Great .... but we need support for latest security support for Motorola XT 2503- XT 2505
Pandora 9.10 Release
Added support new MTK phones (new method)
(latest security not supported !!!)
Motorola Edge 2022 XT2205-1, XT2205-2, XT2205-3
Motorola Edge 2023 XT2305-1
Motorola Edge 40 Neo XT2307-1, XT2307-2, XT2307-3
Motorola Moto G Power 5G XT2311-3, XT2311-4, XT2311DL
Motorola Moto G54 5G XT2343-1, XT2343-2, XT2343-3, XT2343-4, XT2343-6
Motorola Moto G56 5G XT2529-1, XT2529-2, XT2529-3, XT2529-4
Added Unlock/Relock Bootloader and RPMB functions for recent MTK updates
Added support Mediatek devices
Oukitel C11 S, C11 S, F150 Bison, F150 H2022, F150 R2022, K10,
K10000, K10000 Max, K10000 Mix, K12, K13 Pro, K15 Pro, K16, K4000,
K4000 Pro, K6, K6000, K6000 Pro, K7, K7 Power, K7000, K8000, K9,
K9 Pro, P1, RT1, RT5, RT7 Titan, RT7 Titan 5G, WP10, WP12, WP13,
WP15, WP15 S, WP16, WP18, WP19, WP19 Pro, WP2, WP21 Ultra, WP35 S,
WP36 Pro, WP6, WP7, WP8 Pro, Y1000, Y4800
Added support more Unisoc devices
Oukitel C1 2025, Oukitel C1 Pro, Oukitel C1 Plus, Oukitel C2 2025,
Oukitel C3 2025, Oukitel C5 2025, Oukitel C59, Oukitel C59 Pro,
Oukitel C60, Oukitel C60 Pro, Oukitel C62, Oukitel C62 Pro,
Oukitel C65 Pro, Oukitel WP53 S
ZTE Blade A32 P963F90W, ZTE Blade A33 Plus P963F92, Blade A33s P963F93,
ZTE Blade A34 P963F94, ZTE Nubia Music Z2353, ZTE Blade A3 SE Z3101T
Added support more Qualcomm devices (EDL mode):
Asus Zenfone 5 X00QD, ZE620KL, ZF620KL
Asus ROG Phone 3 Strix I003DD
Asus Zenfone 8z ZS590KS, I006D
Fixed some bugs
Mega: https://mega.nz/file/ul8WlYzK...
Z3X Pandora 9.10 NEW Release
- Thread starter SPYROS
- Start date
Z3X Team
Selected model: Realme RMX3834 (Realme Note 50)
Operation: Repair
Software version: 9.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&234F0BFF&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 66666888838348
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : ums9230_hulk_Natv
Product Name : RMX3834
Product Device : RE5C9F
Product Board : ums9230_hulk
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Tue Sep 10 00:02:07 CST 2024
Display ID : RMX3834export_14_C.62
Security Patch : 2024-09-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 315
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1: 383152206243834
IMEI 2: xxxxxxxxxxxxxxxx
Repaired IMEI:
IMEI 1: 383152206243834
IMEI 2: xxxxxxxxxxxxxxxx
Check security state... OK [3]
Unlock bootloader... [0] OK
Patch modem check... already patched,skip
Patch cert... already patched,skip
Write IMEI... OK
Save NVD... OK
Done!
Operation: Repair
Software version: 9.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&234F0BFF&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 66666888838348
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : ums9230_hulk_Natv
Product Name : RMX3834
Product Device : RE5C9F
Product Board : ums9230_hulk
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Tue Sep 10 00:02:07 CST 2024
Display ID : RMX3834export_14_C.62
Security Patch : 2024-09-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 315
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1: 383152206243834
IMEI 2: xxxxxxxxxxxxxxxx
Repaired IMEI:
IMEI 1: 383152206243834
IMEI 2: xxxxxxxxxxxxxxxx
Check security state... OK [3]
Unlock bootloader... [0] OK
Patch modem check... already patched,skip
Patch cert... already patched,skip
Write IMEI... OK
Save NVD... OK
Done!
Selected model: Motorola XT2333-5 (Moto G23)
Operation: Erase FRP And Wipe
Software version: 9.9
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM4 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x64C19B60, 0x19D66C06, 0x74A63C86, 0x69C2D7BB
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A562
EMMC_ID : 0xD6010341334135363211CB68052F6AD3
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1CCF000000 (115,23Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : penangf
Product Device : penangf
Product Board : penangf
Board Platform : mt6768
Build ID : UHAS34.29-20
Build Date : Fri Jun 6 00:16:53 CST 2025
Display ID : UHAS34.29-20
Security Patch : 2025-06-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 221
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Motorola_XT2333-5%20(Moto%20G23)/FRP_BACKUP_(2025-14-14_10-33-21)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Formatting "md_udc" partition... [P1] OK
Wipe data done!
