UMT UMT Box / PRO Modules Updates Here

[GsmToto]

USING PL_EXLOIT [VIVO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&81497bb&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 80ABE0C2B15C9CEF023C405471EA2FAC
SoC ID[0] : 6D9D428BB0236761E6A1981A12BCFF59
SoC ID[1] : F39976EEAA6B57008341FFF251C18BD9
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
HRID : 5CC73232479217B28C93BEAC2B6AF36F
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QD63MB
CID : 150100514436334D42015CC096AB16DB
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : 40%-50% LIFE TIME USED
Life. Est.B : 40%-50% LIFE TIME USED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1820
Device : PD1818HF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818HF_EX_A_1.72.5
Prod. Name : PD1818HF_EX
Build Dt. : Mon Mar 27 15:17:50 CST 2023
Display ID : O11019 release-keys
Ver. Inc. : 1679901475
Locale : en-US
Patch : 2021-10-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20479217_147323.log

 

[GsmToto]

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120D8292DDD37993 0D5891E3D8240BFCD85DF7E4AD067164D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [48]
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937] [ugglite]
Brand : xiaomi
Prod.Name : ugglite
Software : N2G47H, V8.5.5.0.NDFMIED [Wed Sep 27 21:52:15 WIB 2017]
Android Ver. : 7.1.2
Patch Level : 2017-09-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.5

 

[GsmToto]

USING PL_EXLOIT [SAMS MT6765 [A04E]]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&16a0d3be&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 8B4737384B6DA9344324BF7A5C89483M
SoC ID[0] : 42A073C818F837804F07375D4AF25BE3
SoC ID[1] : C3CE97CABD74DD9581138D5B8834A607
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : B6209C358393E4C483B63C9EA880E29M
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : 4X62MB
CID : 150100345836324D4200102B0797CAA4
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20895633_093421.log

 

[GsmToto]

Device : Realme GT Neo 3T (RMX3372)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1300C00 [SM8250] 00005100
OPK_DATA : 7B6CAB2FE03423CBF2437A8 55671B94AB676A1660AD1D3FAD016207F96893AFD
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM8250_004]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM8250, UFS, 256 GB
LU Count : 6 [0x03B0E000] [0x00000800] [0x00000800] [0x00002000] [0x0006A400] [0x0001A400]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [117]
Reading Device Information...OK [Sign]
Build : gÊÕúÆwì8ÐõCó¥›±±½ÖƒÃÇÕÄba¬béP
Int. Build : :$\f帱ðû¨[uUû:yˆýŽ?xʧD4H
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.

 

[GsmToto]

Device : Oppo A37f
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM48)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8916, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK [38]
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Brand : OPPO
Prod.Name : A37f
Software : A37fEX_11_190711, 1480422943 [Thu Jul 11 03:29:34 CST 2019]
Android Ver. : 5.1.1
Patch Level : 2018-03-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.6

 

[GsmToto]

Device : Nokia 6.1 Plus (TA-1083)
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM60)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : 2F69871CD490AF7CD743D2D97DB3E11DD1B3B722B5F896699F2916A09FA2DFF2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_023]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : MSM8996, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK [85]
Reading Device Information...OK
Software : 00WW_4_15R, 00WW_4_15R [Mon Jun 21 14:50:43 CST 2021]
Android Ver. : 10
Patch Level : 2021-06-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.6

 

[GsmToto]

Please login to view image

Device : Samsung Galaxy A05s (SM-A057F) BIT-3
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM60)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00002000
OPK_DATA : FE7A96F970CD7CE54D0256497B57539B3E3CBD084E89403B54C5B4506C905ECD
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A057F_BIT3.ufl]
Preparing Loader...Done
Sending Loader [SM-A057F_BIT3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, Unknown
LU Count : 6 [0x22382D47] [0x22382D47] [0x22382D47] [0x22382D47] [0x22382D47] [0x22382D47]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [81]
Reading Device Information...OK [Sign]
Build : A057FXXU1AWID
Int. Build : SM-A057F_SEA_XXV_QKEY0
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.6

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&16a0d3be&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : CD808B4276EA6890856A8CCD647437CF
SoC ID[0] : 17C0B56774C68358D5055D96ADA85338
SoC ID[1] : 63A51F610EC6E14F6B4D47EC999E9276
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_ice.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B0100593250303332005BE5405A89BF [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : 716CD54F13F838466549DEABBE3C22D9
Int. RAM : 0x0000000000039000 [228.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : Y2P032
CID : 9B0100593250303332005BE5405A89BF
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20453288_336594log

