★★★ Successfully Unlocked / Repaired / Flashed Phones by UnlockTool PLEASE POST HERE ★★★

[GsmToto]

ERASE FRP Selected Platform : Tiger T612_64_2_Bypass
Connect Testpoint or hold VOL DOWN! Instruction here!
Waiting for device... COM5 (SPRD U2S Diag)
USB : USB\VID_1782&PID_4D00\5&28062471&0&3
Initializing loader... OK
Protocol : SPRD3
Sending payload... OK
Sending auth data... OK
Sending preloader1... OK
Sending preloader2... OK
Booting loader, please wait... OK
Boot ver: Spreadtrum Boot Block version 1.1
Sending FDL1... OK
Sending FDL2... OK
Reading Serial Number... N.A
Reading partitions info... OK [74] [8192]
Dual boot-slot : A
Reading device info... SKIP [EROFS]
Erasing FRP... OK
UNLOCKTOOL 2025.05.10.0
Elapsed time : 1 minute 8 seconds

 

[GsmToto]

[SPRD] ERASE FRP Selected Platform : SC9863A_64_Bypass
Connect Testpoint or hold VOL DOWN! Instruction here!
Waiting for device... COM4 (SPRD U2S Diag)
USB : USB\VID_1782&PID_4D00\5&28062471&0&3
Initializing loader... OK
Protocol : SPRD3
Sending payload... OK
Sending auth data... OK
Sending preloader1... OK
Sending preloader2... OK
Booting loader, please wait... OK
Boot ver: Spreadtrum Boot Block version 1.1
Sending FDL1... OK
Sending FDL2... OK
Reading Serial Number... N.A
Reading partitions info... OK [77] [1024]
Dual boot-slot : B
Reading device info... SKIP [EROFS]
Erasing FRP... OK
UNLOCKTOOL 2025.05.10.0
Elapsed time : 1 minute 6 second

 

[GsmTube_YT]

Honor X6 FRP Bypass (VNE-LX1/LX2/LX3) | Android 14 Unlock with UnlockTool

 

[GsmToto]

[SPRD] FACTORY RESET Selected Platform : SC9863A_64_Bypass
Connect Testpoint or hold VOL DOWN! Instruction here!
Waiting for device... COM63 (SPRD U2S Diag)
USB : USB\VID_1782&PID_4D00\5&C99FFEC&0&3
Initializing loader... OK
Protocol : SPRD3
Sending payload... OK
Sending auth data... OK
Sending preloader1... OK
Sending preloader2... OK
Booting loader, please wait... OK
Boot ver: Spreadtrum Boot Block version 1.1
Sending FDL1... OK
Sending FDL2... OK
Reading Serial Number... 2269A02928312030
Reading partitions info... OK [74] [1024]
Dual boot-slot : B
Reading device info... SKIP [EROFS]
Erasing FRP (persist)... OK
Erasing USERDATA... OK
UNLOCKTOOL 2025.05.20.0
Elapsed time : 48 seconds

 

[GsmToto]

Model: iPhone 12 Pro
Device Name: iPhone
Mode: CLEAN
Status: Offline
Status Code: 500

========================
Tips : Now check your device FMI state before perform a restoration!
UNLOCKTOOL 2025.05.26.0
Elapsed time : 3 minutes 6 seconds

 

[GsmToto]

[USB 1.0] ERASE FRP Scanning port... COM3
Connecting to port... OK
Connection : USB 1.0 Full-Speed
USB Driver : [HUAWEI Incorporated] HSPL_usbvcom
Selected Model : HiSilicon kirin 950
Code Name : Hi950
Operation : Kirin Testpoint [1]
Authenticating... OK
Retrieving server data... OK [1,26 MiB]
Platform : HiSilicon Kirin 950
Writing sec_usb_xloader... OK 0,647s
Writing sec_usb_fastboot... OK 22,656s
Waiting for fastboot... OK
Product Model : FRD-L09
Erasing FRP... OK

UNLOCKTOOL 2025.05.26.0
Elapsed time : 49 seconds

 

[iph0ne7]

SM-A025G U8

[EDL] ERASE FRP​

Waiting for HS-USB QDLoader 9008... COM35
Selected Model : Samsung A02s (BIT 7)
Code Name : SM-A025G | SM-A025G/DS(BIT7)
Operation : Erase FRP [1]
Authenticating... OK
Retrieving server data... OK [234.69 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM35
Connecting to device... OK
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:4096] [Host:1048576]
Reading partition map... OK - LU Count : 1
Reading software info... OK [super]
Model Name : SM-A025G
Product Name : a02qnaxx
Manufacturer : samsung
Platform : QC_Reference_Phone
Android Version : 12
Security Patch : 2024-08-01
Build ID : SP1A.210812.016.A025GXXS8CXH1
Build : A025GXXS8CXH1
Build Date : Thu Aug 22 10:45:23 KST 2024
Code Name : SM-A025G
PDA : A025GXXS8CXH1
Erasing FRP... OK
Rebooting... OK

