Solved Oppo A3s CPH1853 Remove Pattern Lock, Without Flashing Complete Guide With Ufi

This topic has been solved

ibrahimalrahi

Member
Oct 7, 2018
11
3
Bangladesh
Skype
ibrahimalrahi
Hello everyone, Assalamu alikum
My A3s show this message
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-8142
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

Now phone is dead show only 9008 port
How to solve it? please
 

ibrahimalrahi

Member
Oct 7, 2018
11
3
Bangladesh
Skype
ibrahimalrahi
Hello everyone, Assalamu alikum
My A3s CPH1853 show this message
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-8142
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

Now phone is dead show only 9008 port
How to solve it? please
 
Jul 8, 2019
10
3
Hello everyone, Assalamu alikum
My A3s CPH1853 show this message
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-8142
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

Now phone is dead show only 9008 port
How to solve it? please
= resolderback isp pin back
  • identify
  • change clock to 48 mhz
  • then factory reset again then ok
 

Ameen7311

Junior Member
Jul 26, 2019
2
0
Oppo A3s CPH1853 Remove Pattern Lock, Remove Password Without Flashing Complete Guide With Ufi Box

sir mene new ufi box liya lekin me phone ko connect nhi kr pa rha hu or isp pinout bhi shi jagha pr lga hai phir bhi data0 note proplry connect dhikha rha hai
 

sharrymz

Active Member
May 23, 2017
48
7
UAE
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-xxxx-xxxx
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 20, CMD Error: Invalid response) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

i am facing this problem a3s 1853 not connecting
 

sharrymz

Active Member
May 23, 2017
48
7
UAE
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-xxxx-xxxx
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x06, serial number: 0xC5F307BD
Manufacturing date: Nov 2018
CID: 15010051 4536334D 4206C5F3 07BDB5EA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)

special task button is gray and partition not show .
 

cellbhai

Friend's Martview
Sep 26, 2018
345
113
Hello I'm trying to remove pin password but ufi says factory reset failed
Dear friend post your log or screen shot or go here open emmc text and copy all and past here ROOT c/UFI/emmc tool box text
 
Last edited:

AnonDz

Member
Sep 10, 2017
10
2
algeria
hey guys anyone can help me here i have this oppo cph1853 after i connected it with my octoplus jtag pro and erase userdata the phone died and only qlm mode i did write a full dump bin and skiped this 4 and userdata and samething did restore backup ext_csd and nothing seems to work i am downloading a full extrated firmware abd will try to write and see

P01: oppodycnvbk (00005000, 00A00000) 10 MB

P02: oppostanvbk (00A05000, 00A00000) 10 MB

P03: modemst1 (01405000, 00180000) 1536 KB

P04: modemst2 (01585000, 00180000) 1536 KB


Model Settings:

Interface : eMMC

Voltage : 2.8V

Bus Mode : 1 bit

Bus speed : Auto



Connecting...

Device : Samsung eMMC QE63MB

Page size : 512 B

Block size : 512 B

Block count : 30535680

Size : 14.56 GB (14910.00 MB)

---------------------------------------------------------------

CID Info



CID : 150100514536334D4203FDCEF23EC5CF

Manufacturer ID : 0X15

Device/BGA : BGA (Discrete embedded)

OEM/Application ID : 0X00

Product name : QE63MB

Product revision : 0.3

Product serial number : (hex) FDCEF23E

Manufacturing date : 12/2018

---------------------------------------------------------------

CSD Info



CSD : D02701320F5903FFF6DBFFEF8E40400D

CSD structure : CSD version No. 1.2

SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,

4.51, 5.0, 5.01, 5.1

Data read access time1: 15 ms

TRAN speed : 26 MHz

READ block length : 512 Bytes

WP group enable : YES

PERM_WRITE_PROTECT : NO

TMP_WRITE_PROTECT : NO

---------------------------------------------------------------

EXTCSD Info



Revision 1.8 (for MMC v5.1)

Erase block size : 512 Kbytes

Boot1 size : 4096 Kbytes

Boot2 size : 4096 Kbytes

RPMB size : 4096 Kbytes



Partition config : (0x38) 00111000

Boot partition enable : User area

(Bus width = 1Bit)

Boot ACK : No boot acknowledge sent (default)



Boot bus conditions : (0x00) 00000000

Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)

Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)

Boot mode : Use single data rate + backward compatible timings in boot operation (default)



RST_n function : (0x01) RST_n signal is permanently enabled



Partitioning support : Device supports partitioning features

Enhanced attribute : Device can have enhanced technological features in partitions and user data area.

