★★★ Successfully Unlocked / Repaired / Flashed Phones by UnlockTool PLEASE POST HERE ★★★

[GsmToto]

ERASE FRP Selected Platform : Tiger T612_64_2_Bypass
Connect Testpoint or hold VOL DOWN! Instruction here!
Waiting for device... COM5 (SPRD U2S Diag)
USB : USB\VID_1782&PID_4D00\5&28062471&0&3
Initializing loader... OK
Protocol : SPRD3
Sending payload... OK
Sending auth data... OK
Sending preloader1... OK
Sending preloader2... OK
Booting loader, please wait... OK
Boot ver: Spreadtrum Boot Block version 1.1
Sending FDL1... OK
Sending FDL2... OK
Reading Serial Number... N.A
Reading partitions info... OK [74] [8192]
Dual boot-slot : A
Reading device info... SKIP [EROFS]
Erasing FRP... OK
UNLOCKTOOL 2025.05.10.0
Elapsed time : 1 minute 8 seconds

 

[GsmToto]

[SPRD] ERASE FRP Selected Platform : SC9863A_64_Bypass
Connect Testpoint or hold VOL DOWN! Instruction here!
Waiting for device... COM4 (SPRD U2S Diag)
USB : USB\VID_1782&PID_4D00\5&28062471&0&3
Initializing loader... OK
Protocol : SPRD3
Sending payload... OK
Sending auth data... OK
Sending preloader1... OK
Sending preloader2... OK
Booting loader, please wait... OK
Boot ver: Spreadtrum Boot Block version 1.1
Sending FDL1... OK
Sending FDL2... OK
Reading Serial Number... N.A
Reading partitions info... OK [77] [1024]
Dual boot-slot : B
Reading device info... SKIP [EROFS]
Erasing FRP... OK
UNLOCKTOOL 2025.05.10.0
Elapsed time : 1 minute 6 second

 

[GsmTube_YT]

Honor X6 FRP Bypass (VNE-LX1/LX2/LX3) | Android 14 Unlock with UnlockTool

 

[GsmToto]

[SPRD] FACTORY RESET Selected Platform : SC9863A_64_Bypass
Connect Testpoint or hold VOL DOWN! Instruction here!
Waiting for device... COM63 (SPRD U2S Diag)
USB : USB\VID_1782&PID_4D00\5&C99FFEC&0&3
Initializing loader... OK
Protocol : SPRD3
Sending payload... OK
Sending auth data... OK
Sending preloader1... OK
Sending preloader2... OK
Booting loader, please wait... OK
Boot ver: Spreadtrum Boot Block version 1.1
Sending FDL1... OK
Sending FDL2... OK
Reading Serial Number... 2269A02928312030
Reading partitions info... OK [74] [1024]
Dual boot-slot : B
Reading device info... SKIP [EROFS]
Erasing FRP (persist)... OK
Erasing USERDATA... OK
UNLOCKTOOL 2025.05.20.0
Elapsed time : 48 seconds

 

[GsmToto]

Model: iPhone 12 Pro
Device Name: iPhone
Mode: CLEAN
Status: Offline
Status Code: 500

========================
Tips : Now check your device FMI state before perform a restoration!
UNLOCKTOOL 2025.05.26.0
Elapsed time : 3 minutes 6 seconds

 

[GsmToto]

[USB 1.0] ERASE FRP Scanning port... COM3
Connecting to port... OK
Connection : USB 1.0 Full-Speed
USB Driver : [HUAWEI Incorporated] HSPL_usbvcom
Selected Model : HiSilicon kirin 950
Code Name : Hi950
Operation : Kirin Testpoint [1]
Authenticating... OK
Retrieving server data... OK [1,26 MiB]
Platform : HiSilicon Kirin 950
Writing sec_usb_xloader... OK 0,647s
Writing sec_usb_fastboot... OK 22,656s
Waiting for fastboot... OK
Product Model : FRD-L09
Erasing FRP... OK

UNLOCKTOOL 2025.05.26.0
Elapsed time : 49 seconds

 

[iph0ne7]