Operation: Erase FRP And Wipe
Software version: 9.9
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM4 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x64C19B60, 0x19D66C06, 0x74A63C86, 0x69C2D7BB
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A562
EMMC_ID : 0xD6010341334135363211CB68052F6AD3
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1CCF000000 (115,23Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : penangf
Product Device : penangf
Product Board : penangf
Board Platform : mt6768
Build ID : UHAS34.29-20
Build Date : Fri Jun 6 00:16:53 CST 2025
Display ID : UHAS34.29-20
Security Patch : 2025-06-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 221
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Motorola_XT2333-5%20(Moto%20G23)/FRP_BACKUP_(2025-14-14_10-33-21)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Formatting "md_udc" partition... [P1] OK
Wipe data done!
Selected model: Realme RMX3760 (Realme C53)
Operation: Repair
Software version: 9.10
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\5&136F0554&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0I7
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : ums9230_hulk_Natv
Product Name : RMX3760
Product Device : RE58C2
Product Board : ums9230_hulk
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Wed Dec 25 19:12:49 CST 2024
Display ID : RMX3760export_14_C.67
Security Patch : 2024-12-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 482
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1: 86
IMEI 2: 86
Repaired IMEI:
IMEI 1: 8672
IMEI 2: 8672
Check security state... OK [3]
Unlock bootloader... [0] OK
Patch modem check... OK
Patch cert... OK
Write IMEI... OK
Save NVD... OK
Done!
If your phone after this operation keeps rebooting - use wipe data option
Operation: Repair
Software version: 9.10
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\5&136F0554&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0I7
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : ums9230_hulk_Natv
Product Name : RMX3760
Product Device : RE58C2
Product Board : ums9230_hulk
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Wed Dec 25 19:12:49 CST 2024
Display ID : RMX3760export_14_C.67
Security Patch : 2024-12-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 482
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1: 86
IMEI 2: 86
Repaired IMEI:
IMEI 1: 8672
IMEI 2: 8672
Check security state... OK [3]
Unlock bootloader... [0] OK
Patch modem check... OK
Patch cert... OK
Write IMEI... OK
Save NVD... OK
Done!
If your phone after this operation keeps rebooting - use wipe data option
Selected model: Samsung SM-A145P (Samsung Galaxy A14)
Operation: Write TAR
Software version: 9.10
Extract scatter file... OK
Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x9FE5D074, 0x0A77E9B6, 0x1EF620CE, 0x5734DD76
Get Chip ID... [MT6768]
Get SOC ID... [C4953BDD6FDF74AEFFF4E960A86B1EAA375C148CCCDCC6FEE4 3483D9C9D51897]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445036444242025B72FA5FA80B
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DBB
EMMC_ID : 0x150100445036444242025B72FA5FA80B
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A145P
Product Name : a14mnnxx
Product Device : a14m
Build ID : AP3A.240905.015.A2
Build Date : Mon Oct 20 18:14:57 KST 2025
Firmware Version : A145PXXU9DYJ2
Partition "userdata" changed...skip
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "preloader"... OK
Download "spmfw"... OK
Download "scp1"... OK
Download "sspm_1"... OK
Download "tee1"... OK
Download "tzar"... OK
Download "lk"... OK
Download "dtbo"... OK
Download "vbmeta"... OK
Download "md1img"... OK
Download "param"... OK
Download "up_param"... OK
Download "boot"... OK
Download "recovery"... OK
Download "vbmeta_system"... OK
Download "efuse"... OK
Download "super"... OK
Download "prism"... OK
Download "optics"... OK
Download "cache"... OK
Download "omr"... OK
Download "userdata"... OK
Download "PIT"... OK
Flashing done!
Operation: Write TAR
Software version: 9.10
Extract scatter file... OK
Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x9FE5D074, 0x0A77E9B6, 0x1EF620CE, 0x5734DD76
Get Chip ID... [MT6768]
Get SOC ID... [C4953BDD6FDF74AEFFF4E960A86B1EAA375C148CCCDCC6FEE4 3483D9C9D51897]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445036444242025B72FA5FA80B
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DBB
EMMC_ID : 0x150100445036444242025B72FA5FA80B
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A145P
Product Name : a14mnnxx
Product Device : a14m
Build ID : AP3A.240905.015.A2
Build Date : Mon Oct 20 18:14:57 KST 2025
Firmware Version : A145PXXU9DYJ2
Partition "userdata" changed...skip
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "preloader"... OK
Download "spmfw"... OK
Download "scp1"... OK
Download "sspm_1"... OK
Download "tee1"... OK
Download "tzar"... OK
Download "lk"... OK
Download "dtbo"... OK
Download "vbmeta"... OK
Download "md1img"... OK
Download "param"... OK
Download "up_param"... OK
Download "boot"... OK
Download "recovery"... OK
Download "vbmeta_system"... OK
Download "efuse"... OK
Download "super"... OK
Download "prism"... OK
Download "optics"... OK
Download "cache"... OK
Download "omr"... OK
Download "userdata"... OK
Download "PIT"... OK
Flashing done!
