UFI ISP ADAPTER VCC, VCCQ, Voltage Problem Solved

farhanab

Active Member
Sep 28, 2019
57
27
Alipur
UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.
View attachment 2901

There are 2 version of UFI ISP Adapter available in the market
View attachment 2897

if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.


I hope it will work fine after these modifications.


Best Regards
Only Press Thanks Button
i have version two but still show same arare
 
  • Like
Reactions: chitranshgi

tjjxxs1

Member
Nov 24, 2019
9
2
UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.


There are 2 version of UFI ISP Adapter available in the market


if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.


I hope it will work fine after these modifications.


Best Regards
Only Press Thanks Button



Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-3844
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD55 error, cmd response: 0xB36EB69F, card state: 255 (Card is in unknown state)

i am useing adapter v2 still getting these errors on samsung j100h is there anything to slove this problem ?
 

babu777

Junior Member
Dec 25, 2019
4
1
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
 

babu777

Junior Member
Dec 25, 2019
4
1
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-6147
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0xFFFFFFFF, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---









my new box problem
 

ravishukla

Junior Member
Jan 26, 2020
3
0
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
 

shalu

Member
Feb 3, 2020
7
0
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.
 

dj56140

Junior Member
Jan 11, 2020
1
0
SIR MY BOX WORKING FINE BUT NOW ANY TIME SHOW CMD ERROR
 

Attachments

  • CMD.jpg
    CMD.jpg
    198.6 KB · Views: 140

Jonatan_81

Junior Member
May 22, 2020
1
1
calle 58#13-21 floridablanca
please!!

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-2367
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 20, CMD Error: Invalid response) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
 
  • Like
Reactions: TREBLIGZENAB
Top