1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:13
Operation : Identify [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : SPRD ( Legacy )
BuildInfo : sp7731g_1h10_hd_oversea-user 6.0 MRA58K root-103233 release-keys
Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59
MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22.4_sc7731g_CP0_modem_sc7731g_CP0_modem
PSN1 : 0200911204359
PSN2 : 0200911204358
NVMng : SecurityInfo
IMEI[1] : 35588101xxxxxxxx
IMEI[2] : 35588101xxxxxxxx
WIFIMAC : 002715932909
BT_MAC : 258511204359
SEC : SLS:0, SKS:0, SKV:0
Done!
Elapsed: 00:01:00
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!
Reconnect Power/Cable!
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:13
Operation : Identify [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : SPRD ( Legacy )
BuildInfo : sp7731g_1h10_hd_oversea-user 6.0 MRA58K root-103233 release-keys
Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59
MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22.4_sc7731g_CP0_modem_sc7731g_CP0_modem
PSN1 : 0200911204359
PSN2 : 0200911204358
NVMng : SecurityInfo
IMEI[1] : 35588101xxxxxxxx
IMEI[2] : 35588101xxxxxxxx
WIFIMAC : 002715932909
BT_MAC : 258511204359
SEC : SLS:0, SKS:0, SKV:0
Done!
Elapsed: 00:01:00
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!
Reconnect Power/Cable!