Selected model: Samsung SM-A057F (Galaxy A05s)
Operation: Erase FRP
Software version: 9.10
BIT A or less is supported by EDL loader
Waiting for device... OK
Device found at COM3
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 3723204065
Sahara ver: 2
OEM PK HASH: AEF151384E7DDCDBBF6E8B926A64A8C1D850F826BA1EC4C06EED1F3E0B4BA95C96ED46B977A78FCBDB3FAFADD841F7CA
CPU: SM6225 (Snapdragon 680 4G)
Vendor: Samsung
MSM HW ID: 001B80E100200000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: F4B42AA96186B7ECEDAF73A1513A54956241F497
Loader PK hash: AEF151384E7DDCDBBF6E8B926A64A8C1D850F8C4C06EED1F3E0B4BA95C26BA1E96ED46B977A78FCBDB3FAFADD841F7CA
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Storage info:
Type: UFS
Name:
Page size: 1000
Block size: 1000
Partition count: 7
LU0 size: 0x1DA8BFC000 (118.64Gb)
LU1 size: 0x00007FC000 (7.98Mb)
LU2 size: 0x00007FC000 (7.98Mb)
LU3 size: 0x00003FC000 (3.98Mb)
LU4 size: 0x001FFFC000 (511.98Mb)
LU5 size: 0x00007FC000 (7.98Mb)
LU6 size: 0x0000000000 (0Byte(s))
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Serial Number : R7AX20B5K8F
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A057F
Product Name : a05snsdxx
Product Device : a05s
Product Board : bengal
Board Platform : bengal
Build ID : TP1A.220624.014
Build Date : Wed Nov 27 18:34:55 KST 2024
Display ID : UP1A.231005.007.A057FXXU7CXK7
Security Patch : 2024-11-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : A057FXXU7CXK7
Userdata FS Type : F2FS
Erase FRP... OK
Done!
Operation: Erase FRP
Software version: 9.10
BIT A or less is supported by EDL loader
Waiting for device... OK
Device found at COM3
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 3723204065
Sahara ver: 2
OEM PK HASH: AEF151384E7DDCDBBF6E8B926A64A8C1D850F826BA1EC4C06EED1F3E0B4BA95C96ED46B977A78FCBDB3FAFADD841F7CA
CPU: SM6225 (Snapdragon 680 4G)
Vendor: Samsung
MSM HW ID: 001B80E100200000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: F4B42AA96186B7ECEDAF73A1513A54956241F497
Loader PK hash: AEF151384E7DDCDBBF6E8B926A64A8C1D850F8C4C06EED1F3E0B4BA95C26BA1E96ED46B977A78FCBDB3FAFADD841F7CA
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Storage info:
Type: UFS
Name:
Page size: 1000
Block size: 1000
Partition count: 7
LU0 size: 0x1DA8BFC000 (118.64Gb)
LU1 size: 0x00007FC000 (7.98Mb)
LU2 size: 0x00007FC000 (7.98Mb)
LU3 size: 0x00003FC000 (3.98Mb)
LU4 size: 0x001FFFC000 (511.98Mb)
LU5 size: 0x00007FC000 (7.98Mb)
LU6 size: 0x0000000000 (0Byte(s))
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Serial Number : R7AX20B5K8F
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A057F
Product Name : a05snsdxx
Product Device : a05s
Product Board : bengal
Board Platform : bengal
Build ID : TP1A.220624.014
Build Date : Wed Nov 27 18:34:55 KST 2024
Display ID : UP1A.231005.007.A057FXXU7CXK7
Security Patch : 2024-11-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : A057FXXU7CXK7
Userdata FS Type : F2FS
Erase FRP... OK
Done!
Selected model: Samsung SM-A032F (Samsung Galaxy A03 Core)
Operation: Erase FRP And Wipe
Software version: 9.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\5&227DB1D&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: R7ATA0LXHFL
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A032F
Product Name : a3corexx
Product Device : a3core
Product Board : m168
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Thu Jun 12 16:38:43 KST 2025
Firmware Version : A032FXXS8CYF8
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "persistent" partition... OK
Formatting "userdata" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!
Operation: Erase FRP And Wipe
Software version: 9.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\5&227DB1D&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: R7ATA0LXHFL
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A032F
Product Name : a3corexx
Product Device : a3core
Product Board : m168
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Thu Jun 12 16:38:43 KST 2025
Firmware Version : A032FXXS8CYF8
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "persistent" partition... OK
Formatting "userdata" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!