Max enhanced data size: 7626752 Kbytes

Partitions attribute : 0x0

Part setting completed: 0x0

GP partition 1 size : 0 b

GP partition 2 size : 0 b

GP partition 3 size : 0 b

GP partition 4 size : 0 b

Enhanced area size : (0x0) 0 b

Enhanced area start : (0x0) 0 b



---------------------------------------------------------------Searching Android build info...

Ok



Disk/Image size : a3e00000 bytes

Device sector size : 512 bytes

Partition offset : 2179072

Number of sectors : 7030784

Build ID :OPM1.171019.026

Release ID :8.1.0

Architecture ABI :arm64-v8a

Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi

Build Description :S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190105.224843 release-keys



Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/QE63MB_10_09_2019_13_59_58.bin.

Connect successful.

---------------------------------------------------------------

SW: 1.7.7; FW: 1.24.

P00: GPT (00000000, 00005000) 20 KB

P01: oppodycnvbk (00005000, 00A00000) 10 MB

P02: oppostanvbk (00A05000, 00A00000) 10 MB

P03: modemst1 (01405000, 00180000) 1536 KB

P04: modemst2 (01585000, 00180000) 1536 KB

P05: persist (01705000, 02000000) 32 MB

P06: opporeserve1 (03705000, 00800000) 8 MB

P07: opporeserve2 (03F05000, 04000000) 64 MB

P08: fsc (07F05000, 00000400) 1024 b

P09: ssd (07F06000, 00002000) 8 KB

P10: sbl1 (07F08000, 00080000) 512 KB

P11: rpm (07F88000, 00080000) 512 KB

P12: tz (08008000, 00200000) 2048 KB

P13: devcfg (08208000, 00040000) 256 KB

P14: sbl1bak (08248000, 00080000) 512 KB

P15: rpmbak (082C8000, 00080000) 512 KB

P16: tzbak (08348000, 00200000) 2048 KB

P17: devcfgbak (08548000, 00040000) 256 KB

P18: dsp (08588000, 01000000) 16 MB

P19: DDR (09800000, 00008000) 32 KB

P20: fsg (09808000, 00400000) 4 MB

P21: sec (09C08000, 00004000) 16 KB

P22: aboot (09C0C000, 00100000) 1024 KB

P23: abootbak (09D0C000, 00100000) 1024 KB

P24: modem (09E0C000, 08000000) 128 MB

P25: dtbo (11E0C000, 00800000) 8 MB

P26: vbmeta (1260C000, 00010000) 64 KB

P27: boot (1261C000, 04000000) 64 MB

P28: recovery (1661C000, 04000000) 64 MB

P29: devinfo (1A61C000, 00100000) 1024 KB

P30: splash (1A800000, 00B00000) 11 MB

P31: LOGO (1B300000, 02000000) 32 MB

P32: DRIVER (1D300000, 02000000) 32 MB

P33: cache (1F300000, 10000000) 256 MB

P34: misc (2F300000, 00100000) 1024 KB

P35: keystore (2F400000, 00080000) 512 KB

P36: config (2F480000, 00008000) 32 KB

P37: log (2F488000, 04000000) 64 MB

P38: oem (33488000, 00100000) 1024 KB

P39: limits (33800000, 00008000) 32 KB

P40: mota (34000000, 00080000) 512 KB

P41: dip (34080000, 00100000) 1024 KB

P42: mdtp (34180000, 02000000) 32 MB

P43: syscfg (36180000, 00080000) 512 KB

P44: mcfg (36200000, 00400000) 4 MB

P45: lksecapp (36800000, 00020000) 128 KB

P46: cmnlib (36820000, 00100000) 1024 KB

P47: cmnlib64 (36920000, 00100000) 1024 KB

P48: keymaster (36A20000, 00100000) 1024 KB

P49: lksecappbak (36B20000, 00020000) 128 KB

P50: cmnlibbak (36B40000, 00100000) 1024 KB

P51: cmnlib64bak (36C40000, 00100000) 1024 KB

P52: keymasterbak (36D40000, 00100000) 1024 KB

P53: apdp (37000000, 00040000) 256 KB

