UMT UMT Box / PRO Modules Updates Here

[SPYROS]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v2.2
The Ultimate MediaTek Tool

What's New:


Huawei
- Y6 Pro (TIT-L01)

Infinix
- Hot 10S (X689)
- Smart 4 (X653)

Lava
- Z33 (LEX402)

Motorola
- E6 Plus
- E7 Power (XT2097-6)
- G54 5G (XT2343)

Xiaomi
- 11T (agate)
- Poco M6 5G (air)
- Redmi 13C 5G (air)
- Redmi 13R 5G (air)
- Redmi Note 4 (nikel)
- Redmi Note 9 (merlin)

Symphony
- Z50

Samsung
- Galaxy A04e (SM-A042F) BIT-7
- Galaxy A06 5G (SM-A066B) BIT-1
- Galaxy M06 5G (SM-M066B) BIT-1


NVRAM Explorer
- You can explore and view NVRAM contents using this function
- You can extract all NVRAM items in just a click
- Information like IMEI/CRC etc will be displayed
- IMEI can only be decrypted for 4G device
- Useful for users who need to replace eMMC

Smart Reset
- This option will reset FRP/USERDATA all together
- Use this option if Normal FRP Reset does not remove FRP

Format Storage Function (Extra Tab)
- Format All to format BOOT1/BOOT2/USERAREA
- Foramt All Except Preloader to format only USERAREA

Updated Boot in Preloader Mode
- Preloader handshake is optimized
- In case of handshake error, software will show error instead of silent exit

Updated Scatter File Handling
- Now you can select regional scatter which uses different files based on region
- It will auto parse and select files accordingly ie. for Tecno Spark 20 Pro

Updated Format Functions
- Fixed Download Error message on some devices after Format/FRP

Dump Tool Tab is now named Extra Tab

Minor GUI Changes and Improvements





Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[salingat]

please add ZTE A202ZT...

 

[GsmToto]

Brand/Model : Motorola / G22 (XT2231)
Operation : Reset FRP
BOOT CFG : [EXPLOIT:OFF]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&13de0221&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : 016F8F1EFE22193778D76337C96178C0
SoC ID[0] : BF795D4E51C570CFE97651D3DC8FA98E
SoC ID[1] : DBCAD0254065BA6C344E8241F07D2071
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
HRID : 160F2E9030B8A56766EBE84257EDBC21
RID : 160F2E9030B8A56766EBE84257EDBC21
Int. RAM : 0x000000000003A000 [232,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DV6DAB
CID : 15010044563644414202F8A8FE2F49D5
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1EC00000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Brand : motorola
Manuf. : motorola
Model : moto g22
Device : hawaiip
And. Ver. : 12
Prod. Name : hawaiip_g
Build Dt. : Sat Mar 1 11:00:40 CST 2025
Display ID : STAS32.79-77-28-63-9
Ver. Inc. : 77-28-63-9
Locale : en-US
Patch : 2025-03-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v2.1]
Log Saved : 20346731_175722.log

 

[ercanindir]

Hello, sorry if I put this in the wrong place. I bought a new UMT box and I get this error during IMEI repair. What's the problem? Can you help me?

 

[GsmToto]

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27 277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [56]
Reading Device Information...OK
Device : OPPO OPPO A57 [msm8937] [CPH1701]
Brand : OPPO
Prod.Name : CPH1701
Software : CPH1701EX_11_A.31_171214, eng.root.20171214.113651 [Thu Dec 14 11:39:35 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-12-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.8

 

[Rajivsumanth]

Try to frp reset samsung a156e 5g getting error set env failed!

 

[KHAN JAN]

Brand/Model : *Auto* / *Auto Detect*
Operation : Smart Reset
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek USB Port (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&32fe592f&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 38266DEE5366BB384F7EDA37F050C5B4
SoC ID[0] : FEBC7E2ED73694D3A8B7468CECF487AE
SoC ID[1] : 371F7A3E8EA137F58124C6F70B995D4C
Running Exploit...Done
Downloading Preloader...OK
PRELOADER : preloader_k65v1_64_bsp.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[INTERNAL] DA Selected!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100335636434D4202D4636A755667 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : B0B5539043A55EAFF54C50E3911FD454
RID : B0B5539043A55EAFF54C50E3911FD454
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000180000000 [6.00 GB]
Flash ID : 3V6CMB
CID : 150100335636434D4202D4636A755667
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1EC00000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1902
Device : PD1901F_EX
And. Ver. : 9
Prod. Name : PD1901F_EX
Build Dt. : Thu Jul 9 20:01:59 CST 2020
Display ID : PPR1.180610.011 release-keys
Ver. Inc. : compiler07092003
Locale : en-US
Patch : 2020-06-01
Bootloader : UNLOCKED
Running Smart Reset......Error
Operation Finished.
[UltimateMTK2 v2.2]
Log Saved : 20250503_211835.log

