Post Success Reports Here Successfully Repaired/Dead Recovered Handset By Ufi Box

rihantelecombd

Active Member
Jun 22, 2020
15
2
bangladesh
OPPO 11 PRO ( CPH1969EX ) User lock + Dump Backup

Without Any Risk Of Stuck On Logo All Job Successfully Done Ufi-Box Only

RECOVER HANDSET SUCCESSFULLY ALIVE BY Dr.Research-Center-Team

View attachment 9640

View attachment 9641









Boss oppo F11pro SK hynix (hDEap3) Dump file need plz whatapp +8801712900***
 
Last edited by a moderator:

chlakh11787

Member
Jul 27, 2020
5
4
morocco
OPPO A7X CPH1903 PASSWORD REMOVE AND FRP DONE

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x958AA894
Manufacturing date: Sep 2018
CID: 15010047 5036424D 4201958A A89495CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\GP6BMB_958AA894.ext_csd"

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1903
brand: OPPO, model: CPH1903(OPPO AX7)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1903EX_11_A.09)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190225.181918 release-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGP6000BM-BXXX/64G


Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x958AA894
Manufacturing date: Sep 2018
CID: 15010047 5036424D 4201958A A89495CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Factory Reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.
Done.

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x958AA894
Manufacturing date: Sep 2018
CID: 15010047 5036424D 4201958A A89495CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Clear FRP Lock... Done.



pls i need français this file for unbrick cph1903

Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
 
  • Like
Reactions: Saurabh7298

mahmudhridoy

Junior Member
Apr 9, 2019
4
0
Please Help Me My UFI Box Update Nhi Ho Rahi
 

Attachments

  • IMG_20200819_120641.jpg
    IMG_20200819_120641.jpg
    173.7 KB · Views: 41
  • IMG_20200821_110122.jpg
    IMG_20200821_110122.jpg
    338.3 KB · Views: 41

ferouzkassim

Active Member
Oct 11, 2018
52
34
Uganda
Skype
ferouz_kassim
LG MS330 FAILED TO BOOT TO DOWNLOAD MODE (MODIFIED LAF FIXED)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G1e (0x483847316505), rev: 0x08, serial number: 0x20B9B922
Manufacturing date: Jul 2016
CID: 90014A48 38473165 050820B9 B9227384
CSD: D0270132 0F5903FF FFFFFFEF 8A4040D2
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked

ANDROID System Info:
platform: msm8909, cpu abi: armeabi-v7a
manufacturer: LGE
board: msm8909, name: m1_mpcs_us
brand: MetroPCS, model: LGMS330
build model list: LGMS330
build id: LMY47V, version: 5.1.1 Lollipop (MS33010m)
build description: m1_mpcs_us-user 5.1.1 LMY47V 1730518539138 release-keys

Internal storage: 4.52 GiB
crypto state: unencrypted
Selected: [HYNIX] eNAND H9TQ64ABJTMCUR-KUM/8GB+LPDDR3 16Gb (BGA221)


JUST CONNECT ISP AND FLASH KDZ
 

Attachments

  • photo_2020-08-26_15-43-15.jpg
    photo_2020-08-26_15-43-15.jpg
    250.1 KB · Views: 35
  • photo_2020-08-26_15-43-16.jpg
    photo_2020-08-26_15-43-16.jpg
    73.5 KB · Views: 32
  • photo_2020-08-26_15-43-17 (2).jpg
    photo_2020-08-26_15-43-17 (2).jpg
    77.4 KB · Views: 32
  • photo_2020-08-26_15-43-17.jpg
    photo_2020-08-26_15-43-17.jpg
    104.5 KB · Views: 35
  • photo_2020-08-26_15-43-18.jpg
    photo_2020-08-26_15-43-18.jpg
    98.2 KB · Views: 34

ferouzkassim

Active Member
Oct 11, 2018
52
34
Uganda
Skype
ferouz_kassim
oppo A31 CPH2015
PASSWORD REMOVE DONE

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DAB (0x444836444142), rev: 0x02, serial number: 0x85C46AE4
Manufacturing date: Mar 2020
CID: 15010044 48364441 420285C4 6AE43768
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6765_19581, name: CPH2015
brand: OPPO, model: CPH2015 (OPPO A31)
build model list: CPH2015 (OPPO A31)
build id: PPR1.180610.011, version: 9 Pie (CPH2015EX_11_A.37)
build description: full_oppo6765_19581-user 9 PPR1.180610.011 eng.root.20200716.095015 release-keys

crypto state: encrypted?
crypto state: encrypted?
EXT_CSD backup saved to "\\%BACKUPS%\DH6DAB_85C46AE4.ext_csd"
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMDH6000DA-BXXX/64G






Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DAB (0x444836444142), rev: 0x02, serial number: 0x85C46AE4
Manufacturing date: Mar 2020
CID: 15010044 48364441 420285C4 6AE43768
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

MasterClear [1]... Done
 
Top