Samsung A5 Read FF Done
Code:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM47)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 110100303034474530 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM145)
-Reading GPT Drive OK
This phone have FRP partition.
Build ID: LMY47I
Display ID: KTU84P.A5000ZCU1AOE2
Version: 5.1
Build Date: Wed Oct 19 01:08:10 CST 2016
Model: gxq6580_weg_l
Brand: alps
Device: gxq6580_weg_l
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
IMEI[1]: 358286684163713
IMEI[2]: 358286684163721
Wait untill phone will start charging.
All done.
Code:
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM47)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 110100303034474530 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM145)
-Reading GPT Drive OK
Build ID: LMY47I
Display ID: KTU84P.A5000ZCU1AOE2
Version: 5.1
Build Date: Wed Oct 19 01:08:10 CST 2016
Model: gxq6580_weg_l
Brand: alps
Device: gxq6580_weg_l
Manufacturer: alps
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 358286684163713
IMEI[2] from NVRAM: 358286684163721
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x4b000000
Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_09_23_22_06)
Wait untill phone will start charging.
All done.