Post Here Sucessfully Unlocked/Repair Phones With Umt Tool

Issac Phiamphu

Active Member
Dec 10, 2019
27
4
Redmi 6A successfully repair both IMEI 1 and IMEI 2. After write Original IMEI 1 and IMEI 2 stuck at NV Data Corrupted.
After that Remove one of the Resistor provided with IMAGE by UMT. After that restart phone and stuck again at NV Data Corrupted. Just select restart from Recovery Menu. 100% Tested.

Thank You
UMT Team.
 

Attachments

  • redmi6_6a_hw_mod.png
    redmi6_6a_hw_mod.png
    841.8 KB · Views: 32
  • Redmi 6A IMEI Repair.jpg
    Redmi 6A IMEI Repair.jpg
    78.9 KB · Views: 30
Last edited:
  • Like
Reactions: andersoncell

kabirsoft

Active Member
Oct 4, 2019
62
16
Brand : Samsung
Model : J700F
Operation : Reset FRP
Searching for Phone...Found
Port: : COM35 : SAMSUNG Mobile USB Modem #13
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : LSI7580 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.5
 

Ashok madivala

Active Member
May 1, 2017
20
3
kundapura
Realme 6i RMX2040 Pattern Unlock

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM82
Port Name: MediaTek USB Port_V1632 (COM82)
Path: \\?\usb#vid_0e8d&pid_0003#6&11e5a5e7&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_oppo6769_210728_201357.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM82)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Tue May 12 23:12:55 CST 2020
Build Flavor : full_oppo6769-user
Build Desc. : full_oppo6769-user 10 QP1A.190711.020 68b77aba7cb33275 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2020-05-05
Platform : MT6768
Board : oppo6769
Platform : mt6768
Userdata is NOT ENCRYPTED
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
 

TATAISONA

Friend's Martview
Jul 5, 2019
2,564
4,963
India
XIAOMI REDMI 7A STUCK ON LOGO SOLVED BY UMT

 

GSM *AR

Junior Member
Apr 30, 2020
4
3
Punjab Pakistan
oPPo A57 Pattern / pin / passcode unlocked By UMT
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO CPH1701 [msm8937] [CPH1701]
Brand : OPPO
Prod.Name : CPH1701
Software : CPH1701EX_11_A.34_180806, eng.root.20180806.181819 [Mon Aug 6 18:20:59 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-05-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.2
 

ismail2cnr

Member
Sep 19, 2018
8
3
Skype
ismail2cnr
LAVA LS000Z1 ONE CLICK DONE IN UMT

Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM35)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Manufacturer : LAVA
Build Date : Fri Jun 11 12:17:50 IST 2021
Build Flavor : Z1-user
Build Desc. : Lava_Z1_SW_V07_20210611
Android Ver. : 10
Display ID : Lava_Z1_SW_V07_20210611
Patch Level : 2021-04-05
Platform : MT6761
Board : Z1
Platform : mt6761
Userdata is NOT ENCRYPTED
Formatting Userdata...
- Success!
Disconnect Battery/Cable and Power On Phone.
 

Mijan597

Active Member
Oct 24, 2019
75
11
A10s A07f FRP



Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM29
Port Name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM29)
Path: \\?\usb#vid_0e8d&pid_2000#6&10f4bfcf&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM30
Port Name: MediaTek USB Port_V1632 (COM30)
Path: \\?\usb#vid_0e8d&pid_0003#6&10f4bfcf&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_s96116ca1_210912_165503.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM30)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Executing Flashing Task...
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Tue Mar 9 10:31:35 KST 2021
Build Flavor : a10sxx-user
Build Desc. : a10sxx-user 10 QP1A.190711.020 A107FXXS8BUC1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020.A107FXXS8BUC1
Patch Level : 2021-03-01
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
- Resetting FRP[2]...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
 

Ashok madivala

Active Member
May 1, 2017
20
3
kundapura
Ultimate Unisoc Module 0.1
Samsung SM-B310E Read Password


ACTION: Read Password
SELECTED: SC6530
EXE: Ultimate Unisoc Module v0.1
Start Detect phone.
Phone must be off without battery inside.
Insert USB cable after long press boot key, then put in the battery.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM20)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6530
FlashId: WINBOND: [0x800000]W25Q64FW
Reading Flash Info, wait...
Flash Size: $800000 Sector Size: $10000
IMEI 1:
IMEI 2:
[36D]Password: 1234
[257]Password: 1234
[36C]Password: 369369 Active
[can take 0-10 sec]Wait untill phone restart.
Total Time: 00:00:25
Done.
 