SM-A025G U8

[EDL] ERASE FRP​

Waiting for HS-USB QDLoader 9008... COM35
Selected Model : Samsung A02s (BIT 7)
Code Name : SM-A025G | SM-A025G/DS(BIT7)
Operation : Erase FRP [1]
Authenticating... OK
Retrieving server data... OK [234.69 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM35
Connecting to device... OK
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:4096] [Host:1048576]
Reading partition map... OK - LU Count : 1
Reading software info... OK [super]
Model Name : SM-A025G
Product Name : a02qnaxx
Manufacturer : samsung
Platform : QC_Reference_Phone
Android Version : 12
Security Patch : 2024-08-01
Build ID : SP1A.210812.016.A025GXXS8CXH1
Build : A025GXXS8CXH1
Build Date : Thu Aug 22 10:45:23 KST 2024
Code Name : SM-A025G
PDA : A025GXXS8CXH1
Erasing FRP... OK
Rebooting... OK

---

UNLOCKTOOL 2025.06.01.0
Elapsed time : 13 minutes 22 seconds

 

[perata]

Remove FRP SAMSUNG A057F U4

[EDL] FACTORY RESET Waiting for HS-USB QDLoader 9008... COM50
Selected Model : Samsung A05s (BIT 9)
Code Name : SM-A057F/SM-A057F/DS (BIT9)
Operation : Factory Reset [1]
Authenticating... OK
Retrieving server data... OK [267,33 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM50
Connecting to device... OK
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : UFS [Sector:4096] [Target:0] [Host:1048576]
Reading partition map... OK - LU Count : 6
Reading software info... OK [super]
Model Name : SM-A057F_SEA_XXV_QKEY0
Manufacturer : SAMSUNG
Build ID : A057FXXU4CXF3
Erasing FRP... OK
Erasing USERDATA... OK
Rebooting... OK

UNLOCKTOOL

 

[perata]

Remove frp honor VNE-LX1


[PRELOADER] ERASE FRP Selected auth : CUSTOM DA
Retrieving server data... OK [339,75 KiB]
Phone must have battery inside!
Waiting for device... COM51 [PRELOADER:0E8D:2000]
Handshaking... OK
Reading hardware info... OK
Hardware : MT6765 [Helio G25|G35|P35] 0766 8A00 CA00 0000
Security Config : SCB SLA DAA
MEID : 1303AC591F275F5943AAB7F5143212FA
Custom DA(e) : Huawei_Honor_MT6765_DA
Sending Download-Agent... OK
Syncing with target... OK
Booting device (preloader auth)... OK
Syncing with DA... OK
Storage : EMMC - CID : 474E0113.31324D32.952E1031.B97A49F1
Vendor : Micron - Name : G2M211 - Serial : 1240569134 - Rev : 16
Boot1 : 4 MiB - Boot2 : 4 MiB - RPMB : 16 MiB - User Area : 58,24 GiB
Reading partition info... OK [95]
Reading device info... OK [super]
Model Name : VNE-LX1
Manufacturer : HUAWEI
OEM Model : VNE-L41CM
OEM Vendor : opr/eea
EMUI Version : VNE-L41CM 6.1.0.210(C430E12R1P2)
Connecting to device... OK
Erasing FRP... OK

UNLOCKTOOL 2025.06.01.0
Elapsed time : 28 seconds

 

[hunnyck]

