★★ Post Here All Successful Stories By Infinity-Box CM/CM2- ★★

Akhtar Ali Jatt · Oct 15, 2019

Commandob Format Done
Operation : Format FileSystem [ v1.04 ]

Power off device
Press and hold BootKey or use BootCable
Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1A84F235F7DA_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!

Akhtar Ali Jatt · Oct 16, 2019

Vgotel i800 Read User Code Done
Operation : Read UserCode [ v1.58 ]

Power Off Phone , Remove battery , Insert back
Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 255 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : AE5AB9F818FFA31BEAB721D55145CF6F
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Read ExtData
Sorting ExtData
Reading UserCode

Active : No , Code : 76242

MobileTracker : O

Done!
Elapsed: 00:00:06
Reconnect Power/Cable!

Deepesh Sharma · Oct 18, 2019

Lyf F81 Restart Problem Solved By Flashing

Deepesh Sharma · Oct 18, 2019

Micromax Q402+ Successfully Flash

nasiraslam · Oct 19, 2019

Qmobile fire plus mt6580 read flash with cm2

Make sure device is powered off. Power off, if need. Wait 20 seconds after
Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM13)
MODE : PRELOADER PORT
PORT : 13
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 484A019064344741A20205048BA158F0
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 90014A484147346440502A2F058A18B
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HAG4d
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB800000 [ 14.68 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : C8E56A3ABCC6CB8DF74324FEB0E6A19C

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : MRA58K
Display ID : MRA58K release-keys
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-01-05
Build Time : 1553736233
Product Model : Fire Plus
Product Brand : O1
Product Name : Fire Plus
Product Device : Fire_Plus
Product Board : Fire Plus
Product Manfct : Fire Plus
Board Platform : mt6580
Product Info : zechin6580_weg_m

MT6580__Fire_Plus__Fire_Plus__6.0__MRA58K__zechin6580_weg_m
SecureDevice : Plain
Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 8%
Read : cache.img
Read : userdata.img

FW Size : 1.64 GB
Android Info saved : _Android_info.txt
Scatter : MT6580_Android_scatter.txt
Saved to : C:\Users\ideal\Desktop\MT6580__Fire_Plus__Fire_Plus__6.0__MRA58K__zechin6580_weg_m\

Done!
Elapsed: 00:06:33

nasiraslam · Oct 19, 2019

QMOBILE ROCKY SC6531E FM-BAR READ FLASH WITH CM2

Please login to view image

Operation : Read Flash [ v1.05 ]

Power off device
Press and hold BootKey or use BootCable
Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

Platform Version: MOCOR_16A.W17.43.4_Release
Project Version: SC6531EFM_BAR
MMI Version: SC6531EFM_BAR
BASE Version: BASE_SVN
HW Version: SC6531EFM_BAR
05-31-2019 11:01:58
LOG Version: V1.0.1
Saved to : C:\Users\ideal\Desktop\QMOBILE ROCKY SC6531E\MOCOR_16A.W17.43.4_Release.bin

Done!
Elapsed: 00:00:38

nasiraslam · Oct 21, 2019

Qmobile i8i sc8830 read flash with cm2

Please login to view image

Power off device, wait 10-15 seconds
Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : TRCC not supported!
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : QMobile I8i_MP_21_07
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-03-05
Build Time : 1500637835
Product Model : QMobile I8i
Product Brand : QMobile
Product Name : I8i
Product Device : I8i
Product Board : sp7731cea
Product Manfct : QMobile
Board Platform : sc8830
Product Info : I8i

VlnrLevel : 0x01

SC8830__QMobile__QMobile_I8i__6.0__QMobile_I8i_MP_ 21_07__MRA58K__I8i

Read : prodnv.img
ExtSparse : Compression ratio : 33%
Read : miscdata.bin
Read : wmodem.bin
Read : wdsp.bin
Read : wnvitem.bin
Read : modem_wcn.img
Read : wcnnvitem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 86%
Make : persist.img
Read : sysinfo.bin
ExtSparse : Compression ratio : 4%
Make : cache.img
Read : recovery.img
Make : userdata.img
Read : u-boot.bin
Read : u-boot-spl.bin

Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:11:53

Akhtar Ali Jatt · Oct 21, 2019

Qmobile i6i Format Done
Operation : Reset Settings/Format FS [ v2.06 ]

Make sure device is powered off. Power off, if need. Wait 20 seconds after
Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM264)
MODE : PRELOADER PORT
PORT : 264
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D37324A0E1002423D43E86A
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464A32374D4202100E6AE8433D
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FJ27MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00080000 [ 512.00 KB ]
USER : 0xE9000000 [ 3.64 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x30000000 [ 768.00 MB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 3A58CEE4E2EB0A96CD81D22CDD06AD36

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!

Akhtar Ali Jatt · Oct 24, 2019

Qmobile Evok Power Format Done

Operation : Reset Settings/Format FS [ v2.06 ]

Make sure device is powered off. Power off, if need. Wait 20 seconds after
Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM264)
MODE : PRELOADER PORT
PORT : 264
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 514E011336394A3275031052E5B33C0A
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 13014E51324A393652100375A3CB3E5
EMMC: VEN : MICRON | OEM : 4E01 | DEV : Q2J96R
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 11CA5F733B3109A0DB4F88B7AA89F591

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:43

Reconnect Power/Cable!