P54: msadp (37040000, 00040000) 256 KB

P55: dpo (37080000, 00002000) 8 KB

P56: logdump (37082000, 04000000) 64 MB

P57: vm-kystore (3B082000, 00100000) 1024 KB

P58: vm-data (3B182000, 00A00000) 10 MB

P59: hyp (3C000000, 00800000) 8 MB

P60: vm-system (3C800000, 04000000) 64 MB

P61: vm-linux (40800000, 02000000) 32 MB

P62: system (42800000, D6900000) 3433 MB

P63: vendor (119100000, 41F60000) 1055 MB

P64: userdata (15B800000, 2485FBE00) 9.131 GB

Writing EXT_CSD succesfully complete!

Disconnected.



Please disconnect battery and USB cable.



Model Settings:

Interface : eMMC

Voltage : 2.8V

Bus Mode : 1 bit

Bus speed : Auto



Connecting...

Device : Samsung eMMC QE63MB

Page size : 512 B

Block size : 512 B

Block count : 30535680

Size : 14.56 GB (14910.00 MB)

---------------------------------------------------------------

CID Info



CID : 150100514536334D4203FDCEF23EC5CF

Manufacturer ID : 0X15

Device/BGA : BGA (Discrete embedded)

OEM/Application ID : 0X00

Product name : QE63MB

Product revision : 0.3

Product serial number : (hex) FDCEF23E

Manufacturing date : 12/2018

---------------------------------------------------------------

CSD Info



CSD : D02701320F5903FFF6DBFFEF8E40400D

CSD structure : CSD version No. 1.2

SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,

4.51, 5.0, 5.01, 5.1

Data read access time1: 15 ms

TRAN speed : 26 MHz

READ block length : 512 Bytes

WP group enable : YES

PERM_WRITE_PROTECT : NO

TMP_WRITE_PROTECT : NO

---------------------------------------------------------------

EXTCSD Info



Revision 1.8 (for MMC v5.1)

Erase block size : 512 Kbytes

Boot1 size : 4096 Kbytes

Boot2 size : 4096 Kbytes

RPMB size : 4096 Kbytes



Partition config : (0x38) 00111000

Boot partition enable : User area

(Bus width = 1Bit)

Boot ACK : No boot acknowledge sent (default)



Boot bus conditions : (0x00) 00000000

Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)

Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)

Boot mode : Use single data rate + backward compatible timings in boot operation (default)



RST_n function : (0x01) RST_n signal is permanently enabled



Partitioning support : Device supports partitioning features

Enhanced attribute : Device can have enhanced technological features in partitions and user data area.

Max enhanced data size: 7626752 Kbytes

Partitions attribute : 0x0

Part setting completed: 0x0

GP partition 1 size : 0 b

GP partition 2 size : 0 b

GP partition 3 size : 0 b

GP partition 4 size : 0 b

Enhanced area size : (0x0) 0 b

Enhanced area start : (0x0) 0 b



---------------------------------------------------------------Searching Android build info...

Ok



Disk/Image size : a3e00000 bytes

Device sector size : 512 bytes

Partition offset : 2179072

Number of sectors : 7030784

Build ID :OPM1.171019.026

Release ID :8.1.0

Architecture ABI :arm64-v8a

Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi

Build Description :S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190105.224843 release-keys



Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/QE63MB_10_09_2019_14_02_07.bin.

Connect successful.