 

[GsmToto]

Brand/Model : Infinix/Tecno/iTel (ADB)
Operation : Disable Locks (ADB)
Searching for Device..Found
Brand : TECNO
Model : TECNO KJ5
Android Ver. : 13
Build : KJ5-H6931ABCDEFGHI-T-OP-241009V1507
Build Date : Wed Oct 9 00:41:01 CST 2024
Patch Level : 2024-09-05
Bootloader : unknown
Disabling Locks...Done
Please reboot phone to finish operation.
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20354686_647832.log

 

[Rajivsumanth]

umt add vivo 5g imei repair with latest security

 

[GsmToto]

Device : Xiaomi Redmi 9T
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2298FBDE6433FCE 1D25A7B0472DD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Please install driver from QcFire\Drivers folder using Device Manager.
Hardware : SDM662, UFS, Unknown
LU Count : 6 [0x22382D47] [0x22382D47] [0x22382D47] [0x22382D47] [0x22382D47] [0x22382D47]
WARNING! High Speed Driver is not installed.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [86]
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20221205021709, V13.0.2.0.SJQMIXM [Mon Dec 5 01:23:38 CST 2022]
Android Ver. : 12
Patch Level : 2022-12-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.6

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : META Functions (Enable ADB (Infinix))
Checking for exisitng device in META mode...No Device!
Waiting for Device...Found
Mode : PRELOADER
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Connecting Device...OK [SLA] Auth OK
Waiting for Device [META]...OK
Port : MediaTek USB VCOM (Android) (COM3)
Brand : TECNO
Model : TECNO KJ5
Market Name : unknown
Market Name : unknown
Manufac. : TECNO
Build Date : Wed Oct 9 00:41:01 CST 2024
Ven. Date : Tue Oct 8 23:51:51 CST 2024
Platform : MT6768
OEM : unknown
OEM Device : unknown
Disp. ID : KJ5-H6931ABCDEFGHI-T-OP-241009V1507
Inc. Ver. : 241008V1449
Patch Level : 2024-09-05
OTA Ver. : unknown
BRAND : TECNO
MODEL : TECNO KJ5
BUILD : KJ5-H6931ABCDEFGHI-T-OP-241009V1507
BUILD DATE : Wed Oct 9 00:41:01 CST 2024
Enabling ADB...Done
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20342104_186760.log

 

[SPYROS]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v2.0
The Ultimate MediaTek Tool

Please login to view image

What's New:


Added MT6765 and MT6768 in HONOR PL Exploit
Supported Models:
- Honor 8A Prime (JAT-LX1)
- Honor 8A Pro (JAT-L41)
- Honor Play 20 Pro (JDY-L29)
- Honor Play 20 Pro (JDY-LX2)
- Honor Play 8A (JAT-L09)
- Honor X5 Plus (WOD-LX1)
- Honor X5 Plus (WOD-LX2)
- Honor X5 Plus (WOD-LX3)
- Honor X5b (GFY-LX2)
- Honor X5b Plus (GFY-LX2P)
- Honor X6 (VNE-LX1)
- Honor X6 (VNE-LX2)
- Honor X6 (VNE-LX3)
- Honor X6a (WDY-LX1)
- Honor X6a (WDY-LX2)
- Honor X6b (JDY-LX1)
- Honor X6b (JDY-LX2)
- Honor X7a (RKY-LX1)
- Honor X7a (RKY-LX2)
- Honor X7a (RKY-LX3)
- Honor Y6s (JAT-L29)
- Honor Y6s (JAT-LX3)
- Other models based on same chipset may also be supported

Added PL Exploit Info Option
- Click Info icon after selecting exploit from list.
- It will show all the Hardware Supported in Log Window.

Added Various Defualt Dump Size in Dump Tool
- Now you can select Preset 1/2/4/8 GB USERAREA size
- Added check if entered size exceed phone flash capacity

Some Minor Improvements







Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[Ashique Khoso]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v2.0
The Ultimate MediaTek Tool

Please login to view image

What's New:


