UFI ISP ADAPTER VCC, VCCQ, Voltage Problem Solved

rafique0

Active Member
Jan 13, 2018
15
9
larkana
Skype
[email protected]
All mtk device showing like this



Failed to initialize eMMC (return code: 20, CMD Error: Invalid response) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
 
  • Like
Reactions: TREBLIGZENAB

butux2020

Member
May 9, 2020
7
2
lagos
i got my ufi last week but could not connect
having error 17 try as many phones still the same
pls help me out
i want to get value for the money i used in purchasing the box.
 
  • Like
Reactions: TREBLIGZENAB

Jnrahul

Junior Member
Apr 26, 2020
4
0
Sonpuri
Sir ufi isp adapter ka d1 diod tuta ha jaha 4diod rahate hai vaha tin hi hai .sar pleaga help mi.vaha konsa diod lagana padenga
 

Shohid2020

Member
Aug 22, 2019
7
0
BGA254 EMMC Plz help me


Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-0115
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for OLD moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---
Check your connection, make sure eMMC inserted properly.
 

quimera40

Active Member
Feb 8, 2019
98
26
Skype
[email protected]
I do not understand why to sell they are the order of the day but to give a little support why the errors that we have with the boxes do not even appear
 

nickname078

Active Member
Apr 15, 2017
17
10
india
mi note 5 pro please help

Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for OLD moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---
Check your connection, make sure eMMC inserted properly.


thanks in advance
 

aman93

Member
Sep 17, 2020
5
0
Kolkata, India
Interface: UFI High-Speed
Serial number: 0011-8842-6162
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RC14MB (0x524331344d42), rev: 0x07, serial number: 0x18E1D8AF
Manufacturing date: Sep 2017
CID: 15010052 4331344D 420718E1 D8AF940E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\\%BACKUPS%\Motorola\Moto_G_(5S)_Plus(-8.1.0-OPS28.65-36-14)[KMRC10014M-B809_18E1D8AF]\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Failed to write block 0x00000000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
[32]Failed to Switch (return code: 1, CMD Error: Timeout) !!!


GIve me solution....
 

hafizbenito20

Junior Member
Dec 6, 2019
3
1
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-5181
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

I TRIED MANY TIMES CPH1853 AND OTHER ALWAYS SHOW THIS ERROR
I AM USING V2 ADAPTER
 

kutty vinu

Junior Member
Sep 11, 2020
1
0
nilgiris
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---


help me solution
run the application manually as administrator
defiantly it will work
 

cbminfotech

Member
Aug 28, 2019
10
0
Bhilai Chhattisgarh
Connection status: AMDHUB30:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7432
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0xFF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for OLD moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---


sir i have v2 ufi adaptor but facing same problem soluction please
 

cbminfotech

Member
Aug 28, 2019
10
0
Bhilai Chhattisgarh
Connection status: AMDHUB30:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7432
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 1, CMD Error: Timeout) !!!
CMD2 error, cmd response: 0xFFFFFFFF, card state: 255 (Card is in unknown state)
ALL_SEND_CID command failed.

How to Solve this Problem Sir Help Please
 

electronicc3

Junior Member
Feb 1, 2021
2
0
yemen
UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.
View attachment 2901

There are 2 version of UFI ISP Adapter available in the market


if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.


I hope it will work fine after these modifications.


Best Regards
Only Press Thanks Button
good thanks
 

cajet1122@

Member
Apr 12, 2021
8
0
imo owerri
UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.


There are 2 version of UFI ISP Adapter available in the market


if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.


I hope it will work fine after these modifications.


Best Regards
Only Press Thanks Button
 

cajet1122@

Member
Apr 12, 2021
8
0
imo owerri
i have the same problem with my ufi box the isp adapter picture you posted v1 and v2 are the same thing front and back image is the same explain better to us
 
Top