 

[zashish5213]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v2.2
The Ultimate MediaTek Tool

Please login to view image

What's New:


Huawei
- Y6 Pro (TIT-L01)

Infinix
- Hot 10S (X689)
- Smart 4 (X653)

Lava
- Z33 (LEX402)

Motorola
- E6 Plus
- E7 Power (XT2097-6)
- G54 5G (XT2343)

Xiaomi
- 11T (agate)
- Poco M6 5G (air)
- Redmi 13C 5G (air)
- Redmi 13R 5G (air)
- Redmi Note 4 (nikel)
- Redmi Note 9 (merlin)

Symphony
- Z50

Samsung
- Galaxy A04e (SM-A042F) BIT-7
- Galaxy A06 5G (SM-A066B) BIT-1
- Galaxy M06 5G (SM-M066B) BIT-1


NVRAM Explorer
- You can explore and view NVRAM contents using this function
- You can extract all NVRAM items in just a click
- Information like IMEI/CRC etc will be displayed
- IMEI can only be decrypted for 4G device
- Useful for users who need to replace eMMC

Smart Reset
- This option will reset FRP/USERDATA all together
- Use this option if Normal FRP Reset does not remove FRP

Format Storage Function (Extra Tab)
- Format All to format BOOT1/BOOT2/USERAREA
- Foramt All Except Preloader to format only USERAREA

Updated Boot in Preloader Mode
- Preloader handshake is optimized
- In case of handshake error, software will show error instead of silent exit

Updated Scatter File Handling
- Now you can select regional scatter which uses different files based on region
- It will auto parse and select files accordingly ie. for Tecno Spark 20 Pro

Updated Format Functions
- Fixed Download Error message on some devices after Format/FRP

Dump Tool Tab is now named Extra Tab

Minor GUI Changes and Improvements





Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
redmi 13c 5g frp not supported



Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[zashish5213]

Redmi 13c 5g not working

 

[on_network]

SAMSUNG A165F FRP NOT WORKING








Brand/Model : Samsung / Galaxy A16 (SM-A165F) BIT-2
Operation : Reset FRP
BOOT CFG : [EXPLOIT:OFF]
Waiting for Device...Found
Port : MediaTek USB Port (COM270)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&132fe193&0&1
#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6789 [1208] MTK Helio G99
Details : 8A00,CA00,0000
Sending Auth...OK
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
[DAA:ON] Factory Singed DA Required!
Sending 1st DA...OK
Jump DA Address...OK
V6 Protocol Detected!
Reading Hardware Information...OK
EXT_RAM Not Initialized!
Waiting for Init...OK
Setup Hardware Init...OK
Reading Hardware Information...OK
VERSION : 1.2
RNDM_ID : 1729c9f1901fc0f506d60fae82435bab
RAM_SIZE : 0x100000000 [4.00 GB]
STORAGE : KM5L9001DA-B424 [UFS]
TYPE : UFS
BLOCK_SIZE : 0x1000
BOOT1 SIZE : 0x0000000000400000 [4.00 MB]
BOOT2 SIZE : 0x0000000000400000 [4.00 MB]
USER SIZE : 0x0000001DCB000000 [119.17 GB]
RPMB SIZE : 0x0000000000000000 [0 bytes]
Sending DA2...Done
SLA : DISABLED
Life-Cycle : UNKNOWN
Reading Partition Table...Write Error!Failed
Operation Finished.
[UltimateMTK2 v2.2]
Log Saved : 20250513_161154.log

 

[Vishnu Mishra™]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v11.9
The Ultimate Qualcomm Tool




Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices

Please login to view image

What's New:

Huawei
- Honor Play 40 5G (WDY-AN00)

