If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here

[diamondmobile]

ufi box when i connect any adapter box disconnect

 

[Pingol]

Hi, I'm a new user to ufi box. my ufi box won't detect my first phone i tried Samsung A10s to erase frp by pin outs. This is the message it shows

 

[Pingol]

Hi, I'm a new user to ufi box. my ufi box won't detect my first phone i tried Samsung A10s to erase frp by pin outs. This is the message it shows

When I remove the piouts and connect the motherboard the phone is working normally. What could be the problem?

 

[abu14]

This new version update after emmc read write speed slow old version speed 10mbps

New version 3to 5 Mbps pls solve this speed problem

I not using new version old version using this time solve after use latest version

 

[Jane1]

When I starting UFIbox I receive the error
[314] Failed to initialize critical task, reason: Forbidden service detected!

I watched few videos about solving the problem but
they had error
[310] Failed to initialize critical task, reason: Forbidden service detected!
or
[308] Failed to initialize critical task, reason: Forbidden service detected!

but I have
314 .
Can anyone help?
Thanks

 

[leletong]

升级到 v1.70.2661 后无法打开 UFI-box

 

[dondav77]

PLZ EVEY ONE ON HERE IM NEW TO EMMC FIX I JUST GOT THE UFI BOX THAT I INTEND TO FIX BOOT LOOP ON AN MDM LOCKED SAMSUNG TAB S2 SM-T813 AFTER PERFORMING OPERATIONS AS IVE SEEN ON YOUTUBE VIDEOS NOW DEVICE NOT BOOTING UP ON CONNECTS AS ANDROID HS DEVICE IN DEVICE MANGER PLZ I NEED URGENT HELP...

 

[Akarsh M Rajawat]

can u help me resolve port busy, port failure error pleas

 

[routine-sleep]

Hi, I was trying to recover information for a NUU phone. The issue I am running into is the userdata partition is saying "Failed to open extfs,err: Filesystem has unsupported feature(s)!". I wasn't sure if there was a way around this or a way to allow for support?

Best Regards,

 

[Akarsh M Rajawat]

Hi,
If Any Have Problem Opartiong Ufi box Or Any Problem Face During Recover Handset
Post Here Your Full Detail With Screen Shot
We Try To Solve As Soon Possible

hi i am getting port error and connection to brom fail device busy

 

[Akarsh M Rajawat]

can any one help

 

[ranjanjyoti]

This software is most time hang not smother....

 

[lucky643]

Sir,
I am new user Ufi Box,
UFI EMMC Tool Box ( A Error any EMMC)
(Full ok Head Set) or( Faulty,)
His Dump File (EXTCSD FILE ERROR)
(No Dump Write Any Size)
Full Dump Any Size Write complete, Butt Last extcsd file error and no dump write patch ,
Please Help Me this solution
Thanks,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Please login to view image

 

[mohitsai12]

hello sr plz resolve my problem
after ufi prog firmfare update show that error
+DlgError: [SERVER] Device should be run together with UFI Box which was bundled with this UFS-PROG!
ref: 2083341753 [56333,56619]
Error code: 403
Error: Fw update query failed, please reconnect box and retry !

 

[kernel55005]

can any one guide me how can fix this error

ufi box [SN:...............]
failed to query device info, no smart card detected

i try to reinstall ufi setup last varsion same problem so i install on new pc same problem.

 

[ranjanjyoti]

Ufi always fail to write excsd .bin file

 

[standardtech1]

I have problems with the ufi box, every time I try to make a process that is long, the tool is paralyzed, the process remains in a part of any percentage, it is regularly after 20 seconds, the ufi stays with the light on green and everything stays Paralyzed, I asked for new ISP connectors, thinking that this was the problem, but nothing continues to paralyze. sorry for my english.

 

[ranjanjyoti]

Ext csd write error any solution pls help samsung a207 dump

 

[ranjanjyoti]

Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-2167
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - MMC
Manufacturer ID: 0x15 (Samsung)
Product name: K5XYMB (0x4b3558594d42), rev: 0x00, serial number: 0xAAA5EA2A
Manufacturing date: Dec 2014
CID: 1501004B 3558594D 4200AAA5 EA2AC1D0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)

Loading file: "\Nokia\Nokia_6.1(00WW_4_15O-V4.15O-QKQ1.190828.002)[KMDH6001DM-B422_FA429062]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Failed to switch[16][0,16,57] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[67][0,67,200] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[68][0,68,200] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[101][0,101,5] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[110][0,110,152] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[111][0,111,23] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[112][0,112,3] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[114][0,114,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[120][0,120,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[163][0,163,2] (return code: 4, CMD Error: Invalid response) !!!
Done
New EXT CSD info:
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x00
Secure Feature support: 0x55
Partition configuration: 0x38
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Fail....... Fail....... Fail....... Please solve extcsd write

 

[ranjanjyoti]

Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-2167
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - MMC
Manufacturer ID: 0x15 (Samsung)
Product name: K7XVMB (0x4b3758564d42), rev: 0x01, serial number: 0xE70AE02C
Manufacturing date: Jun 2014
CID: 1501004B 3758564D 4201E70A E02C61A6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x01
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 2 MiB
Boot2: 2 MiB
RPMB: 2 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)

Changing partition size of Boot to 4 MiB and RPMB to 4 MiB... Done
Loading file: "\Xiaomi\Redmi%20Note%204\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Failed to switch[16][0,16,59] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[17][0,17,1] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[31][0,31,1] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[64][0,64,255] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[65][0,65,255] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[66][0,66,55] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[96][0,96,62] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[110][0,110,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[111][0,111,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[114][0,114,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[120][0,120,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[121][0,121,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[163][0,163,2] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[179][0,179,56] (return code: 4, CMD Error: Invalid response) !!!
Done
New EXT CSD info:
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x00
Secure Feature support: 0x55
Partition configuration: 0x38
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00



ext_csd write error pls slove