---------------------------------------------------------------

SW: 1.7.7; FW: 1.24.

P00: GPT (00000000, 00005000) 20 KB

P01: oppodycnvbk (00005000, 00A00000) 10 MB

P02: oppostanvbk (00A05000, 00A00000) 10 MB

P03: modemst1 (01405000, 00180000) 1536 KB

P04: modemst2 (01585000, 00180000) 1536 KB

P05: persist (01705000, 02000000) 32 MB

P06: opporeserve1 (03705000, 00800000) 8 MB

P07: opporeserve2 (03F05000, 04000000) 64 MB

P08: fsc (07F05000, 00000400) 1024 b

P09: ssd (07F06000, 00002000) 8 KB

P10: sbl1 (07F08000, 00080000) 512 KB

P11: rpm (07F88000, 00080000) 512 KB

P12: tz (08008000, 00200000) 2048 KB

P13: devcfg (08208000, 00040000) 256 KB

P14: sbl1bak (08248000, 00080000) 512 KB

P15: rpmbak (082C8000, 00080000) 512 KB

P16: tzbak (08348000, 00200000) 2048 KB

P17: devcfgbak (08548000, 00040000) 256 KB

P18: dsp (08588000, 01000000) 16 MB

P19: DDR (09800000, 00008000) 32 KB

P20: fsg (09808000, 00400000) 4 MB

P21: sec (09C08000, 00004000) 16 KB

P22: aboot (09C0C000, 00100000) 1024 KB

P23: abootbak (09D0C000, 00100000) 1024 KB

P24: modem (09E0C000, 08000000) 128 MB

P25: dtbo (11E0C000, 00800000) 8 MB

P26: vbmeta (1260C000, 00010000) 64 KB

P27: boot (1261C000, 04000000) 64 MB

P28: recovery (1661C000, 04000000) 64 MB

P29: devinfo (1A61C000, 00100000) 1024 KB

P30: splash (1A800000, 00B00000) 11 MB

P31: LOGO (1B300000, 02000000) 32 MB

P32: DRIVER (1D300000, 02000000) 32 MB

P33: cache (1F300000, 10000000) 256 MB

P34: misc (2F300000, 00100000) 1024 KB

P35: keystore (2F400000, 00080000) 512 KB

P36: config (2F480000, 00008000) 32 KB

P37: log (2F488000, 04000000) 64 MB

P38: oem (33488000, 00100000) 1024 KB

P39: limits (33800000, 00008000) 32 KB

P40: mota (34000000, 00080000) 512 KB

P41: dip (34080000, 00100000) 1024 KB

P42: mdtp (34180000, 02000000) 32 MB

P43: syscfg (36180000, 00080000) 512 KB

P44: mcfg (36200000, 00400000) 4 MB

P45: lksecapp (36800000, 00020000) 128 KB

P46: cmnlib (36820000, 00100000) 1024 KB

P47: cmnlib64 (36920000, 00100000) 1024 KB

P48: keymaster (36A20000, 00100000) 1024 KB

P49: lksecappbak (36B20000, 00020000) 128 KB

P50: cmnlibbak (36B40000, 00100000) 1024 KB

P51: cmnlib64bak (36C40000, 00100000) 1024 KB

P52: keymasterbak (36D40000, 00100000) 1024 KB

P53: apdp (37000000, 00040000) 256 KB

P54: msadp (37040000, 00040000) 256 KB

P55: dpo (37080000, 00002000) 8 KB

P56: logdump (37082000, 04000000) 64 MB

P57: vm-kystore (3B082000, 00100000) 1024 KB

P58: vm-data (3B182000, 00A00000) 10 MB

P59: hyp (3C000000, 00800000) 8 MB

P60: vm-system (3C800000, 04000000) 64 MB

P61: vm-linux (40800000, 02000000) 32 MB

P62: system (42800000, D6900000) 3433 MB

P63: vendor (119100000, 41F60000) 1055 MB

P64: userdata (15B800000, 2485FBE00) 9.131 GB
 
Last edited:
Top