---

UNLOCKTOOL 2025.06.01.0
Elapsed time : 13 minutes 22 seconds

 

[perata]

Remove FRP SAMSUNG A057F U4

[EDL] FACTORY RESET Waiting for HS-USB QDLoader 9008... COM50
Selected Model : Samsung A05s (BIT 9)
Code Name : SM-A057F/SM-A057F/DS (BIT9)
Operation : Factory Reset [1]
Authenticating... OK
Retrieving server data... OK [267,33 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM50
Connecting to device... OK
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : UFS [Sector:4096] [Target:0] [Host:1048576]
Reading partition map... OK - LU Count : 6
Reading software info... OK [super]
Model Name : SM-A057F_SEA_XXV_QKEY0
Manufacturer : SAMSUNG
Build ID : A057FXXU4CXF3
Erasing FRP... OK
Erasing USERDATA... OK
Rebooting... OK

UNLOCKTOOL

 

[perata]

Remove frp honor VNE-LX1


[PRELOADER] ERASE FRP Selected auth : CUSTOM DA
Retrieving server data... OK [339,75 KiB]
Phone must have battery inside!
Waiting for device... COM51 [PRELOADER:0E8D:2000]
Handshaking... OK
Reading hardware info... OK
Hardware : MT6765 [Helio G25|G35|P35] 0766 8A00 CA00 0000
Security Config : SCB SLA DAA
MEID : 1303AC591F275F5943AAB7F5143212FA
Custom DA(e) : Huawei_Honor_MT6765_DA
Sending Download-Agent... OK
Syncing with target... OK
Booting device (preloader auth)... OK
Syncing with DA... OK
Storage : EMMC - CID : 474E0113.31324D32.952E1031.B97A49F1
Vendor : Micron - Name : G2M211 - Serial : 1240569134 - Rev : 16
Boot1 : 4 MiB - Boot2 : 4 MiB - RPMB : 16 MiB - User Area : 58,24 GiB
Reading partition info... OK [95]
Reading device info... OK [super]
Model Name : VNE-LX1
Manufacturer : HUAWEI
OEM Model : VNE-L41CM
OEM Vendor : opr/eea
EMUI Version : VNE-L41CM 6.1.0.210(C430E12R1P2)
Connecting to device... OK
Erasing FRP... OK

UNLOCKTOOL 2025.06.01.0
Elapsed time : 28 seconds

 

[hunnyck]

Reset done


[EDL] FACTORY RESET Waiting for HS-USB QDLoader 9008... COM18
Selected Model : Xiaomi Redmi 9T / Redmi 9 / Redmi 9 Power
Code Name : (lime)
Operation : Factory Reset [1]
Authenticating... OK
Retrieving server data... OK [270.92 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM18
Connecting to device... OK
Handshaking... OK
Reading bootloader info... OK
Serial : 997216768 SoC : [Snapdragon 662] [SM6115] [0x0014D0E1]
OEM : Xiaomi [0x0072] Model : Unknown [0x0000]
PK_HASH[0] : 1BEBE3863A6781DB4B01086063007334
PK_HASH[1] : DE9E5CA14971C7C4F4358EC9D79CDA46
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : UFS [Sector:4096] [Target:0] [Host:1048576]
Reading partition map... OK - LU Count : 6
Reading software info... OK [super]
Model Name : Lime for arm64
Product Name : lime
Manufacturer : Xiaomi
Platform : lime
Android Version : 10
Security Patch : 2021-01-01
Build ID : Android-Q-build-20210205203737
Build : V12.0.6.0.QJQINXM
Build Date : Fri Feb 5 22:41:03 CST 2021
MIUI Version : V12
MIUI Build : V12.0.6.0.QJQINXM
MIUI Region : in
MIUI Locale : en-GB
Erasing FRP... OK
Erasing USERDATA... OK
Rebooting... OK
UNLOCKTOOL 2025.06.22.0
Elapsed time : 18 seconds

 

[hunnyck]

