_ID : 3822ecb069fcd764805d0fb3dcc0ed4d
PROD_ID : BYSCCQBY9PAQF6KB
RAM_SIZE : 0x180000000 [6.00 GB]
STORAGE : H9QT0GECN6X145 [UFS]
TYPE : UFS
BLOCK_SIZE : 0x1000
BOOT1 SIZE : 0x0000000000400000 [4.00 MB]
BOOT2 SIZE : 0x0000000000400000 [4.00 MB]
USER SIZE : 0x0000001DCB000000 [119.17 GB]
RPMB SIZE : 0x0000000000000000 [0 bytes]
Sending DA2...Done
SLA : DISABLED
Local SLA (Generic) V1...Failed!
Life-Cycle : OK
RPMB Key : UNKNOWN
Reading Partition Table...OK
dtbo.fprint : Nothing/Tetris/Tetris:14/UP1A.231005.007/2512161717
init_boot.fprint : alps/hal_mgvi_64_64only_ww_armv82/mgvi_64_64only_ww_armv82:14/UP1A.231005.007/2512161717
init_boot.os_ver : 14
init_boot.sec_patch : 2025-06-05
prd.fprint : alps/sys_mssi_64_64only_ww_armv82/mssi_64_64only_ww_armv82:16/BP2A.250605.031.A3/2512161717
prd.os_ver : 16
prd.sec_patch : 2025-12-01
sys.fprint : alps/sys_mssi_64_64only_ww_armv82/mssi_64_64only_ww_armv82:16/BP2A.250605.031.A3/2512161717
sys.os_ver : 16
sys.sec_patch : 2025-12-01
sys_dlkm.fprint : alps/hal_mgvi_64_64only_ww_armv82/mgvi_64_64only_ww_armv82:14/UP1A.231005.007/2512161717
sys_dlkm.os_ver : 14
sys_ext.fprint : alps/sys_mssi_64_64only_ww_armv82/mssi_64_64only_ww_armv82:16/BP2A.250605.031.A3/2512161717
sys_ext.os_ver : 16
sys_ext.sec_patch : 2025-12-01
vendor_boot.fprint : alps/hal_mgvi_64_64only_ww_armv82/mgvi_64_64only_ww_armv82:14/UP1A.231005.007/2512161717
Bootloader : LOCKED
Running FRP Reset (2025)......Done
IMPORTANT : If phone reboots to recovery, simply Format from there.
Operation Finished.
[UltimateMTK2 v3.3]

ayyaz asghar · Sunday at 6:06 PM

Phone Storage: EMMC
SELECTED: A48(L6006)
ACTION: Erase FRP NEW
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM105)
Sending loader, keep boot key untill loader start.
Loader send OK
Changing bautrate OK.
Send Second Loader.
New flash metod detected.

Disk Size: 29.12 GB
Storage: EMMC

Read partition info is supported by loader.
SN: 058663511J001732

CPU NAME: SC9832E
Reading: miscdata
Reading: misc
Reading: l_fixnv1
Reading: l_fixnv2
Reading: splloader
Found [persist] [persist] Size to download: 2 MB
Reading: persist
Backup saved to: C:\UMT\unisoc_module\spreadtrum_module_backup_folder\flashmode_security_backup\SC9832E_058663511J001732___security_backup.tar
Removing frp, wait...
[1]FRP: persist
Done.
Found [metadata] [metadata] Size to download: 16 MB
[metadata]Format OK.
[cache]Format OK.
[userdata]Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: UMT Unisoc Module 1.7
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\_erase_frp_new_41.txt
Total Time: 00:00:27
Done.

ayyaz asghar · Sunday at 6:09 PM

SELECTED: P65
ACTION: Erase FRP NEW
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM97)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 7439C3 [5e] 10250298
UID: M3W384_20_5_24
Bootable A/B Slot: _b

Disk Size: 119.17 GB
Storage: UFS

Read partition info is supported by loader.
SN: 124801549M004273

CPU NAME: T612
Reading: miscdata
Reading: misc
Saving bootloader control block
Reading: l_fixnv1_b
Reading: l_fixnv2_b
Reading: splloader
Found [persist] [persist] Size to download: 2 MB
Reading: persist
Backup saved to: C:\UMT\unisoc_module\spreadtrum_module_backup_folder\flashmode_security_backup\T612_124801549M004273___security_backup.tar
Removing frp, wait...
[1]FRP: persist
Done.
Found [metadata] [metadata] Size to download: 64 MB
[metadata]Format OK.
[cache]Format OK.
[userdata]Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: UMT Unisoc Module 1.7
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\_erase_frp_new_40.txt
Total Time: 00:00:49
Done.

ayyaz asghar · Sunday at 6:12 PM

SELECTED: Smart 6(X6511B)
ACTION: Erase FRP NEW
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM105)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 4C4D04 [5e] 9166E0
UID: C4d40B_5_77_96
Bootable A/B Slot: _b

Disk Size: 29.12 GB
Storage: EMMC

Read partition info is supported by loader.
SN: 07472371BH002799

CPU NAME: SC9863A
Reading: miscdata
Reading: misc
Saving bootloader control block
Reading: l_fixnv1_b
Reading: l_fixnv2_b
Reading: splloader
Found [persist] [persist] Size to download: 2 MB
Reading: persist
Backup saved to: C:\UMT\unisoc_module\spreadtrum_module_backup_folder\flashmode_security_backup\SC9863A_07472371BH002799___security_backup.tar
Removing frp, wait...
[1]FRP: persist
Done.
Found [metadata] [metadata] Size to download: 16 MB
[metadata]Format OK.
[cache]Format OK.
[userdata]Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: UMT Unisoc Module 1.5
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\_erase_frp_new_29.txt
Total Time: 00:00:58
Done.

Action: Reset Phone.
Detected: SPRD U2S Diag (COM89)
Port open ok.
Using connection mode 1
Detected: SPRD U2S Diag (COM89)

Platform Version: MOCORTM_22A_W22.39.1_P7_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_22A_W22.39.1_P7
HW Version: sc9863A_modem
11-14-2022 15:09:09
Build number: A631L-SR368-12.0-GL-V070-20241105
EMMC DDR SIZE :30.00 GB+2.00 GB
UID: fc4ba2c320db72c96bc0168a4f8649aeade5cf29dc55d6472adcec243b2e7bdf
AT UID: W+SPGETUID: e7782c3b7d77ff5680ed642625202c726417d634cfc01244e78a21c0878fa57f

IMEI 1: 359806370391689
IMEI 2: 359806370391697
IMEI 3: 867400020316638
IMEI 4: 867400020316646
DONE
DONE
DONE
DONE
Done.
Exe version: UMT Unisoc Module 1.7
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\A631L-SR368-12_0-GL-V070-20241105_359806370391689_diag_reset_ph

Search

Search

UMT ★★★ Post All Successfully Repaired Phones Ultimate Multi Tool ★★★

GsmToto

GsmToto

ayyaz asghar

Active Member

ayyaz asghar

Active Member

ayyaz asghar

Active Member

GsmToto

GsmToto

GsmToto

GsmToto

GsmToto

ayyaz asghar

Active Member

ayyaz asghar

Active Member

ayyaz asghar

Active Member