Post Success Reports Here Successfully Repaired/Dead Recovered Handset By Ufi Box

ferouzkassim

Active Member
Oct 11, 2018
42
27
Uganda
Skype
ferouz_kassim
OPPO, model: PBBM00 (PBBM00) Realme c1 china version password reset done

Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0xB103D38A
Manufacturing date: Aug 2019
CID: 15010047 5036424D 4201B103 D38A86B6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\GP6BMB_B103D38A.ext_csd"

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: PBBM00
brand: OPPO, model: PBBM00 (PBBM00)
build model list: PBBM00 (PBBM00)
build id: OPM1.171019.026, version: 8.1.0 Oreo (PBBM00_11_A.16)
build description: S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190919.211818 release-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGP6000BM-BXXX/64G


Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0xB103D38A
Manufacturing date: Aug 2019
CID: 15010047 5036424D 4201B103 D38A86B6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

MasterClear [2]... Done
 

ferouzkassim

Active Member
Oct 11, 2018
42
27
Uganda
Skype
ferouz_kassim
OPPO R15X PASSWORD REMOVE DONE

OPPO, model: PBCM10 (OPPO R15x)

CHINA MODEL


Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Wrong wiring may results in damaged BOX or BRICK your device !!!
Don't use long wire, long wire will result in bad connections !!!
Disconnect ISP adapter from the box before soldering !!!
Make sure to use "anti static" soldering iron !!!
When internal VCC,VCCQ power is used, please use the -
external power DC 5V to the box for best performance.
--------------------------------------------------------------------------------

[ Open ISP Pinout picture ]
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0x1DE2E0D6
Manufacturing date: Nov 2018
CID: 90014A68 43386150 3E031DE2 E0D6B526
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\hC8aP_1DE2E0D6.ext_csd"

ANDROID System Info:
platform: sdm660, cpu abi: arm64-v8a
manufacturer: OPPO
board: sdm660, name: PBCM10
brand: OPPO, model: PBCM10 (OPPO R15x)
build model list: PBCM10 (OPPO R15x)
build id: OPM1.171019.011, version: 8.1.0 Oreo (PBCM10_11_A.19)
build description: sdm660_64-user 8.1.0 OPM1.171019.011 eng.root.20191213.211831 release-keys

crypto state: encrypted?
 

Deepesh Sharma

Staff member
Super Moderator
Apr 4, 2017
1,678
2,381
India
Sonork ID
100.1614172
Samsung Galaxy J7-2016(j710F) Stuck On Logo Emmc Life Time Complete
Replace New Emmc Samsung To Samsung+Reprogram All Job Done By Ufi-Box
Image

Reprogram

Image-1

set Successfully Recovered
 
Reactions: subhendu1

The Small Prince

No Life Poster
Aug 16, 2019
183
146
INDIA
Skype
Aftab_Ansari7899
PayPal
aftab7899
Oppo A1k pattern unlock after dead only mtk port show job done.many shopkeepers return the case.
Cmd Line break.
Dump file available with security backup


More information join our telegram discussions group.
Mobile Unlock & Dead Fix by UFI Box https://t.me/MobileUnlocking
*Dump File
*Mi Account Unlock
*Online Flashing Remotely Services
*Samsung Frp Instant
*Realme Flash Instant
*Oppo Flash Instant
*Ufi Support Instant
*After unlock dead set recover only 10 minuts
Rs.250 fix
Mobile Unlock & Dead Fix by UFI Box
www.martview-forum.com
11674
11675
11676
11678
Job Done