Reset done


[EDL] FACTORY RESET Waiting for HS-USB QDLoader 9008... COM18
Selected Model : Xiaomi Redmi 9T / Redmi 9 / Redmi 9 Power
Code Name : (lime)
Operation : Factory Reset [1]
Authenticating... OK
Retrieving server data... OK [270.92 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM18
Connecting to device... OK
Handshaking... OK
Reading bootloader info... OK
Serial : 997216768 SoC : [Snapdragon 662] [SM6115] [0x0014D0E1]
OEM : Xiaomi [0x0072] Model : Unknown [0x0000]
PK_HASH[0] : 1BEBE3863A6781DB4B01086063007334
PK_HASH[1] : DE9E5CA14971C7C4F4358EC9D79CDA46
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : UFS [Sector:4096] [Target:0] [Host:1048576]
Reading partition map... OK - LU Count : 6
Reading software info... OK [super]
Model Name : Lime for arm64
Product Name : lime
Manufacturer : Xiaomi
Platform : lime
Android Version : 10
Security Patch : 2021-01-01
Build ID : Android-Q-build-20210205203737
Build : V12.0.6.0.QJQINXM
Build Date : Fri Feb 5 22:41:03 CST 2021
MIUI Version : V12
MIUI Build : V12.0.6.0.QJQINXM
MIUI Region : in
MIUI Locale : en-GB
Erasing FRP... OK
Erasing USERDATA... OK
Rebooting... OK
UNLOCKTOOL 2025.06.22.0
Elapsed time : 18 seconds

 

[hunnyck]

[BROM] ERASE FRP
Selected Model : Tecno IN2
Code Name : H391
Operation : Erase FRP [10]
Authenticating... OK
Retrieving server data... OK [3.71 MiB]
Phone must have battery inside!
Waiting for device... COM31 [BOOTROM:0E8D:0003]
Initializing usb... OK
Waiting for device... COM31 [BOOTROM:0E8D:0003]
Bypassing authentication... OK
Analyzing... preloader_in2_h391.bin [MT6739:2:488] [Internal]
Handshaking... OK
Reading hardware info... OK
Hardware : MT6739 0699 8A00 CB00 0002
Security Config : SCB SLA DAA
MEID : ECFDA23CF768F6BF1359DE43C60001FC
Sending Download-Agent [1]... OK
Syncing with device... OK
Booting device... OK
Syncing with DA... OK
Storage : EMMC - CID : 51000115.4D333645.50CE0342.1454E9B
Vendor : Samsung - Name : QE63MB - Serial : 1318801614 - Rev : 3
Boot1 : 4 MiB - Boot2 : 4 MiB - RPMB : 4 MiB - User Area : 14.56 GiB
Reading partition info... OK [35]
Connecting to device... OK
Erasing FRP... OK
UNLOCKTOOL 2025.06.22.0
Elapsed time : 27 seconds

 

[hunnyck]

Oppo A57 Reset Done


[PRELOADER] FACTORY RESET + FRP Selected auth : OPPO/REALME/ONEPLUS [1]
Phone must have battery inside!
Waiting for device... COM20 [PRELOADER:0E8D:2000]
Handshaking... OK
Reading hardware info... OK
Hardware : MT6765 [Helio G25|G35|P35] 0766 8A00 CA00 0000
Security Config : SCB DAA
MEID : 714AE02B465EB6A00567ACD64DE81D80
Sending Download-Agent... OK
Syncing with target... OK
Booting device (preloader auth)... OK
Bypassing auth... OK
Syncing with DA... OK
Storage : EMMC - CID : 5900019B.36305032.2E8D0034.DD892A4F
Vendor : Samsung - Name : Y2P064 - Serial : 709832333 - Rev : 0
Boot1 : 4 MiB - Boot2 : 4 MiB - RPMB : 16 MiB - User Area : 58.24 GiB
Reading partition info... OK [55]
Connecting to device... OK
Erasing FRP... OK
Erasing USERDATA (quick format)... OK
UNLOCKTOOL 2025.06.23.0
Elapsed time : 8 seconds

 

[GsmToto]

[EDL] ERASE FRP
Waiting for HS-USB QDLoader 9008... COM17
Selected Model : Samsung S23 (BIT 7)
Code Name : SM-S911B | SM-S911B/DS (BIT7)
Operation : Erase FRP [1]
Authenticating... OK
Retrieving server data... OK [788,01 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM3
Connecting to device... OK
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : UFS [Sector:4096] [Target:0] [Host:1048576]
Reading partition map... OK - LU Count : 6
Reading software info... OK [super]
Model Name : SM-S911B_EUR_XX_QKEY1
Manufacturer : SAMSUNG
Build ID : S911BXXU7CXK4
Erasing FRP... OK
Rebooting... OK
UNLOCKTOOL 2025.06.19.0
Elapsed time : 29 seconds

