abmobilezonealipur

Friend's Martview
Sep 28, 2019
54
24
UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.


There are 2 version of UFI ISP Adapter available in the market


if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.


I hope it will work fine after these modifications.


Best Regards
Only Press Thanks Button
i have version two but still show same arare
 
  • Like
Reactions: chitranshgi

tjjxxs1

Junior Member
Nov 24, 2019
3
0
UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.


There are 2 version of UFI ISP Adapter available in the market


if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.


I hope it will work fine after these modifications.


Best Regards
Only Press Thanks Button



Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-3844
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD55 error, cmd response: 0xB36EB69F, card state: 255 (Card is in unknown state)

i am useing adapter v2 still getting these errors on samsung j100h is there anything to slove this problem ?
 

babu777

Junior Member
Dec 25, 2019
4
1
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
 

babu777

Junior Member
Dec 25, 2019
4
1
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-6147
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0xFFFFFFFF, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---









my new box problem
 

ravishukla

Junior Member
Jan 26, 2020
3
0
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
 

shalu

Member
Feb 3, 2020
7
0
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.
 

dj56140

Junior Member
Jan 11, 2020
1
0
SIR MY BOX WORKING FINE BUT NOW ANY TIME SHOW CMD ERROR
 

Attachments

  • CMD.jpg
    CMD.jpg
    198.6 KB · Views: 66
Top