iph0ne7

Active Member
Oct 26, 2019
98
22
Motorola one macro frp remove done

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM135
Port Name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM135)
Path: \\?\usb#vid_0e8d&pid_2000#6&33b8e135&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM136
Port Name: MediaTek USB Port_V1632 (COM136)
Path: \\?\usb#vid_0e8d&pid_0003#6&33b8e135&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0788, [MT6771]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_lima_210926_111037.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM136)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : motorola
Manufacturer : motorola
Model : motorola one macro
Prod. Name : lima_retail
Device : lima
Build Date : Mon Sep 14 10:57:38 CDT 2020
Android Ver. : 9
Patch Level : 2020-09-01
Platform : MT6771
Board : lima
Platform : mt6771
Platform : MT6771
Board : lima
Platform : mt6771
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
 

Ashok madivala

Active Member
May 1, 2017
20
3
kundapura
Itel L5505 Pattern Unlock Done By Ultimate Unisoc Module 0.1

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.1
SELECTED: SC9832E_EMMC
ACTION: Format Userdata(misc)
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM20)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: T4VW82_8_12_26
Manufacturer: ITEL MOBILE LIMITED
Hardware: sp9832e_1h10_go
Build product name: L5505
Build description: SQ557_L5505_A47-user 9 PPR1.180610.011 46115 release-keys
Product name: SQ557
Transsion device name: itel A47
Build Id: PPR1.180610.011
Model: itel L5505
Android Release: 9
Android Version: L5505-SQ557-9.0-OP-V007-20201107
Security patch: 2020-11-05
This phone have frp partition.
[misc]Formating userdata, wait...
Wait untill phone will restart.
Log saved:
C:\Users\Ashok Madivala\Documents\spreadtrum_module\Saved_Logs\sp9832e_1h10_go_L5505-SQ557-9.0-OP-V007-20201107_format_userdata_misc.txt
Total Time: 00:00:13
Done.
 

elykia

Active Member
Sep 21, 2019
37
12
PayPal:

Donate money to this user
RESET LOCK VIVO X9 DONE
******************************

Device : Vivo X9
Operation : Reset Locks (Vivo)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM34)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1009900 [8976] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8976_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8976, EMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo [msm8952] [msm8952_64]
Brand : vivo
Prod.Name : msm8952_64
Software : OPM1.171019.019 release-keys, eng.compil.20210419.162632 [2021年 04月 19日 星期一 16:26:32 CST]
Android Ver. : 8.1.0
Patch Level : 2021-02-01
USERDATA : Encrypted
Reading Extended Information...OK
Model : vivo X9s
Product : PD1616B
Cust. Name : PD1616B_FULL_SC
Version : PD1616B_A_8.20.30
Resetting Locks (Vivo)...Done
Please wait for phone to reboot.
Operation Finished.
QcFire Ver. 7.3
 

qdoomdh

Member
Aug 10, 2020
12
3
iran
samsung A11 Android 11 Reset FRP via Qcfire
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 7A1DF77CBFBB0788FC8EA8D75792F665B38495C74C24E98E5908F89AAC71A27C
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_050]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : RP1A.200720.012.A115FXXU2BUH4, A115FXXU2BUH4 [Mon Aug 9 10:02:55 +07 2021]
Android Ver. : 11
Patch Level : 2021-07-01
Resetting FRP Lock......Done
Operation Finished.
1634749294821.png
 

Attachments

  • 1634749272591.png
    1634749272591.png
    52.4 KB · Views: 3

heartgamer

Junior Member
Aug 31, 2021
3
0
India
VIVO Y30 FORMAT Done using UMT Ver4.5
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM20 [MediaTek USB Port_V1632 (COM20)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&df2ee03&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_k65v1_64_bsp_211107_014328.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM20)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Sat Dec 19 17:47:46 CST 2020
Build Flavor : full_k65v1_64_bsp-user
Build Desc. : full_k65v1_64_bsp-user 10 QP1A.190711.020 compiler12191728 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2020-12-01
Platform : MT6765
Board : k65v1_64_bsp
Platform : mt6765
Userdata is NOT ENCRYPTED
Formatting Userdata...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]
 

heartgamer

Junior Member
Aug 31, 2021
3
0
India
VIVO Y30 FRP Done Using UMT
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM20 [MediaTek USB Port_V1632 (COM20)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&df2ee03&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_k65v1_64_bsp_211107_014909.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM20)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Sat Dec 19 17:47:46 CST 2020
Build Flavor : full_k65v1_64_bsp-user
Build Desc. : full_k65v1_64_bsp-user 10 QP1A.190711.020 compiler12191728 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2020-12-01
Platform : MT6765
Board : k65v1_64_bsp
Platform : mt6765
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]
 