Samsung
- Galaxy A05s (SM-A057F) BIT-9
- Galaxy A05s (SM-A057G) BIT-6
- Galaxy A23 5G (SM-A236E) BIT-A
- Galaxy A52 (SM-A525F) BIT-B
- Galaxy A52 (SM-A525M) BIT-B
- Galaxy A52 5G (SM-A5260) BIT-C
- Galaxy A52 5G (SM-A526U) BIT-H
- Galaxy A52s 5G (SM-A528B) BIT-B
- Galaxy A70 (SM-A7050) BIT-5
- Galaxy A70 (SM-A705Y) BIT-5
- Galaxy A72 (SM-A725F) BIT-B
- Galaxy A72 (SM-A725M) BIT-A
- Galaxy Fold 5G (SM-F907N) BIT-3
- Galaxy M44 5G (SM-M446K) BIT-5
- Galaxy Note10+ 5G (SM-N9760) BIT-6
- Galaxy Note10+ 5G (SM-N976Q) BIT-5
- Galaxy S10 (SCV41) BIT-1
- Galaxy S10+ (SCV42) BIT-1
- Galaxy S20 Ultra 5G (SM-G9880) BIT-C
- Galaxy S21 FE 5G (SM-G990B) BIT-C
- Galaxy S21 FE 5G (SM-G990U) BIT-F
- Galaxy S21 Ultra 5G (SM-G9980) BIT-B
- Galaxy S21+ 5G (SM-G9960) BIT-B
- Galaxy S22 5G (SM-S9010) BIT-9
- Galaxy S22 5G (SM-S901U) BIT-8
- Galaxy S22 Ultra 5G (SM-S908U) BIT-8
- Galaxy S22+ 5G (SM-S906U) BIT-8
- Galaxy S23 (SM-S9110) BIT-5
- Galaxy S23 (SM-S911U) BIT-6
- Galaxy S23 5G (SM-S9110) BIT-6
- Galaxy S23 Ultra (SM-S9180) BIT-6
- Galaxy S23 Ultra (SM-S918N) BIT-6
- Galaxy S23 Ultra (SM-S918U) BIT-6
- Galaxy S23+ (SM-S9160) BIT-6
- Galaxy S23+ (SM-S916B) BIT-8
- Galaxy S23+ (SM-S916U) BIT-6
- Galaxy S24+ (SM-S9260) BIT-4
- Galaxy Tab A 8.0 2017 (SM-T385) BIT-4
- Galaxy Tab A9+ (SM-X216C) BIT-6
- Galaxy Tab A9+ (SM-X216N) BIT-6
- Galaxy Tab A9+ 5G (SM-X218B) BIT-6
- Galaxy Tab Active Pro (SM-T545) BIT-4
- Galaxy Tab Active Pro (SM-T547) BIT-3
- Galaxy Tab S3 9.7 (SM-T825C) BIT-3
- Galaxy Tab S5e (SM-T725) BIT-3
- Galaxy Tab S7+ (SM-T976B) BIT-7
- Galaxy Tab S9 Ultra (SM-X9180) BIT-5
- Galaxy XCover6 Pro (SM-G736U) BIT-A
- Galaxy Z Flip3 (SM-F711N) BIT-8
- Galaxy Z Flip3 5G (SM-F711U) BIT-B
- Galaxy Z Flip4 (SM-F721U) BIT-8
- Galaxy Z Flip5 (SM-F731U) BIT-6
- Galaxy Z Fold3 5G (SCG11) BIT-1
- Galaxy Z Fold3 5G (SM-F9260) BIT-9
- Galaxy Z Fold3 5G (SM-F926N) BIT-7
- Galaxy Z Fold4 (SM-F936U) BIT-8
- Galaxy Z Fold5 (SM-F946U) BIT-6


Update Internal Loader Database





CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.




Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...





SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 9 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED


Telegram

 

[on_network]

Nice update, please realme 7 pro rmx2170 is listening but loader not working pls check and fix it on the next update

 

[on_network]

Pls fix cpu not found in database issue for some of devices using generic method, and reboot from live boot problem

 

[gsmshankar]

mi 13c 5g not working fake update

 

[bashir786]

Brand/Model : Samsung / Galaxy A15 5G (SM-A156E) BIT-5
Operation : Reset FRP
BOOT CFG : [EXPLOIT:OFF]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM6)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&27c7ce02&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6835 [1209] Dimensity 6100+
Details : 8A00,CA01,0000
Sending Auth...OK
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
[DAA:ON] Factory Singed DA Required!
Sending 1st DA...OK
Jump DA Address...OK
V6 Protocol Detected!
SET_ENV Failed!
Please check USB Cable or Port!
Operation Finished.
[UltimateMTK2 v2.2]
Log Saved : 20250516_193327.log

 

[on_network]

Device : Realme 7 Pro (RMX2170)
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM22)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1901400 [SM6250] 00005100
OPK_DATA : 8928DD4BCB26CA67BC34A1BA4BA502841B20B4A1727FC96D525EDB04BD50C1F8
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [SM6250_001]...Error
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 11.9

 

[karabo13]

When are we getting mtk vivo updates like y02,y01,y02t and act?

 

[zashish5213]

When are we getting mtk vivo updates like y02,y01,y02t and act?

wait one or two days

 

[karabo13]

wait one or two days

OK I will wait n c

 

[GsmToto]

Device : Samsung Galaxy A23 (SM-A235M) BIT-A
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1801B00 [SM6225] 00002000
OPK_DATA : 2AF9F125F0A5D0D5B09049171627AA6E105908C6C81C64E5DF 2E8670228834D9
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A235M BIT-A.ufl]
Preparing Loader...Done
Sending Loader [SM-A235M BIT-A]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [78]
Reading Device Information...OK [Sign]
Build : A235MUBS9EXJ3
Int. Build : SM-A235M_LA_TPA_QKEY2
Resetting FRP Lock...Failed
Using Patch Method... Done Done
Operation Finished.
QcFire Ver. 11.8