[BROM] ERASE FRP
Selected Model : Tecno IN2
Code Name : H391
Operation : Erase FRP [10]
Authenticating... OK
Retrieving server data... OK [3.71 MiB]
Phone must have battery inside!
Waiting for device... COM31 [BOOTROM:0E8D:0003]
Initializing usb... OK
Waiting for device... COM31 [BOOTROM:0E8D:0003]
Bypassing authentication... OK
Analyzing... preloader_in2_h391.bin [MT6739:2:488] [Internal]
Handshaking... OK
Reading hardware info... OK
Hardware : MT6739 0699 8A00 CB00 0002
Security Config : SCB SLA DAA
MEID : ECFDA23CF768F6BF1359DE43C60001FC
Sending Download-Agent [1]... OK
Syncing with device... OK
Booting device... OK
Syncing with DA... OK
Storage : EMMC - CID : 51000115.4D333645.50CE0342.1454E9B
Vendor : Samsung - Name : QE63MB - Serial : 1318801614 - Rev : 3
Boot1 : 4 MiB - Boot2 : 4 MiB - RPMB : 4 MiB - User Area : 14.56 GiB
Reading partition info... OK [35]
Connecting to device... OK
Erasing FRP... OK
UNLOCKTOOL 2025.06.22.0
Elapsed time : 27 seconds

 

[hunnyck]

Oppo A57 Reset Done


[PRELOADER] FACTORY RESET + FRP Selected auth : OPPO/REALME/ONEPLUS [1]
Phone must have battery inside!
Waiting for device... COM20 [PRELOADER:0E8D:2000]
Handshaking... OK
Reading hardware info... OK
Hardware : MT6765 [Helio G25|G35|P35] 0766 8A00 CA00 0000
Security Config : SCB DAA
MEID : 714AE02B465EB6A00567ACD64DE81D80
Sending Download-Agent... OK
Syncing with target... OK
Booting device (preloader auth)... OK
Bypassing auth... OK
Syncing with DA... OK
Storage : EMMC - CID : 5900019B.36305032.2E8D0034.DD892A4F
Vendor : Samsung - Name : Y2P064 - Serial : 709832333 - Rev : 0
Boot1 : 4 MiB - Boot2 : 4 MiB - RPMB : 16 MiB - User Area : 58.24 GiB
Reading partition info... OK [55]
Connecting to device... OK
Erasing FRP... OK
Erasing USERDATA (quick format)... OK
UNLOCKTOOL 2025.06.23.0
Elapsed time : 8 seconds

 

[GsmToto]

[EDL] ERASE FRP
Waiting for HS-USB QDLoader 9008... COM17
Selected Model : Samsung S23 (BIT 7)
Code Name : SM-S911B | SM-S911B/DS (BIT7)
Operation : Erase FRP [1]
Authenticating... OK
Retrieving server data... OK [788,01 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM3
Connecting to device... OK
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : UFS [Sector:4096] [Target:0] [Host:1048576]
Reading partition map... OK - LU Count : 6
Reading software info... OK [super]
Model Name : SM-S911B_EUR_XX_QKEY1
Manufacturer : SAMSUNG
Build ID : S911BXXU7CXK4
Erasing FRP... OK
Rebooting... OK
UNLOCKTOOL 2025.06.19.0
Elapsed time : 29 seconds

 

[GsmToto]

[EDL] FACTORY RESET Waiting for HS-USB QDLoader 9008... COM3
Selected Model : Oppo A3 / A3X
Code Name : CPH2641/ CPH2669
Operation : Factory Reset [4]
Authenticating... OK
Retrieving server data... OK [273.62 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM3
Connecting to device... OK
Handshaking... OK
Reading bootloader info... OK
Serial : ZZZZZZZSoC : [Snapdragon 662] [SM6115] [ZZZZ]
OEM : Oppo/Realme/Oneplus [0x0051] Model : Unknown [0x0000]
PK_HASH[0] : ZZZZZZZZZZZZZZZZZZ
PK_HASH[1] : ZZZZZZZZZZZZZ
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:0] [Host:1048576]
Erasing FRP... OK
Erasing USERDATA... OK
Rebooting... OK

UNLOCKTOOL 2025.06.28.0
Elapsed time : 52 seconds

 

[GsmToto]

[EDL] FACTORY RESET Waiting for HS-USB QDLoader 9008... COM3
Selected Model : Oppo A3 / A3X
Code Name : CPH2641/ CPH2669
Operation : Factory Reset [4]
Authenticating... OK
Retrieving server data... OK [273.62 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM3
Connecting to device... OK
Handshaking... OK
Reading bootloader info... OK
Serial : ZZZZZZZSoC : [Snapdragon 662] [SM6115] [ZZZZ]
OEM : Oppo/Realme/Oneplus [0x0051] Model : Unknown [0x0000]
PK_HASH[0] : ZZZZZZZZZZZZZZZZZZ
PK_HASH[1] : ZZZZZZZZZZZZZ
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:0] [Host:1048576]
Erasing FRP... OK
Erasing USERDATA... OK
Rebooting... OK

UNLOCKTOOL 2025.06.28.0
Elapsed time : 52 seconds