New Martview RB-03----EMMS UFS297 chip welding operation tutorial and video

Martview · Mar 8, 2024

Martview RB-03----EMMS UFS297 chip welding operation tutorial and video

Operation video:

Operation tutorial:

1. Install the chip which needs to soldering.

a. Knob adjusts lateral movement of the chip holder Module, inward or outward simultaneously.

b. Large turntable adjusts the longitudinal movement of the two chip holder modules, inward or outward simultaneously.

c. Turn the screw to lock the turntable to prevent accidentally touching the turntable and causing the fixed chip to fall off.

2. Cleaning the tin balls, also be used for chip glue removal.

3. Put stencil net and alignment position.

Please login to view image

4. Set Stencil Net Positioning Module Height.

The four corners are marked with scales and direction marks. The scales can be better set to support chips of different thicknesses.

The direction marks can quickly distinguish the up and down movement methods.

Please login to view image

5. Apply Solder Paste.

Please login to view image

6. Use hot air stations to heat, start by slowly heating from one corner inward.

Please login to view image

7. Complete tin planting

Please login to view image

john6666 · Mar 23, 2024

Great tool

Search

Search

New Martview RB-03----EMMS UFS297 chip welding operation tutorial and video

Martview

Martview RB-03----EMMS UFS297 chip welding operation tutorial and video

Operation video:

Operation tutorial:

1. Install the chip which needs to soldering.

a. Knob adjusts lateral movement of the chip holder Module, inward or outward simultaneously.

b. Large turntable adjusts the longitudinal movement of the two chip holder modules, inward or outward simultaneously.

c. Turn the screw to lock the turntable to prevent accidentally touching the turntable and causing the fixed chip to fall off.

2. Cleaning the tin balls, also be used for chip glue removal.

3. Put stencil net and alignment position.

4. Set Stencil Net Positioning Module Height.

The four corners are marked with scales and direction marks. The scales can be better set to support chips of different thicknesses.

The direction marks can quickly distinguish the up and down movement methods.

5. Apply Solder Paste.

6. Use hot air stations to heat, start by slowly heating from one corner inward.

7. Complete tin planting

john6666

Junior Member

New Martview RB-03----EMMS UFS297 chip welding operation tutorial and video

Martview

Martview RB-03----EMMS UFS297 chip welding operation tutorial and video​

Operation video:​

Operation tutorial:​

1. Install the chip which needs to soldering.​

a. Knob adjusts lateral movement of the chip holder Module, inward or outward simultaneously.​

b. Large turntable adjusts the longitudinal movement of the two chip holder modules, inward or outward simultaneously.​

c. Turn the screw to lock the turntable to prevent accidentally touching the turntable and causing the fixed chip to fall off.​

2. Cleaning the tin balls, also be used for chip glue removal.​

3. Put stencil net and alignment position.​

4. Set Stencil Net Positioning Module Height.​

The four corners are marked with scales and direction marks. The scales can be better set to support chips of different thicknesses. ​

The direction marks can quickly distinguish the up and down movement methods.​

5. Apply Solder Paste.​

6. Use hot air stations to heat, start by slowly heating from one corner inward.​

7. Complete tin planting​

john6666

Junior Member

Martview RB-03----EMMS UFS297 chip welding operation tutorial and video

Operation video:

Operation tutorial:

1. Install the chip which needs to soldering.

a. Knob adjusts lateral movement of the chip holder Module, inward or outward simultaneously.

b. Large turntable adjusts the longitudinal movement of the two chip holder modules, inward or outward simultaneously.

c. Turn the screw to lock the turntable to prevent accidentally touching the turntable and causing the fixed chip to fall off.

2. Cleaning the tin balls, also be used for chip glue removal.

3. Put stencil net and alignment position.

4. Set Stencil Net Positioning Module Height.

The four corners are marked with scales and direction marks. The scales can be better set to support chips of different thicknesses.

The direction marks can quickly distinguish the up and down movement methods.

5. Apply Solder Paste.

6. Use hot air stations to heat, start by slowly heating from one corner inward.

7. Complete tin planting