 

[GsmToto]

[EDL] FACTORY RESET Waiting for HS-USB QDLoader 9008... COM3
Selected Model : Oppo A3 / A3X
Code Name : CPH2641/ CPH2669
Operation : Factory Reset [4]
Authenticating... OK
Retrieving server data... OK [273.62 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM3
Connecting to device... OK
Handshaking... OK
Reading bootloader info... OK
Serial : ZZZZZZZSoC : [Snapdragon 662] [SM6115] [ZZZZ]
OEM : Oppo/Realme/Oneplus [0x0051] Model : Unknown [0x0000]
PK_HASH[0] : ZZZZZZZZZZZZZZZZZZ
PK_HASH[1] : ZZZZZZZZZZZZZ
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:0] [Host:1048576]
Erasing FRP... OK
Erasing USERDATA... OK
Rebooting... OK

UNLOCKTOOL 2025.06.28.0
Elapsed time : 52 seconds

 

[GsmToto]

[EDL] FACTORY RESET Waiting for HS-USB QDLoader 9008... COM3
Selected Model : Oppo A3 / A3X
Code Name : CPH2641/ CPH2669
Operation : Factory Reset [4]
Authenticating... OK
Retrieving server data... OK [273.62 KiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM3
Connecting to device... OK
Handshaking... OK
Reading bootloader info... OK
Serial : ZZZZZZZSoC : [Snapdragon 662] [SM6115] [ZZZZ]
OEM : Oppo/Realme/Oneplus [0x0051] Model : Unknown [0x0000]
PK_HASH[0] : ZZZZZZZZZZZZZZZZZZ
PK_HASH[1] : ZZZZZZZZZZZZZ
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:0] [Host:1048576]
Erasing FRP... OK
Erasing USERDATA... OK
Rebooting... OK

UNLOCKTOOL 2025.06.28.0
Elapsed time : 52 seconds

 

[hunnyck]

vivo Y02 FRP Reset Done

[PRELOADER] ERASE FRP Selected auth : CUSTOM DA
Retrieving server data... OK [346.44 KiB]
Phone must have battery inside!
Waiting for device... COM13 [PRELOADER:0E8D:2000]
Handshaking... OK
Reading hardware info... OK
Hardware : MT6765 [Helio G25|G35|P35] 0766 8A00 CA00 0000
Security Config : SCB DAA
MEID : 97816E065624DC73795FDE7EA1625683
Custom DA(e) : Vivo_MT6765_Security_2025
Sending Download-Agent... OK
Syncing with target... OK
Booting device (preloader auth)... OK
Syncing with DA... OK
Storage : EMMC - CID : 5900019B.33305032.91730032.95991459
Vendor : Samsung - Name : Y2P032 - Serial : 341414259 - Rev : 0
Boot1 : 4 MiB - Boot2 : 4 MiB - RPMB : 16 MiB - User Area : 29.12 GiB
Reading partition info... OK [53]
Reading device info... OK [super]
Model Name : V2236
Manufacturer : vivo
Platform : k65v1_32_bsp_2g_ago
Android Version : 12
Security Patch : 2024-12-01
Build ID : PD2236DF_EX_A_12.0.22.0.W30.V000L1
Build : compiler12111131
Build Date : Wed Dec 11 11:41:42 CST 2024
Vivo Model : PD2236DF_EXMA
Vivo Version : PD2236DF_EX_A_12.0.22.0.W30
OS Name : vos
OS Version : 3.0
OS Build : Funtouch OS 12 Global
Connecting to device... OK
Erasing FRP... OK
UNLOCKTOOL 2025.06.28.0
Elapsed time : 21 seconds

 

[hunnyck]