saleque

Active Member
Nov 14, 2019
21
9
BD
Redmi 9c Bootloader Unlock One click by Umt tool
Operation : MTK Bootloader Unlock
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM15 [MediaTek USB Port_V1632 (COM15)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&123fa1c5&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768] [Helio P65/G85 k68v1]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: 7C81F465595BF9AF11A3118175C2B54E
Preparing device...
-- Success!
Preloader saved as : preloader_lancelot_211130_210513.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM15)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Manufacturer : Xiaomi
Market Name : Redmi 9
Build Date : Sat Oct 16 23:17:40 CST 2021
Build Flavor : lancelot-user
Build Desc. : lancelot-user 11 RP1A.200720.011 V12.5.3.0.RJCMIXM release-keys
Android Ver. : 11
Display ID : RP1A.200720.011
Patch Level : 2021-10-01
Userdata is NOT ENCRYPTED
Reading Data...
Bootloader Status : Locked [MP_Default]
Critical Lock Status : Locked [Default]
Unlocking Bootloader...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.6]
 

JOYMAAGSM

Member
Apr 10, 2019
11
3
Samsung m32 frp done by umt



Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM4 [MediaTek USB Port (COM4)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&226836f9&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768] [Helio P65/G85 k68v1]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_k69v1_64_titan_marmot_211202_195710.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Tue Aug 3 19:44:53 KST 2021
Build Flavor : a32xx-user
Build Desc. : a32xx-user 11 RP1A.200720.012 A325FXXU1AUH1 release-keys
Android Ver. : 11
Display ID : RP1A.200720.012.A325FXXU1AUH1
Patch Level : 2021-08-01
Platform : MT6768
Board : k69v1_64_titan_marmot
Platform : mt6768
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
- Resetting FRP[2]...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]


test point

 

elykia

Active Member
Sep 21, 2019
37
12
PayPal:

Donate money to this user
Wiko View Max, P200 FRP Done with UMT One Click
-----------------------------------------------------------


Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM6
Port Name: MediaTek PreLoader USB VCOM_V1633 (Android) (COM6)
Path: \\?\usb#vid_0e8d&pid_2000#5&31a55ecd&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM25 [MediaTek USB Port_V1633 (COM25)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&31a55ecd&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0699, [MT6739/MT6731] [Unknown]
Hardware Info: 0x8A00, 0xCB00, 0x02
Config : [SecureBoot: True] [SLA: False] [DA Auth: False]
MEID: D5F20B11043C4F2704540F9048B2F2C2
Preparing device...
-- Success!
Preloader saved as : preloader_p200_220129_111140.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM25)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Brand : WIKO
Manufacturer : WIKO
Model : W_P200
Prod. Name : W_P200EU
Device : W_P200
Build Date : Wed Sep 12 19:23:02 CST 2018
Build Flavor : full_p200-user
Build Desc. : full_p200-user 8.1.0 O11019 1536751672 release-keys
Android Ver. : 8.1.0
Display ID : O11019 release-keys
Patch Level : 2018-09-05
Model : W_P200
Platform : mt6739
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.8]
 

Ammar amjad

Active Member
Jun 2, 2021
15
2
Pakistan
oppo f5 unlock done



Operation : Oppo/Realme Factory Reset (Meta)
Checking for existing META ports...
No existing META port found.
Connect powered off phone...
Make sure to leave Buttons as soon as phone is detected.
Found MediaTek PreLoader USB VCOM_V1632 (Android) (COM68) on COM68
Device Path : \\?\usb#vid_22d9&pid_0006#6&35c31b9d&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek PreLoader USB VCOM_V1632 (Android) (COM68) on COM68
Device Path : \\?\usb#vid_22d9&pid_0006#6&35c31b9d&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Configuring Communication Channel...
Reading phone information...
CPU : MT6763
SW Ver. : MOLY.LR12A.R1.TC16.SP.V26.P58
HW Ver. : OPPO6763_C66_N1_HW
Brand: OPPO
Model: CPH1723
Name: OPPO F5
Platform: unknown
OEM Prod.: unknown
OEM Device: unknown
Build Date: Thu Sep 3 23:22:48 CST 2020
Display ID: CPH1723EX_11_A.45_200903
OTA Version: M6763A_11.A.45_0450_202009032146
Patch Level: 2019-10-05
Starting Safe Factory Reset...
Reset Success
Operation finished
If META method does not work, try Format FS in BROM mode.
 
Top