Infinity k20 lenovo not read firmware please help me team cm2

Infinity Box & Dongle

asif33

Active Member
Feb 28, 2017
26
3
kpk
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!



- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:13

Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : SPRD ( Legacy )
BuildInfo : sp7731g_1h10_hd_oversea-user 6.0 MRA58K root-103233 release-keys
Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59

MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22.4_sc7731g_CP0_modem_sc7731g_CP0_modem


PSN1 : 0200911204359
PSN2 : 0200911204358

NVMng : SecurityInfo
IMEI[1] : 35588101xxxxxxxx
IMEI[2] : 35588101xxxxxxxx
WIFIMAC : 002715932909
BT_MAC : 258511204359
SEC : SLS:0, SKS:0, SKV:0


Done!
Elapsed: 00:01:00

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!


>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!
 

asif33

Active Member
Feb 28, 2017
26
3
kpk
ok phone info

Brand : QNET
Device : SP7731G_1H10
Product : SP7731G_1H10_HD_OVERSEA
Model : MATE 30PRO
Android : 6.0
Display id : J5_31GD3M20_HD_A001_DDR3_20210105
Bootloader : UNKNOWN
Manufacturer : MAXTRON
Baseband : TM_BASE_W17.22.4|SC7731G_CP0_MODEM|05-31-2017 21:23:59
Security Patch : 2016-07-01
Hardware RO : SP7731G_1H10
Product Board : SP7731GEA_HDR
CPU Type : ARMEABI-V7A,ARMEABI
Crypt State : UNENCRYPTED
USB State : MTP,ADB
Boot Hardware : SP7731G_1H10
Build Date : 2021Ź´ 01ÆŒˆ 05Æ—¥ ƘŸÆŒŸÄºŒ 14:51:09 CST
Sim Operator : ,
ALL Done





1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!


>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!
 

Infinity-Box

Product Supporter
Feb 10, 2019
1,385
325
Code:
>>>  Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>>  Make sure you have made "IDENTIFY" first!
Hi,
Please click to IDENTIFY button first and then make an operation.
 
  • Like
Reactions: asif33 and axecomlb

asif33

Active Member
Feb 28, 2017
26
3
kpk
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
>>> ERROR : Baud set failed! Use default!
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!


>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!


1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : SPRD ( Legacy )
BuildInfo : sp7731g_1h10_hd_oversea-user 6.0 MRA58K root-103233 release-keys
Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59

MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22.4_sc7731g_CP0_modem_sc7731g_CP0_modem


PSN1 : 0200914082446
PSN2 : 0200914082445

NVMng : SecurityInfo
IMEI[1] : 355881014435485
IMEI[2] : 355881014435493
WIFIMAC : 002715719739
BT_MAC : 328914082446
SEC : SLS:0, SKS:0, SKV:0


Done!
Elapsed: 00:00:59


 

asif33

Active Member
Feb 28, 2017
26
3
kpk
Code:
>>>  Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>>  Make sure you have made "IDENTIFY" first!
Hi,
Please click to IDENTIFY button first and then make an operation.

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : SPRD ( Legacy )
BuildInfo : sp7731g_1h10_hd_oversea-user 6.0 MRA58K root-103233 release-keys
Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59

MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22.4_sc7731g_CP0_modem_sc7731g_CP0_modem


PSN1 : 0200914082446
PSN2 : 0200914082445

NVMng : SecurityInfo
IMEI[1] : 355881014435485
IMEI[2] : 355881014435493
WIFIMAC : 002715719739
BT_MAC : 328914082446
SEC : SLS:0, SKS:0, SKV:0


Done!
Elapsed: 00:00:59

Operation : Read FW [ v2.14 ]
 

asif33

Active Member
Feb 28, 2017
26
3
kpk
BootMode : SVC info is ok read
Operation : Read FW [ v2.14 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
 

Mtenget

Junior Member
Jun 28, 2020
3
1
Arusha
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!



- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:13

Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : SPRD ( Legacy )
BuildInfo : sp7731g_1h10_hd_oversea-user 6.0 MRA58K root-103233 release-keys
Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59

MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22.4_sc7731g_CP0_modem_sc7731g_CP0_modem


PSN1 : 0200911204359
PSN2 : 0200911204358

NVMng : SecurityInfo
IMEI[1] : 35588101xxxxxxxx
IMEI[2] : 35588101xxxxxxxx
WIFIMAC : 002715932909
BT_MAC : 258511204359
SEC : SLS:0, SKS:0, SKV:0


Done!
Elapsed: 00:01:00

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!


>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!
did you solve your problem?
 

Infinity-Box

Product Supporter
Feb 10, 2019
1,385
325
BootMode : SVC info is ok read
Operation : Read FW [ v2.14 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
I guess it's a problem with SoC drivers, itmstall latest drivers from Infinity server.
 
Top