Akhtar Ali Jatt · Oct 25, 2019

Operation : Reset Settings/Format FS [ v2.06 ]

Make sure device is powered off. Power off, if need. Wait 20 seconds after
Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM264)
MODE : PRELOADER PORT
PORT : 264
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 484A019065314738481F070587936004
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 90014A48384731655071F484609387
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : H8G1e
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x1D2000000 [ 7.28 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 675EC7C64B9E63A1AAF812FCC28B8A9A

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:01:42

Reconnect Power/Cable!

Deepesh Sharma · Oct 26, 2019

lyf271i flashing

Please login to view image

Deepesh Sharma · Oct 26, 2019

Micromax q380 flashing done

Please login to view image

Deepesh Sharma · Oct 26, 2019

Micromax q427 lock remove done

Please login to view image

Deepesh Sharma · Oct 28, 2019

Lg D690 Flashing Done

Please login to view image

Deepesh Sharma · Oct 28, 2019

intex Mobile Frp Remove Done

Please login to view image

Akhtar Ali Jatt · Oct 28, 2019

Qmobile i8i Format Done

Operation : Format FS / Reset Settings [ v2.02 ]
Mode : Default [ Reset Settings + FRP ]

Power off device, wait 10-15 seconds
Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : : TRCC not supported!
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:06:35

devthakur81 · Oct 28, 2019

hello team

proudly present lenovo k9 mtk6765 done by infinity cm2

read info

Operation : Identify [ v2.06 ]

Make sure device is powered off. Power off, if need. Wait 20 seconds after
Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM17)
MODE : BOOTROM
PORT : 17
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BOOTROM
MODE : 0_base : BASE_v1844 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100474436424D4201783968C17519
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GD6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B7E0990118E761C5A85D52276CA4CCF8

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : L38043_ROW_OPEN_USER_M6762_O_MTK_S146_18I14
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1536901221
Product Model : Lenovo L38043
Product Brand : Lenovo
Product Name : L38043
Product Device : K9
Product Board : L38043
Product Manfct : Lenovo
Product Info : K9
Board Platform : mt6765

USERDATA : ENCRYPTED

Done!
Elapsed: 00:00:33

devthakur81 · Oct 28, 2019

hello team

proudly present lenovo k9 mtk6765 done by infinity cm2

frp done in 2 sec just press both volume button until connect 2nd da

Operation : Reset Settings/Format FS [ v2.06 ]

Make sure device is powered off. Power off, if need. Wait 20 seconds after
Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM17)
MODE : BOOTROM
PORT : 17
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BOOTROM
MODE : 0_base : BASE_v1844 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100474436424D4201783968C17519
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GD6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B7E0990118E761C5A85D52276CA4CCF8

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:29

Reconnect Power/Cable!

Dr.sunilsingh · Nov 3, 2019

Infinix Hot 8 __ ( X650C ) Android 9 FRP Done USERDATA : ENCRYPTED By Cm2 V2.6

Rich (BB code):

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connectioOperation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : PRELOADER PORT
MODE : INFINIX : SECURE_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: 90014A484347386134A216618952B591
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HCG8a4
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6F62B61435FB264DC34F1646D8023140

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Display ID     : X650C-H626DE-P-190807V174
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-08-05
Build Time     : 1565174444
Product Model  : Infinix X650C
Product Brand  : Infinix
Product Name   : H626
Product Device : Infinix-X650C
Product Manfct : INFINIX MOBILITY LIMITED
Product Info   : x650c_h626
Product Board  : Infinix-X650C
Board Platform : mt6765

USERDATA : ENCRYPTED


Done!
Elapsed: 00:00:17

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : PRELOADER PORT
MODE : INFINIX : SECURE_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: 90014A484347386134A216618952B591
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HCG8a4
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6F62B61435FB264DC34F1646D8023140

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:15

Reconnect Power/Cable!n ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : PRELOADER PORT
MODE : INFINIX : SECURE_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: 90014A484347386134A216618952B591
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HCG8a4
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6F62B61435FB264DC34F1646D8023140

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Display ID     : X650C-H626DE-P-190807V174
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-08-05
Build Time     : 1565174444
Product Model  : Infinix X650C
Product Brand  : Infinix
Product Name   : H626
Product Device : Infinix-X650C
Product Manfct : INFINIX MOBILITY LIMITED
Product Info   : x650c_h626
Product Board  : Infinix-X650C
Board Platform : mt6765

USERDATA : ENCRYPTED


Done!


Elapsed: 00:00:17

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : PRELOADER PORT
MODE : INFINIX : SECURE_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: 90014A484347386134A216618952B591
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HCG8a4
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6F62B61435FB264DC34F1646D8023140

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:15

Reconnect Power/Cable!

fuzaildj · Nov 3, 2019

good shotbdr saheb

Search

Search

★★ Post Here All Successful Stories By Infinity-Box CM/CM2- ★★

Akhtar Ali Jatt

Akhtar Ali Jatt

Deepesh Sharma

Friend's Martview

Deepesh Sharma

Friend's Martview

nasiraslam

Friend's Martview

nasiraslam

Friend's Martview

nasiraslam

Friend's Martview

Akhtar Ali Jatt

Akhtar Ali Jatt

Akhtar Ali Jatt

Deepesh Sharma

Friend's Martview

Deepesh Sharma

Friend's Martview

Deepesh Sharma

Friend's Martview

Deepesh Sharma

Friend's Martview

Deepesh Sharma

Friend's Martview

Akhtar Ali Jatt

devthakur81

Active Member

devthakur81

Active Member

Dr.sunilsingh

Friend's Martview

fuzaildj

Member