Added MT6765 and MT6768 in HONOR PL Exploit
Supported Models:
- Honor 8A Prime (JAT-LX1)
- Honor 8A Pro (JAT-L41)
- Honor Play 20 Pro (JDY-L29)
- Honor Play 20 Pro (JDY-LX2)
- Honor Play 8A (JAT-L09)
- Honor X5 Plus (WOD-LX1)
- Honor X5 Plus (WOD-LX2)
- Honor X5 Plus (WOD-LX3)
- Honor X5b (GFY-LX2)
- Honor X5b Plus (GFY-LX2P)
- Honor X6 (VNE-LX1)
- Honor X6 (VNE-LX2)
- Honor X6 (VNE-LX3)
- Honor X6a (WDY-LX1)
- Honor X6a (WDY-LX2)
- Honor X6b (JDY-LX1)
- Honor X6b (JDY-LX2)
- Honor X7a (RKY-LX1)
- Honor X7a (RKY-LX2)
- Honor X7a (RKY-LX3)
- Honor Y6s (JAT-L29)
- Honor Y6s (JAT-LX3)
- Other models based on same chipset may also be supported

Added PL Exploit Info Option
- Click Info icon after selecting exploit from list.
- It will show all the Hardware Supported in Log Window.

Added Various Defualt Dump Size in Dump Tool
- Now you can select Preset 1/2/4/8 GB USERAREA size
- Added check if entered size exceed phone flash capacity

Some Minor Improvements







Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

Add vgotel new models frp and factory reset support

 

[karabo13]

Add vgotel new models frp and factory reset support

Please login to view image

 

[sakilahmed]

setup pass

 

[rmparacha]

Dear support kindly add vivo y15s FRP reset option

 

[SPYROS]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v11.8
The Ultimate Qualcomm Tool



Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices

Please login to view image

What's New:

Oppo/Realme New Method
- Fully Automatic, Just select Oppo/Realme (New Method) in Brand
- Connection method is already added in log

Supported Chipsets:
- Snapdragon 665
- Snapdragon 710/712
- Snapdragon 730

Supported Models:
- A11 (PCHM10)
- A11N (PCHM00)
- A11X (PCHM30)
- A72 (CPH2067)
- A92 (CPH2059)
- K5 (PCNM00)
- Oppo A5 2020 (CPH1931)
- Oppo A9 2020 (CPH1937) - Tested
- Realme 5 (RMX1911) - Tested
- Realme 5i (RMX2030) - Tested
- Realme 5s (RMX1925)
- Realme Narzo 20A (RMX2050)
- Realme X2 (RMX1991)
- and others based on mentioned chipsets


Samsung
- Galaxy A23 5G (SM-A236V) BIT-7
- Galaxy A52 (SM-A525F) BIT-A
- Galaxy A52 (SM-A525M) BIT-A
- Galaxy M14 4G (SM-M145F) BIT-7
- Galaxy S20 5G (SM-G981N) BIT-7
- Galaxy S22 Ultra 5G (SM-S908E) BIT-C
- Galaxy S23 (SM-S911B) BIT-8
- Galaxy S23 Plus (SM-S916N) BIT-6
- Galaxy Tab A 10.5 (SM-T590) BIT-3
- Galaxy Tab Active4 Pro (SM-T636B) BIT-8
- Galaxy Tab S9 (SM-X716B) BIT-5
- Galaxy Tab S9 Ultra (SM-X910) BIT-5
- Galaxy Tab S9+ (SM-X810) BIT-5
- Galaxy Z Flip (SM-F700N) BIT-4
- Galaxy Z Flip 5G (SM-F707B) BIT-F
- Galaxy Z Flip 5G (SM-F707U1) BIT-9
- Galaxy Z Flip5 (SM-F731N) BIT-5
- Galaxy Z Flip6 (SM-F741N) BIT-2
- Galaxy Z Fold5 (SM-F946N) BIT-5

Updated Internal Loader Database


Thanks to:
- miftahulbari
- neyaz
- sarfaraz


Special thanks to all our users who helped us with their test reports.
Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.




It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 9 YEARS




WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.



STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED


Br,
UMT

 

[ghanshyamsolank]

Realme 5
Device : Oppo/Realme (New Method) -Auto Detect-
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM101)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1A01000 [SDM665] 00005100
OPK_DATA : 3E1A72E894609041EDAAAECBCB8204D8F8DBEF2C0EC1A4EE40B58B8F432F1729
Loading Data...Done
Loading Data...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM665, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK [84]
Reading Device Information...OK
Software : [Tue Aug 30 20:12:49 CST 2022]
Android Ver. : 10
Patch Level : 2022-09-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.8

 

[GsmToto]

Device : Vivo Y11
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.8
Opening Port...OK
Device in Firehose Mode Detected!
Detecting Storage Type...OK
Reading Partition Table...OK [59]
Reading Device Information...OK
Software : , eng.compil.20230410.110516 [Mon Apr 10 11:01:42 CST 2023]
Android Ver. : 11
Patch Level : 2022-03-01
Formatting userdata...DonePatched OK
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 11.8