SM-A166P u4 ad ver 15 use TP by Done


[PRELOADER] ERASE FRP Selected auth : CUSTOM DA
Retrieving server data... OK [384.11 KiB]
Phone must have battery inside!
Waiting for device... COM14 [BOOTROM:0E8D:0003]
Initializing usb... OK
Waiting for device... COM14 [BOOTROM:0E8D:0003]
Reading hardware info... OK
Hardware : MT6835 [Dimensity 6100+] 1209 8A00 CB00 0000
Security Config : SCB DAA
MEID : 93966EEFF8D7D643144F37E21700987D
Custom DA(e) : Samsung_A166P_MT6835_BIT3
Sending Download-Agent... OK
Syncing with target... OK
Booting device (brom auth)... OK
Authenticating SLA... OK
Syncing with DA... OK
Storage : UFS - CID : 4B4D384C393030314A412D423632340000000000
UFS: LU0 Size : 4 MiB - LU1 Size : 4 MiB - LU2 Size : 119.17 GiB
Reading partition info... OK [61]
Reading device info... OK [super]
Model Name : SM-A166P_SEA_XME_MKEY8
Manufacturer : SAMSUNG
Build ID : A166PXXU4BYE6
Connecting to device... OK
Erasing FRP... OK
UNLOCKTOOL 2025.06.28.0
Elapsed time : 32 seconds

 

[hunnyck]

OPPO A16k FRP Reset Done

[PRELOADER] ERASE FRP Selected auth : OPPO/REALME/ONEPLUS [1]
Phone must have battery inside!
Waiting for device... COM8 [PRELOADER:0E8D:2000]
Handshaking... OK
Reading hardware info... OK
Hardware : MT6765 [Helio G25|G35|P35] 0766 8A00 CA00 0000
Security Config : SCB DAA
MEID : DDA383C5D0BAB8F4561E0441ABFC3F88
Sending Download-Agent... OK
Syncing with target... OK
Booting device (preloader auth)... OK
Bypassing auth... OK
Syncing with DA... OK
Storage : EMMC - CID : 684A0190.50613842.7D00033E.E5B876C2
Vendor : SK Hynix - Name : hB8aP> - Serial : 1992457472 - Rev : 3
Boot1 : 4 MiB - Boot2 : 4 MiB - RPMB : 16 MiB - User Area : 29.12 GiB
Reading partition info... OK [48]
Connecting to device... OK
Erasing FRP... OK
UNLOCKTOOL 2025.06.28.0
Elapsed time : 15 seconds

 

[hunnyck]

Mi Note 5pro Password Reset +FRP + Mi acc Disable Done

[EDL] RESET | DISABLE MI CLOUD Waiting for HS-USB QDLoader 9008... COM5
Selected Model : Xiaomi Redmi Note 5 | 5 Pro
Code Name : Whyred
Operation : Reset MiCloud [2]
Authenticating... OK
Retrieving server data... OK [8.86 MiB]
Initializing data... OK
Waiting for HS-USB QDLoader 9008... COM5
Connecting to device... OK
Handshaking... OK
Reading bootloader info... OK
Serial : 3189648719 SoC : [Snapdragon 636] [SDM636] [0x000CC0E1]
OEM : Qualcomm [0x0000] Model : Unknown [0x0000]
PK_HASH[0] : A7B8B82545A98ECA23D6E9105FB46456
PK_HASH[1] : 8D1B5828264903441BDEF0CD57E3C370
Writing flash programmer... OK
Connecting to flash programmer... OK
Configuring device... OK
Firehose config : eMMC [Sector:512] [Target:4096] [Host:1048576]
Reading partition map... OK - LU Count : 1
Reading software info... OK [system]
Model Name : Redmi Note 5
Product Name : whyred
Manufacturer : Xiaomi
Platform : sdm636
Android Version : 9
Security Patch : 2019-11-05
Build ID : PKQ1.180904.001
Build Date : Fri Nov 8 00:14:51 WIB 2019
MIUI Version : V11
MIUI Build : V11.0.3.0.PEIMIXM
MIUI Region : global
MIUI Locale : en-GB
Erasing lock data... OK
Erasing USERDATA... OK
Disabling MiCloud... OK
Erasing FRP... OK
Rebooting... OK
UNLOCKTOOL 2025.06.28.0
Elapsed time : 56 seconds